During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink.

Working with a three-dimensional shape that adjusts light seemed exciting. Venetian blinds became a basis and source of inspiration in my project. What is a Venetian blind? I arrived at the de?nition ?a surface of angleble pieces for sun adjustment?. From that simpli?ed meaning I started making sketches of what an alternative model could look like.

HAFA Bathroom Group has given us the assignment to develop a standardized back panel for their bathroom cabinets. This cabinet is going to be applied to most of their current and future cabinet solutions. To this point, they have constructed unique suspensions-and back panels for most of their cabinet models. They have also been forced to pull wiring and assemble the cabinets differently because of factors like; position of the wall sockets, dimensions of the cabinets and their shapes.The company wants to distance themselves from their current solution, firstly because the cost of having manpower to design each individual suspension solution, secondly because they will save a lot of money when the manufacturing process requires a minimum of components to be constructed. As a result of this, the company can use their resources better to develop future products.The main idea is that the consumer isn?t required to change the suspension or back panel when they decide to buy a new cabinet.

The incineration of waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is collected and checked.

When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

Den ökade förändringstakten i samhället på grund av ny teknik, internationalisering och att samhället blivit alltmer mångkulturellt bidrar till att större krav ställs på företag att hela tiden förbättra sin verksamhet. Akzo Nobel Surface Chemistry, Production Surfactants i Stenungsund, har huvudsakligen sina kunder och konkurrenter runt om i Europa. Då Sverige ligger i utkanten av detta område tar det omkring en leveransdag längre tid för Production Surfactants att leverera sina produkter i jämförelse med företagets konkurrenter. Detta medför att Production Surfactants behöver kompensera denna längre leveranstid genom exempelvis högre produktkvalitet, större flexibilitet eller lägre priser för att ha möjlighet att tävla på marknaden. För att uppnå detta behöver Production Surfactants utveckla och systematisera sitt förbättringsarbete.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

The EU's Water Framework Directive aims to a long-term and sustainable use of our water resources and wants to ensure good water quality in Europe's water bodies. Discharge of polluted stormwater into receiving waters can be a threat to their ecological and chemical status. Municipalities are responsible for supervision of the environmental quality standards (EQS) and therefore need to gain knowledge of current stormwater management, the expected level of pollution emissions and possible appropriate purification steps to ensure that the goal of good water quality is achieved.This master thesis aims to provide this knowledge in the example case of Vallentunas urban area and wants to prepare future oversight so that it can be assessed how much the discharge of polluted stormwater into the local receiving water is a threat to its status. With the help of maps, aerial photographs, site observations and individual discussions those areas are mapped where appearance of moderate to highly polluted stormwater could be suspected. The degree of pollution at the discharge points is determined based on land use upstream and uses standard values according to the administrators assistance "Tillsyn av dagvatten" (MSL 2014).The study identifies 100 areas in need of supervision regarding their stormwater management.

Context: Lip-to-Lift (L-t-L) is a bedside-method for measuring oral transit time at swallow. It was designed for a swallowing examination of persons on nursing homes where weight loss was noted in people with average L-t-L-time >5 seconds (Sandin, 2005). The measurement was validated and evaluated by Eriksson, Bremer Zerpe (2008).Objectives: The study objective was to examine L-t-L on a group of young adults without swallowing disorders and as to examine the inter- and intra-judgereliability of the measure.Questions:What is the L-t-L-time for young adults without swallowing disorders?Are there any gender differences regarding L-t-L-time?How high is the inter/intra-judge reliability of L-t-L?Method: Examination of L-t-L-time was carried out on 20 young adults, aged 19-27 years, without swallowing disorders after Sandin?s (2005) instructions. Measurements of 20 swallows per person were made.Results: The average L-t-L-time of young adults without deglutition-difficulties was 1.13 seconds (sd =.14).

This degree project aim to evaluate if variations of the STFI thickness can be used to assess bumpiness on cardboard. During the project cardboard samples were measured using Bendtsen, PPS, a L&W formation tester, OptiTopo, Ambertec formation, the STFI thickness tester and a visual comparison. The different methods were then compared to see if there is any correlations between them. The results showed that the visual comparison and OptiTopo correlates. The STFI thickness tester shows however no correlation with the OptiTopo and visual comparison, thus aren't suitable measuring bumpiness..