E.ON Elnät has in their project Operational Performance developed a priority tool forconstruction and operation. The tool will help the users to increase the capability to prioritybetween new development projects and removal of faults. The tool can be seen as a measuringfor different bay?s reliability, size and the community usefulness. The result of the priority isdirectly connected to which calibration that is chosen in the tool.The priority tool is still under development and there is therefore an uncertainty about howsensitive the tool is for changes in the calibration.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

This BSc thesis is an introductory step to the collaboration between the Swedish zoo Skansen and Kenya Wildlife Service (KWS). It constitutes of an inventory of the Nairobi Animal Orphanage (AO), a facility that cares for injured and abandoned wildlife species in Kenya. Through the cooperation with Skansen, the KWS will improve their management of the AO. The aim of the inventory and BSc theses is to evaluate the management of black-backed jackal (Canis mesomelas), lion (Panthera leo) and patas monkey (Erythrocebus patas) regarding their biological needs. The general enclosures, routines and feeding at the AO are also evaluated since they have a great influence on the management of captive animals.

The purpose of this thesis has been to investigate the effect of introducing the qualitystandard ISO 9001:2000 at Metso Paper Service in Sundsvall. The investigation has been focused on implementation of the new method of work, Continuous improvements. The implementation has been studied in a case study with both a qualitative and quantitative method. Continuous Improvements is a way of working focused on continuously increasing the efficiency and having the purpose of achieving the formulated goals. This is often accomplished by the organisation carrying out the changing process to a great extent in small but efficient teams.

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues Suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Thermia Värme AB is one of the market leading manufactures of heat pumps. In order tomaintain this position, the company wants to improve the vibration characteristics of theirproducts. The aim of this thesis is to develop product design changes that lead to a reductionof vibrations in the heat pump Thermia Diplomat 8.The main cause for vibrations in the system is flow pulsation and mechanical forces inducedby the scroll compressor. Vibration is transmitted through the compressor piping and receivedby the heat exchangers, from where it is further transmitted to the connection points for theradiator and heat source circuits.A number of design changes in order to improve the vibration characteristics have beenevaluated through calculations and practical experiments. The changes have included thecompressor and heat exchanger mountings, the compressor suction and discharge line pipingand also pulsation dampening.The results of the experiments show that the vibration levels in the connections for the heatingand brine circuits can be decreased strikingly through changes in suction and discharge linepiping.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Scania is among the leading companies in the heavy vehicle industry. Scania also assemble engines for their trucks and buses, as well as to external marine and industrial applications. Wrongly assembled parts leads to quality problems, which makes it important to secure that the assembly is correct. To do this Design For Assembly (DFA) is used to describe how parts should become easier to assemble. Scania?s production unit for engine assembly has had a working method for DFA in the shape of a checklist, which is not used.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Environmental issues is now taking a growing place in society and to ensure that companies meet public expectations and do their part in working towards a sustainable development, environmental management system is said to be an effective tool (Almgren & Brorson, 2009).This case study has examined a company's environmental management system in order to find strengths and weaknesses within the ISO 14001 system. The work was carried out using interviews, document reviews and analyzes in which the three main concepts control the report ; "daily work", "audit" and "environmental aspects".The results shows that the daily work looks different depending on where you are; in the production or at the office. The audit examined all documents related to the environmental management system and the study showed that the biggest strengths was the commitment and waste handling while areas such as environmental goals and management review needed improvement. As a result of the deficiencies identified, Suggestions for improvements was proposed. The investigation of the routine of the environmental aspects showed an incomplete routine where the red wire from identification to evaluation was missing.

To conclude this year?s introductory course in Mechatronics the students, in groups of 6,constructed a prototype based on the technical requirements established by the course teachers.This year they consisted of the following: two wheels only, active balancing, remote controlledand able to stop when crossing a pre-determined marker on the ground. The project lasted for 7weeks and the result is a working prototype and this report.The report reviews the chosen solution, subsystems and the finished prototype as well asSuggestions for improvements, discussion and analysis.The prototype constructed embodied most of the group?s earlier individual technical specialtiesand consists of the following: a flywheel for balancing, ultrasound for angle measurement, areflective photomicrosensor to detect the marker and Bluetooth for the hand control..