At the time being there is limited experience within turbine decommissioning in Sweden and the economic effects are unknown. Despite this, there are expectations that revenues generated by sales of materials will cover decommissioning costs. The model developed identifies thirteen parameters that vary between different types of turbines and that affect the economic consequences of decommissioning. The three most important parameters are turbine location, tower material, and the scope of decommissioning. Trends in the wind energy industry show that these three factors are developing in a manner that increases decommissioning costs dramatically.

This thesis approaches the problem of estimating the arm angles of an industrial robot with flexibilities in joints and links. Due to cost-cutting efforts in the industrial robots industry, weaker components and more cost-effective structures have been introduced which in turn has led to problems with flexibilities, nonlinearities and friction. In order to handle these challenging dynamic problems and achieve high accuracy this study introduces state observers to estimate the tool position.The observers use measurements of the motor angles and an accelerometer and the different evaluated observers are based on an Extended Kalman Filter and a deterministic variant. They have been evaluated in experiments on an industrial robot with two degrees of freedom. The experimental verification shows that the state estimates can be highly accurate for medium frequency motions, ranging from 3-30Hz.

Title: Relationship building and management ? Aligning the Advertising Agency-Client Relationship Seminar date: 2006-01-13 Course: Bachelor thesis in Business Administration 10 Swedish credits. Authors: Ryan Eriksson, Louise Hagströmer, Peter Irinarchos. Advisors: Christer Kedström, Catharina Norén. Keywords: Relationship building and management, Transaction cost, Network theory, Resource based theory and Advertising agency.

The Island of Öland has one of the best wind climates for land based wind power in Sweden. An objective for the Island is to become self sufficient using electricity from renewable source of energy such as wind. There is currently 55 MW capacity installed on the Island and it is estimated that grid congestion will occasionally occur if more than 135 MW was installed.The aim of this thesis is to investigate he possibilities for load management by smart charging of electric vehicles, EV. The definition of smart charging is that the charging is done to some extent with an ICT-system, (information and communication technology) that correlates wind electricity generation to the charging of electric vehicles. The purpose is to avoid grid congestions on the sub-sea cable that connects Öland to the mainland because that in turn would curtail wind energy production.

Calculations of net present value are based on a discount rate, which requires knowledge about the company?s cost of debt. A common way to do this is by observing the company?s credit rating, when no credit rating is given it?s possible to use a synthetic rating model based on quantitative data to estimate a credit rating. Thus, the aim of this study is to increase the understanding of which quantitative data, in terms of key figures, that can be used to explain the given credit ratings for companies from the Nordic countries.In developing the model, key figures found significant in previous studies are being tested for whether or not they are applicable for companies from the Nordic countries.

Folkhälsovetenskapligt program.

The Swedish road transport sector relies almost completely on fossil fuels. In 2007, as much as 96 percent of the total sales of fuels was made up of petrol and diesel, while at the same time the share of total emissions of greenhouse gases in Sweden that came from road transports amounted to close to 30 per cent. Sweden is by no means worse off than any other European country in these respects. In order to address the questions of high oil dependence and CO2 emissions the European Commission has proposed a reinforcement of the legislative framework, with a 10 percent minimum for the market share of biofuels in 2020. Furthermore, the proposed target is binding for the member states, unlike the current voluntary target of 5.75 percent by 2010. More than doubling the usage of biofuels in only a bit more than a decade will most likely not be possible without policy interventions.

Abstract: Title: Communication of and around internal performance reports - A study in seven manufacturing companies based in Blekinge. Authors: Marcus Harrysson and Mikael Johansson. Supervisors: Lars Svensson and Carina Svensson, Blekinge Institute of Technology Department: Department of Business Administration. Course: Bachelor thesis in Business Administration, 10 credits Purpose: Our purpose with the bachelor thesis was to investigate if there is a connection between communication of and around internal performance reports and profitability in companies. Method: Our investigation has been made at seven companies in the county of Blekinge by making personal interviews with people in both production and business departments at each of the companies. Result: We have come to the conclusion that there is a connection between communication of and around internal performance reports and profitability. Sammanfattning Titel: Kommunikation av och runt interna ekonomiska rapporter ? En studie i sju tillverkande Blekingeföretag. Författare: Marcus Harrysson och Mikael Johansson. Handledare: Lars Svensson och Carina Svensson, Blekinge Tekniska Högskola. Institution: Institutionen för Ekonomi och Management Kurs: Kandidatarbete i företagsekonomi, 10 poäng Syfte: Syftet med kandidatuppsatsen är att undersöka om det finns ett samband mellan kommunikation av och runt interna ekonomiska rapporter och lönsamhet. Metod: Vår undersökning har gjorts i sju stycken Blekingeföretag genom personliga intervjuer med representanter för både ekonomi- och produktionsavdelningen på varje företag. Slutsats: Av vår undersökning drar vi slutsatsen att det finns ett samband mellan kommunikation av och runt interna ekonomiska rapporter och lönsamhet i företag..

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

 IAS 40 allows two methods of valuation for investment properties, fair value model and cost model. The purpose of this paper is to investigate what drive property companies to disclose their investment properties at fair value. In order to understand their choice, we use accounting choice theory and the three factors this theory describes, information asymmetry, allowing opportunism and agency costs. To answer our purpose, we have from a qualitative approach performed semi-structured interviews with respondents from five of the largest listed property companies in Sweden. The results suggest that firms have chosen the method that is most effective in the valuation of investment properties.

This paper analyses how Swedish fine-art oil paintings sold at auctions has performed as a monetary investment during the period autumn 1985 until spring 2006. An average price technique as well as a hedonic regression technique, applied to a sample of 19 213 auction sales, is used to construct price indices. The indices show somewhat different results, which is explained by the inability of the average price model to adjust for relative differences in quality between periods. The hedonic regression model on the other hand captures this effect, why the hedonic index is applied in a financial return model. By adjusting for transaction cost, the financial return of an average investment in paintings is calculated.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

Upon marketing the system in Europe and the USA cost savings generated from reduced work force have been prevailing. Since the cost of labour is much lower in the Asia Pacific region other factors have to be stressed. The parameters of flexibility and quality assurance may however cover any initial investment in a production system. Our purpose is to value flexibility and quality in a manufacturing context, applied to DAS, in order to use it in investment calculations. In order to make an adequate estimation of different companies, due to problems associated with acquiring correct figures, the Key Success Factors needs to be examined so that the gathering of numbers can be conducted with more focus.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.