This paper is a qualitative study on the influence of the residents in a special communitydwelling within the care system for elderly. The purpose of the study is to describe and analyse with a user perspective how particularly staff members but also a group of retired people living in this dwelling interpret and articulate the concept of resident influence. How the retirees can influence the design and the content of the activities and the organization. How today the residents influence is carried out with the ideas and visions of the future.My methods include qualitative structured, semi-structured and non-structured interviews within a general frame of a resident questionnaire. The staff members present the current situation and reflect on the reasons for obstacles for resident influence.The group of retired people who lives in structures originating in the Swedish long-term care system and homes for the elderly tends to adjust to given routines and express a low-voiced wish for increased influence.

This report deals with the design of a controller for SmartMedia? flash memory cards, based on a hardware description found in the SmartMedia? Interface Library - SMIL. The design was made on logic gate level, using standard cells in OrCAD Capture. After simulation of the design in PSpice A/D, it was exported as an EDIF netlist, which was used to make a chip layout in L-Edit, a layout tool for making integrated circuits. The layout was made using a method called Standard Place and Route - SPR, where the layout tool places standard cells from a library and connects them according to the EDIF netlist.

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.

Detta kandidatarbetet är utfört på ett bolag som verkar i telekommunikationsbranschen. Operatörerna på kundtjänst arbetar med att ta emot samtal från Telekombolagets kunder, hjälpa dem med att lösa problem och ge tips och råd. En viktig del av arbetet är att operatörerna gör en analys av kunden för att kunna ge bästa möjliga råd. Rapporten behandlar hur en del av ett textbaserat program kan omarbetas till en grafisk applikation. Etnografiska metoder, i form av observationsstudier och intervjuer, och designtekniker, i form av mockup- och prototypmöten, har använts tillsammans med användarna av programmet.

Ett konsultföretag får in anbudsförfrågningar och måste därmed göra kalkyler för dessa förfrågningar. Med hjälp av ett webbaserat system där en anställd kan göra kalkyleringar kan företaget få ett gemensamt sätt att arbeta och uppföljningen underlättas. Systemet som har skapats ger användare möjlighet att göra anbudskalkyler genom en överskådlig och lättarbetad webbsida, där man kan se förhållandet mellan företagets kostnad gentemot kundpriset. All information lagras persistent i en databas för att möjliggöra uppföljning och synkronisering med andra system som används på företaget..

Background: Budgets has always been a main factor for the management of organisations. Yet, lately has the role of budgets been increasingly questioned. But how is an organisation managed without budgets and what other alternatives can be used? And can these instruments work more effective?Purpose: The purpose of this essay is to describe how non-budget management distinguish compare to traditional management and how to design an effective non-budget system of management. Furthermore we intend to explain the reasons to such management and to present a model for how such a management can be performed.Research method: Empirical material has been performed based on seven interviews with persons within Svenska Handelsbanken.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

Syftet med projektet är att ta fram en metod för optimering av cellodlingsmedia som kan minska den tid och de resurser som dagens metoder kräver. Fem stamlösningar med adekvata komponenter designas och kombineras med olika flödeshastigheter till ett medium. Kombinationerna testas med experimentell design och analyseras med multivariat dataanalys för att få fram optimerade cellmedia.Odlingsmetoden som de fem stamlösningarna anpassas till är fed-batch, ett system där en av lösningarna är en baslösning och de resterande fyra designas till feedlösningar. De senare tillsätts i olika hastigheter till baslösningen anpassat efter cellernas näringsbehov. Strategin som har lagts upp för att designa stamlösningarna bygger på förhållandet mellan komponenternas förbrukningshastighet i de olika tillväxtfaserna.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

This paper presents the creation of a strengthening visual profile for StretchFlex UF. The project consists of an external as well as an internal part. The external part is on the order of the company StretchFlex. The company is created under the education concept by the name of Ung Företagsverksamhet (Young Entrepreneurship) and has passed on to the Swedish Championships in Young Entrepreneurship at the Stockholm International Fairs. Of that we have been commissioned to develop an updated logotype for the company, for the current does not keep proper quality according to the client.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

I föreliggande studie undersöks hur användare upplever användbarheten i ett säkerhetskritiskt system ? Luftfartsverkets flygledningssystem SIGMA. Utifrån litteraturstudier definieras begreppen användbarhet och säkerhetskritiska system. Empirin utgörs av intervjuer med användare av SIGMA-systemet. Studien visade att användarna upplever att systemet i väsentliga delar har bra användbarhet, vilket utifrån litteraturstudier, intervjuer och efterföljande analys främst tycks bero på att systemet arbetats fram med stor användarmedverkan och att det var utarbetat specifikt för arbetsplatsen.

Due to the fact that bottled water has negative impact on the environment,Elite Hotel hasdecided to stop serving bottled water in their restaurants. Since Swedish tap water is regarded tohave great quality,Elite Hotel wants to look at the possibilities to carbonate their own sparklingwater and serving it in fancy carafes. This Master of Science thesis is about constructing a costefficient water carbonator system that suits Elite Hotel?s need specification. This thesis alsocovers other water refinement criteria.The work has been divided into three parts.