The modern workplace is dependent on effective communication in order for the employees to be able to execute their tasks. Despite this over half of the new communications-solutions that are inserted to handle an organizations communication needs fail. Therefore this study focuses on the adoption of communication-solutions in the context of the modern workplace. This with the intent of identifying factors that are central to the individuals? adoption of new communication-solutions.

According to a decision of the European Commission, measures are to be taken to reduce the use of energy in the EU. The goal is to reduce it by 20 % compared to the current use. This shall be done to the year 2020 (European Commission, 2011). One industry that use large amounts of energy is the construction of buildings which account for almost a third of the energy use (Brogren, 2012). The major part of the energy that is used in the construction industry is not used when the buildings are built, but rather during the rest of their subsequent lifetime.

The objective of this thesis was to get more knowledge about how to design a dairy farm reducing the working hours and the work tasks whit high work load. I will try to reduce the working hours and the tasks whit high work load on my own farm witch I am about inherit. Today, the old stanchion barn has room for about 60 cows and 74 young cattle and need two men to run it every day. The total acre is 188 hectare, 100 hectare forest, 65 hectare farmlands and 23 hectare natural pasture. I have studied two solutions. In the first solution, I will use my old barn for young cattle and build a new barn for the cows.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

This master thesis is a part of the DySCAS project at ENEA. The purpose of this thesisproject is to add support for streaming media and USB support to the DySCAS demonstratorplatform.To achieve this, some of the widely used middlewares available today were studied. The onethat proved to be of most interest is CORBA. Although CORBA?s solution to streamingmedia couldn?t be used due to their use of object programming, the CORBA solution didprovide some interesting thoughts regarding how the USB devices should be handled, in thiscase their ?resource inspector? and ?trading service?.Ethernet was the chosen network to support streaming media.

This thesis is based on an assignment from a unit within an international group manufacturing industrial products. The purpose of the thesis is to analyze and suggest ways to improve the cost accounting system in use at the unit. The main source of empirical data has been interviews with employees. The theoretical framework is based on a comparison between traditional/standard costing and activity-based costing (ABC). The cost accounting system in use is described in detail and classified as a traditional/standard cost accounting system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.