Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

This paper examines and compares several different sites in Sweden in addition to one in Mexico regarding whether the ecological requirements theses sites have had during planning and construction has affected the design in any way. Is it possible that, for different reasons, one thinks ?like nature? when one thinks of ecology and, if true, how does this reflect on the spatial and structural design? This paper tries to identify if some sort of general design expression is used in projects with requirements on ecological sustainability. In total, five projects have been compared in different areas such as choice of materials and their composition. These projects have an ecologically sustainable processing of water in common, although most also have ecological consideration in other areas as well.

During the 90s most companies organized and adopted routines for their environmental work. This work included for example eco-efficiency improvements and the introduction of environmental managing systems. At the UN conference in Rio in 1992 the concept Sustainable development was defined, but it was not until about the year of 2000 that companies in Sweden shifted their work from environmental management to sustainable management. A consequence of this is that they now have to focus on environmental aspect in conjunction with social and economic aspects.The purpose of this study is to gain understanding of what a change of focus to sustainable development means for companies. Has the environmental work suffered in the competition with social/economical aspects under the new sustainable focus? How will the new way of working affect the balance between environmental and social aspects? Changes were studied in five companies by analysing their annual-, environmental- and sustainability reports and through interviews of sustainable managers.

Sustainable beef and milk consumption. The consumption of beef and dairy products in Sweden is high. A lot of greenhouse gases are emitted from the production of these products. The production of beef in Sweden has decreased but the import has increased. The number of dairy cows has decreased while beef-production with suckler-cows has increased in Sweden.

This study aims to examine how professionals in the field of foster care works with recruitments, assessment and education of family homes for unaccompanied children. The intention is to find out in case there are specific needs that justify specific approach to ensure that the child's best interests are indicative and satisfied. The survey was conducted based on a qualitative method and empirical data gathered through semi-structured interviews with employees in the social services. The result shows that there is a need for more and specific education for families receiving unaccompanied children. It is motivated by the needs and conditions that are often common for this group.

Uppdraget för detta examensarbete består i att utveckla en användarcentrerad designprocess för utformning av ergonomiska arbetsplatser som följer riktlinjer för Lean. Syftet är att studera hur filosofier och styrningsverktyg för Lean produktion, lagkrav i Arbetsmiljölagen och övriga föreskrifter samt ergonomiriktlinjer på ett framgångsrikt sätt kan integreras i produktutvecklingsprocesser. Utgångspunkten för detta arbete är att genomföra en kvalitativ analys av VPS assessment som är en prototyp av en utvärderingsmodell för Volvo Production System (VPS), utvecklad av sakkunniga inom ergonomiområdet på AB Volvo. Målsättningen är att stödja designarbetet så att riktlinjer för Lean, lagkrav i Arbetsmiljölagen och ergonomisk måluppfyllnad ingår i de typiska faserna av en designprocess; förstudie, formulering av kravspecifikation, generering och utvärdering av lösningar samt detaljkonstruktion. Den kvalitativa analysen som genomfördes resulterade i en integrering av aspekter från VPS assessment in i en generell designprocess.

This study aims to examine the regard paid to the use of Assistive Technology (AT) when assessing the knowledge of Year 9 pupils with dyslexia in the subject Swedish. A starting point was to examine the knowledge of a group of teachers in the areas of dyslexia and AT. The issues then developed as to which AT a dyslexic pupil is allowed to use in an assessment situation and how the use of these tools affects the assessment. There was an examination of the guidelines that the teacher group can use as support when assessing the knowledge of dyslexic pupils on the basis of AT. The method used was qualitative semi-structured interviews.

In the school subject of the natural sciences it is imperative that the students are given opportunities to ?talk science?, since the dialogues that occur in the classroom have a significant importance for the students? abilities to engage in meaning-making in their learning process. Hence, the student and teacher interaction in the classroom and the feedback given there play a significant role in the students? learning process. The aim of this study is to contribute to the development of formative assessment tools that can mediate the students? meaning-making in natural sciences subjects in upper-secondary school.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

It has been shown in various research contexts that action programs do not always work as they should, even though there are clear guidelines on how the action programs should be designed and used. The aim of this study is to illustrate which processes that occur before an action program as well as how these processes lead to action that will give the student the support he or she needs. Through qualitative interviews with eight teachers, I have tried to answer the questions that I created. I have tried to answer my research questions that I have made based on the purpose. The questions are; What type of inquiry will be done if a student risk to not reach the knowledge goals? How will the inquiry support the action program? In what way does the action program support pupils in special needs? The result of my survey show that the survey being done for an action program is very individual-focused and that the mapping rarely shows on the teachers role or school environment to students who fall into special needs.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

Background: Corporate Social Responsibility (CSR) is a term that has become increasingly prominent in the corporate world. As the awareness of responsibly produced products is growing among both companies and consumers, it has become increasingly important for companies to get involved in sustainability issues. There may be several reasons why companies choose to integrate CSR in their business, where one reason may be related to company size. In the business category of micro, there is currently no widespread research, which makes this company size interesting to study. The choice of industry was made because coffee is one of the world's most important merchandise, and the coffee industry has come a long way with integrating CSR in comparision to many other industries.Purpose and research question: The purpose of this study is to create a deeper understanding of why coffee roasters in the business category of micro enterprises choose to incorporate CSR in their businesses.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.