When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

Protein is an important component in various milk products and has a crucial role in the final quality. Excluding non-protein nitrogen, bovine milk contains about 3.3% protein whereas about 80% of this fraction consists of casein. There are four major members in the casein family: ?s1-casein, ?s2- casein, ?-casein and ?-casein. Proteolytic enzymes are the cause of degradation of the economically important milk proteins.

Den ökade förändringstakten i samhället på grund av ny teknik, internationalisering och att samhället blivit alltmer mångkulturellt bidrar till att större krav ställs på företag att hela tiden förbättra sin verksamhet. Akzo Nobel Surface Chemistry, Production Surfactants i Stenungsund, har huvudsakligen sina kunder och konkurrenter runt om i Europa. Då Sverige ligger i utkanten av detta område tar det omkring en leveransdag längre tid för Production Surfactants att leverera sina produkter i jämförelse med företagets konkurrenter. Detta medför att Production Surfactants behöver kompensera denna längre leveranstid genom exempelvis högre produktkvalitet, större flexibilitet eller lägre priser för att ha möjlighet att tävla på marknaden. För att uppnå detta behöver Production Surfactants utveckla och systematisera sitt förbättringsarbete.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

The EU's Water Framework Directive aims to a long-term and sustainable use of our water resources and wants to ensure good water quality in Europe's water bodies. Discharge of polluted stormwater into receiving waters can be a threat to their ecological and chemical status. Municipalities are responsible for supervision of the environmental quality standards (EQS) and therefore need to gain knowledge of current stormwater management, the expected level of pollution emissions and possible appropriate purification steps to ensure that the goal of good water quality is achieved.This master thesis aims to provide this knowledge in the example case of Vallentunas urban area and wants to prepare future oversight so that it can be assessed how much the discharge of polluted stormwater into the local receiving water is a threat to its status. With the help of maps, aerial photographs, site observations and individual discussions those areas are mapped where appearance of moderate to highly polluted stormwater could be suspected. The degree of pollution at the discharge points is determined based on land use upstream and uses standard values according to the administrators assistance "Tillsyn av dagvatten" (MSL 2014).The study identifies 100 areas in need of supervision regarding their stormwater management.

This degree project aim to evaluate if variations of the STFI thickness can be used to assess bumpiness on cardboard. During the project cardboard samples were measured using Bendtsen, PPS, a L&W formation tester, OptiTopo, Ambertec formation, the STFI thickness tester and a visual comparison. The different methods were then compared to see if there is any correlations between them. The results showed that the visual comparison and OptiTopo correlates. The STFI thickness tester shows however no correlation with the OptiTopo and visual comparison, thus aren't suitable measuring bumpiness..

The paint market of today is a jungle whit an enormous range of different paint types; there all has different properties and different compositions, some with big influence on the environment and some whit less influence on the environment. It could even be difficult for an expert to always know what should be used on which surface and what would be the best out of the environmental point of view.This work is not intended as a total review of all the manufactures range of colours; only as a deeper dissertation about distemper paint in general, in particular Falu Red Paint. Whit focuses on the environmental issues.The work is especially for those who are ready to paint but don?t know what paint they should chose and people that has a interest in paint and environment, perhaps it also could be of interest for professional painters even when there probably isn?t any big news for them. The information is compiled from the Internet and downloaded brochures from the Internet..

A thesis directed towards Innovationsslussen in Gothenburg about securing, improving and simplifying sitting on the toilet for patients with sitting difficulties. The primary target group for the project is patients who have had a stroke and as a consequence from that suffers from various kind of bodily paralysis.An overall goal was to design an aid that was comprehensive enough that the patient could manage sitting securely on the toilet without have a nurse giving physical support during defecation.Five conceptual proposals were developed and evaluated in consultation with Innovationsslussen and one was selected to be further developed.The result was an integrated support at the toilet that facilitates a good sitting posture which minimizes the risk of falling and provides comfortable support when leaning to the side. The product is divided in two with both a redesigned carryingsystem and a new type of support surface adapted for the purpose..

Thermography is the assesment of the surface temperature of the horses body and it falls into the categori of physiological imaging. Thermography allows us to portray inflammation and changes in sympathetic tone in a graphical manner. The purpose of this study was to review thermography in equine medicine and to evaluate thermography as an aid in the diagnosis of lamness in horses. Thermography has been helpful to identyfy sprains, stress fractures, shin splints and soft tissue, tendon, ligamentous and nerv injuries and to monitor healing processes during rehabilitation. Routine thermography may reveal inflammatory responses prior to clinical signs. In present study thermograpy gave especially valuabel information in two cases. In one horse reduced blood flow in a. saphena due to a thrombosis were visualised and in the other horse bilateral thoracolumbal radiculopati was diagnosed.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Södra Skogsägarna and the aim of the work was to investigate the economical and biological output after mechanical planting with Eco-Planter compared with traditional manual planting. Eco-Planter is a tool for mechanized planting, fixed at the end of the boom on a conventional harvester. The study confirms that manual planting is less expensive under normal conditions. However, the differences between mechanized and manual planting are not that big and with technical development and/or increased labor costs together with an improved work organization the system with Eco-Planter could be competitive. The biological output, e.g. planting result and survival rate, seems to be quite good.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

The ability to detect protein-based biomarkers, which are linked to different diseases like colorectal cancer, is very important as a diagnostic tool. Usually complex biological samples like blood are studied which will contribute to different technical issues when performing an assay. The aim with the project is to optimize and develop the high throughput protein detection technique Proximity Extension Assay, PEA, into a 96-plex panel, in hopes of discovering an expression profile for colorectal cancer. PEA was developed by Olink Bioscience and allows specific proteins in a sample to be quantitatively transformed into nucleic acid sequences that are subsequently detected and quantified with real-time PCR. Two proximity probes containing oligonucleotide sequences bind pairwise to target protein and when brought in proximity, a DNA polymerase will extend a hybridization arm from one probe over to the second forming a double-stranded DNA sequence that can serve as a template in real-time PCR.