Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was Suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

Because of an increasing demand from customers and changing external environment, there is a need for continuous improvements, for both manufacturing and service organizations, to meet these demands. Manufacturing organizations have been working systematically with quality improvements for a long time, but it has not been as common for service organizations. Because of that the methods to use for implementation of the systematic improvements have not been designed to fit service organizations, and not either for public organizations. The purpose of this thesis is to explain if and why the Swedish Road Administration?s organizational culture and handling of ideas and deviation support an implementation of continuous improvement management.

The aim of this work is to take the first step into a development process, with the intention to find a way of making prehistoric soil fertility a variable in archaeological landscape analysis. A pilot study is performed on the Mälar basin area, where four topographical and geological factors are reclassified and then combined, resulting in a map which expresses a relative indication of agriculture potential. The map is then compared to the distribution of Migration Period graves and gold finds. This, however, does not mean that the technique is tied to a certain prehistoric period. Because the work is intrinsically experimental, the technique as a whole is finally discussed and evaluated, and suggestions of improvements and further studies are made..

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

Quality is the key to a well executed product or service. The construction industry hasn?t highlighted the quality in recent times which have contributed to the construction industry receiving much criticism in the field. The public sees it as an offhanded industry where errors and delays are common.The reason for this is considered to be primarily the lack of time, constant pressure to reduce costs and skills and the ability to communicate between the parties about what the correct quality really means. The industry has begun to realize that it must start setting clearer standards and that there are great opportunities for improvement.This report will give Peab an opportunity to develop their quality work.

Aqeri has since the past year a new profile with name and logotype, which has createda need for an updated visual product identity. The company is a leading developer,producer and distributer of IT products suitable for extreme environments in industry,defense and vehicles. This new profile with the different segments has together with aproduct identity from two companies resulted in that they have no clear designidentity on their products. From this background the aim of this research is todetermine how a development of a design identity is done to implement it to Aqeri.The design identity can be defined as a product?s identity visualized through its formor appearance which defines what the product is.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

In almost every workplace today IT-systems have strong and significant roll in theeveryday work. It is therefore important that the systems have a good functionalityand that they work as an aid for the users. This thesis aims to study the systems atthe company Telge Nät and to analyse them from a usability perspective. By using thisperspective it has been obvious how difficult it is to make improvements on usability,once the system is in place. Even other larger improvements of the systems aredifficult to make at this stage and this is something that the users are aware of.

In the fall of 2014 a literature review and a scientific study of the topic; "... in the extent to which companies in the industry applies the evaluation of continuous improvement? was conducted at Mälardalen University. These studies are the foundation of this thesis.A strategic improvement is often divided into smaller steps of improvements at each hierarchical level from the top down through the organization. But if there is no response system that can confirm the results of these improvements back through the organization it is very hard to see if the improvements really are improvements or just changes and a waste of resources.

This master?s thesis report is a summary of the analysis performed together with ITAB Shop Concept located in Jönköping, Sweden. As a last element of the Master?s program at the School of Engineering, this 20 point level D thesis project has been the final work to bring my education to an end.ITAB Shop Concept expressed an aspiration that the Shop Counter Program B10/B11 should undergo an analysis to point out and possibly lead to improvement.Through interviews and data collection proposals for possible improvements has been drawn up and the analysis points out current deficiencies. By following the idea generation, proposals to solutions for every individual problem is presented.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

There are several ways of conducting software testing where some may include users and others may include personnel whose work task is to execute test on systems. Although most developers and project managers understand the point of testing the system, it is not always being done and the most common reason is that there is no time for it. However, this is a false assumption as it may instead cause some bugs in the system that would not have been there in the first place if tests had been there to prevent bugs in the code.My purpose for this thesis was to find suggestions for changes in the development process in an ongoing project used by Acino and Svenska Försäkringsfabriken in order to increase the quality of the system used. In this thesis, I have approached the purpose by pursuing a case study of the two companies through observation and interviews. By doing this I acquired the relevant information to make suggestions for change.

For a long time Lean has been a well-known concept among manufacturers. Theinterest of understanding Lean and the ability to implement it is common amongcompanies. The concept of Lean, used in the right way, can help companies to reducetheir lead times, their complexity and increase the efficiency of the working processes(Hyer och Wemmerlöv, 2002). Unfortunately the work towards increased efficiencyhas primarily been focused on manufacturing and plant work, resulting in that Leanhas been adjusted to these areas. The conclusion of this is that companies don´tprioritize to improve processes such as administrative ones.