There are today large amounts of contaminated sediments in the Baltic Sea. These contaminants are the result of many years industrial activity where the contaminants have not been taken care of and just released out in the water. When ports want to dredge in their fairways and harbor areas the contaminated sediments need to be considered since they are a environmental risk. The development in this area has been slow and new techniques have just recently made its way into dredging operations in the Baltic Sea region. As a result of this there are no clear methods for implementing new techniques today.

This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..

This thesis discusses how companies work with internal marketing to increase personnel motivation and comfort, and how internal marketing and employee rewards are valued by companies? management. Issues addressed include: the link between employee satisfaction and the success of companies: how to work successfully with internal marketing: the value of different kinds of rewards for personnel: the importance of communication and information. By studying literature and theories about these issues and also interviewing personnel managers in two different companies we have learnt that companies use internal marketing with awareness and thought. We also learnt that company leaders value employee rewards very high, although there is a different in what sort of rewards they value the most..

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Att skapa genom att koda är ett nytt och spännande sätt att gestalta konst, lära sig att koda eller bara ha roligt. Denna rapports syfte är att utforska hur en sådan upplevelse kan göras mer interaktiv och intuitiv för användaren samt hur sådan funktionalitet kan implementeras. Som bas för detta ligger en explorativ fallstudie av det arbete som projektgruppen har utfört för att förbättra hemsidan för CodeArt.Det visar sig att ökad användarupplevelse kan uppnås med hjälp av implementation av olika verktyg och funktioner, i detta fall livekodning, versionshantering, hjälptexter och ett loggningsverktyg..

The economical and judicial cooperation that EU constitutes results in that there is an increasing amount of international disputes arising. These international disputes in turn result in questions concerning private international law. The principle of mutual trust is not only an important principle in the entire judicial cooperation but especially important in the area of private international law. The principle means that the member states have to trust each other and the different legal systems. The aim of the principle is to ensure a well functioning internal market that is permeated by free circulation and freedom of establishment.

Small and Medium sized Enterprises (SMEs) within the European Union are currently facing many challenges one being access to financing due to high risk and probability of default, another being cross-border taxation issues with double taxation and information asymmetry. Since the aim within the EU is to be the most competitive and dynamic knowledge-based economy in the world with sustainable economic growth and social cohesion it is essential that the EU operates as a single market. Despite this need, harmonization continues to be far from achieved in the area of direct taxation which also affects the integration and growth opportunities for SMEs. In the Agenda for Entrepreneurship, the Home State Taxation regime, which is based on formula apportionment, has been proposed by the Commission as one option in order to mutually recognize the different Member States? taxation systems to facilitate cross-border activities and reduce ?red-tape?.

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

 AbstractTitle                                      Continuous improvement ? Motivating ICA´s  personnel to    a greater engagement.Problem                                  Getting ICA: s employees involved with continuing improvements.Purpose                                  To motivate ICA: s employees to a higher degree of commitment and    contributing with ideas and embracing approved improvements. Research questions   - How should the employees be properly motivated to contribute with   suggestions for improvement?  - What message and content should improvements send to inspire the   employees? - Witch channels should be used to capture the employee?s attention? - How can best practice be recognized and how can the knowledge be spread  through the organization?Methodology                          Initially a theory study was completed and from the results a case study were  conducted.Conclusion                             Combining success factors for continuing improvements.  To get the      employees feeling appreciated with their work. Results             By combining ten sucessfactors and trying to see the whole picture.                .

Customer satisfaction is a key aspect for many corporations, among them Exacta Distributionscenter. To raise their customer satisfaction, we have researched ways to raise customer satisfaction through the implementation of an error-handling system and recommendations on how the organization should function in the future. This paper describes how these recommendations and the application has been developed, through help in existing theories. This results in a customer portal with the main purpose to provide help in handling orders with errors, and several routines recommended to Exacta Distributionscenter. .

Detta arbete har som utgångspunkt att specificera, implementera och utvärdera ett verktyg som har som syfte att ta fram resultat från frågeställningar mot registrerade data från flygplanssimulator. Detta görs genom framtagning av kravspecifikation och en iterativ programutvecklingsmetod. Ett utvärderingstest i simulator utfördes för att samla data som sedan analyserades med verktyget. Detta för att undersöka om det går att hitta tillfällen där hög kognitiv belastning upplevdes..