This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

This thesis aimed to study the interaction between an educational technology system and its users and give suggestions for design improvements. The technology system is called EDIT (Educational Development through Information Technology) and has been developed and applied at Linköping University?s Faculty of Health Science. EDIT supports Problem Based Learning and enables scenarios to be presented through the World Wide Web. The study was divided into two parts.

This report describes how the process has evolved during the creation of a new web page forthe company Scandinavian Travel Agent DMC. The design methods that have been used aredescribed and also how parts of the webpage have been created by using the design methodresults. Our reflections around design and functionality are explained and how usability hasbeen our main focus during the master thesis. We also describe how it has been to work withan external costumer and how the tasks constantly have changed and been added as theprocess has continued.The background to this work is that AB Scandinavian Travel Agent DMC need to improve theircurrent web page. This to give the clients better needed information about destinations, butalso to stand out in the competitive travel business.

Varje dag interagerar samhället med nya produkter och system som måste varaanvändbara och därför är användbarhet är ett viktigt begrepp i detta sammanhang. Föratt enklare integrera användbarhet i utvecklingsprocesserna för dessa produkter ochsystem, används ISO-standarden för användarcentrerad design.Syftet med denna studie är att undersöka huruvida Monitor ERP System AB bedrevanvändarcentrerad design i utvecklingsprocessen av deras mobila applikation - MonitorMobile. Som hjälp i denna utredning används ISO-standarden för användbarhet ochanvändarcentrerad design. För att besvara problemformuleringen, har jag genomfört enretrospektiv studie och intervjuer med beställare och utvecklare. För att sluta sammanutredningen har jag också skickat ut en enkät till användarna.Resultatet visar att Monitor är villig att arbeta nära användarna, men de introducerardem inte i processen.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.