In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

The main ambition of this degree project is to illustrate the fundamental problems of today?s electric tariff regulation and the usage of the analyzing tool; The Network Tariff Model. There is a further discussion of potential problems and clear improvements of the 2012 years proposed network tariff regulation. Interviews have been conducted with specific network companies and Energimarknadsinspektionen. The proposed regulation of 2012 is discussed from the government?s proposition.This paper clearly shows that the authority´s work has been conducted in a very unprofessional manner during the period of The Network Tariff Model.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

The study proceeds from a phenomenom called co-creation. If value can be created, it is logic to asume that it also can be destroyed. This phenomenom has earlier not been applied to long-term relationships such as business to business. In a business relationship it is important to identify factors, that leads to co-destruction, to be able to prevent them from appering. The purpose of this study is to identify which factors leads towards co-destruction.The study have used theories from Echeverri & Skålén (2011) which has designed a model explaning the outcome of co-creation and co-destruction.

Stockholm is growing with almost two fully loaded SL-buses a day. One of the consequences that derive from this is the increase of public transport travelers who put the regionally governed public transport up to the test in terms of its capacity. The Transport administration in Stockholm County initiated 2015 a project with the purpose of simplifying the calculation of bus stop capacities. A hypothesis (set up by the Transport administration) based on that a model for calculation of bus stop capacities could be calibrated for Stockholm conditions is being researched in this bachelor?s essay.The study is implemented by self-collected traffic data from bus stops located in the Stockholm city center.

When driving hard and cornering on a circuit good control of a car?s roll is desired, so the car reaches steady state quickly but yet in a controlled fashion. This control is mainly given by the combination of the cars springs, shock absorbers and anti-roll bars.The aim of this report is to investigate, analyze and measure a Porsche Boxster?s turn in behaviour and roll dynamics as well as with the aid of simulation results give suggestions for improvement of the previous mentioned combination.Two different simulations were made, one based on a simpler model that was based on an evolved version of the bicycle model in Matlab and one was more advanced model in the simulation software rFactor. Measurements of the real car was made using a GPS-based measurement system.

I have made a research about two different methods for introducing small children to Nursery School/Kindergarten. I choose to do this as I have found very little about this in the literature we have studied during my education to become a pre-school teacher.This period in the life of very small children and their parents is a big change in their daily life. The more traditional way to start pre-school is to do it very gradually during two weeks, the two-week method. This means that the parents visit the pre-school together with their child for a very short time, about one hour the first day. After one week they leave their child with the staff for about an hour and at the end of that week they try to leave it full time (6-8 hours).

Modelling of pollutants is commonly used in research and at departments working with environmental issues. The need to use large amounts of data when modelling creates the opportunity for more generalised models with lower data demands. Aggregating functions into coarser elements is a sort of generalisation of actual features in nature.A development of a method and a modelling tool called ?KadmiumKalkylatorn? has been performed to model cadmium pollution in rivers in Skåne, Sweden. The water runoff has been multiplied with cadmium standard concentrations based on membership in landuse classes.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

Den allt hårdare konkurrensen på marknaden gör att det blir alltviktigare för mindre tjänsteföretag att utvärdera sitt val avproduktkalkyl.Syftet med denna uppsats är att undersöka El- Företaget AB:sproduktkalkylering samt ge förslag till eventuella förbättringar genomatt jämföra med befintliga och lämpliga produktkalkyler.Resultatet i denna undersökning visar att påläggskalkylen är den mestlämpade kalkylmetoden för El- Företaget AB. Företaget använder sig avdenna modell idag men i slutsatsen har vi konstaterat att det krävsförbättringar. Dessa förändringar bör genomföras för att företaget iframtiden ska kunna jämföra och kontrollera sina kostnader på ettbättre sätt.Because of the competition on the current service market it is moreimportant to minor service companies to evaluate there choice ofproduct calculation.The purpose is to examine El- Företaget Ab:s product calculation andsuggest possible improvements by comparing with existing andappropriate product calculating- methods.The result in this survey shows that absorption costing method is themost suitable one to use by El- Företaget AB. The company uses thismodel today but through the conclusion we have worked outimprovements. These changes will be made to compare and controltheir cost in a better way in the future..

Lean production is the name given to Toyota?s Production System (TPS) by the west. The continuous improvements of their operations through Lean has made Toyota into the largest car manufacturer in the world. This, in turn, has led to several studies regarding both Toyota and their system as to find ways to apply Lean in other organizations. Even so, over 90 percent of all companies fail to implement Lean.