Data retrieved from airborne laser scanning represents a new source of forest data. Today, the technology has matured so that it can function in an operational environment. The aim of this study was to compile areas of application of laserdata in forestry. Moreover to analyze costs and accessibility of laserdata. The goal was to provide private forest owners information to support assessments of possible benefits of laserdata.

In order to produce grain in an economically rational manner numerous decisions have to be made. One of these decisions is what tillage system to use. The cost of the tillage system is a large part of the total cost in grain production. Different tillage systems result in different distribution of fixed costs, operating costs and timeliness costs. The price of the produced grain and cost of inputs also affect the best way to produce grain.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

With the globalization, companies in the West chose to shift production to developing countries to cut down costs. This had a major impact when child labor and very poor working conditions in these factories were discovered and led many companies to take responsibility for their suppliers and the employees by adopting voluntary so-called Codes of Conduct.There is a subtle balance to enforce improvement of working conditions for employees at suppliers´ factories and to keep costs down. On the one hand, companies would like to conduct extensive audits at their suppliers to ensure code of conduct compliance and thus protect their legitimacy. On the other hand, audits are expensive so companies would like to minimize audits to keep costs down. Companies thus have to strike a delicate balance in relation to how many and what suppliers they choose to audit.

Master's thesis, Master of Business Administration program, School of Business ofEconomics at Linnaeus University, Management, Course code, 4FE10EAuthors: Anton Milemo and Christoffer WideénTutor: Magnus ForslundTitle: Focus on employee turnover - an ethnographic study on the insurance companyTrygg-Hansa?s outbound department in VäxjöBackground: The costs of losing employees, recruiting new people, making a selectionof potential employees and training them are all high. The costs often exceed onehundred percent of the annual salary for the otherwise vacant position. In addition to thedirect costs of employee turnover troubles, things such as work confusion, loss oforganizational memory along with strategic skills can arise. The employee turnover rateof Trygg-Hansa?s outbound department in Växjö is too high according to the officemanager.Purpose: Understand the causes of high employee turnover in a Swedish insurancecompany.Methodology: This thesis consists of an ethnographic study of a Swedish insurancecompany.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

Since some years Linköping has invested in biogas production, mainly from offal's, residuals from food industry and manure. The municipality goes for biogas in the local traffic and in all transportation. It is also possible for private car owners to run their cars on biogas. The purpose of this essay is to perform a cost-benefit analysis and examine if the project has been beneficial from a social point of view. The effects have been identified, measured and monetarily valued. The essay is limited to include the year of 2006 only.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

In this study we try to focus on the costs for wear parts on different type of soil tillage machines and at Väderstad Rapid drilling machine. We have studied some of the leading types of cultivators and disk harrows. Among the cultivators we have investigated Väderstad Cultus, Dalbo Dinkomax, Horsch Tiger and Terrano. At disk harrow we have looked at Amazone Catros and Väderstad Carrier. We have made more detailed study on costs for wear parts, working depth, driving speed and diesel consumption.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

This report will point out the income for a scania plant production farm, this has been estimated through a case study. The outcome of this report will later be used to calculate a reasonable leasehold charge. This case study is solitary based upon this particular studied farm, at this very point, and can therefore not be used as a general guide. The reason why this particular scania plant production farm has been selected, is because the author is born and raised at the farm and has the intention to run the farm in the future. The chosen farm for this report is based in the southwest of scania and cover 300 hectare of plant production. The crop rotation consists of autumn wheat, sugar beats, spring wheat, spring barely, winter rape and fallow. The farm owns all machinery required.

Data retrieved from airborne laser scanning represents a new source of forest data. Today, the technology has matured so that it can function in an operational environment. The aim of this study was to compile areas of application of laserdata in forestry. Moreover to analyze costs and accessibility of laserdata. The goal was to provide private forest owners information to support assessments of possible benefits of laserdata.

There is an increased pressure for firms to provide the financial market with additional information. Such disclosure is attached with different kinds of costs. In spite of these costs, and in spite of increased mandatory disclosures, firms choose to voluntary disclosure financial information to analysts and others. This indicates that firms also benefit from providing additional information. The subjects of this study is 431 annual reports from firms listed at the Stockholm Stock Exchange for 2002 and 2005 and the objective is to survey factors that can explain variations in firms? voluntary disclosure.

Companies that sell digital products such as software and movies transfer large amounts of data to its customers. In order to send this amount of data using FTP or HTTP and still maintain a high speed transfer rate it is required that the company have a large number of servers and a huge bandwidth. Servers and bandwidth costs money which means they have great costs on the distribution of their products. In order to reduce distribution costs, P2P technology can be used and the most powerful technology to transmit popular files is called BitTorrent.BitTorrent requires users to share their bandwidth. Nowadays, BitTorrent is frequently used to transfer products that are free of charge; one example is the Linux distribution Ubuntu.