The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

Purpose: The purpose of this thesis is to clarify and evaluate the concept of scenario planning.Methodology: Our research methodology has a qualitative approach and uses deductive reasoning. The theoretical field of strategy formulation has been reviewed and in specific the concept scenario planning was unravelled and mapped. Thereafter, our model was tested in a case study where the empirical data was collected through personal interviews. Theoretical field: Literature and articles from the strategic management field have been reviewed with a focus on strategy formulation, scenario planning and Williamson?s theory for the creation of a portfolio for strategic options.Empirical base: Personal interviews and secondary sources such as financial reports, articles mainly from industry media and articles found in the databases ELIN and Affärsdata.Analysis: The analysis work constitutes the testing of our model for scenario planning, integrated into Williamson?s portfolio of strategic options for the future.Result: The work has resulted in a clarified model of scenario planning with links to strategic management schools.

This essay is about power in the classroom. It is about the power dimension of the student-teacher relationships that arise in that space. The overall aim has been to investigate which categories are fruitful in a power analysis of these relationships. My aim has therefore been to develop power categories and to use them to identify and to categorise cases of power interaction that take place between those particular actors in that particular setting.In order to gather material for my study I have both read literature that approaches the study of the student-teacher relationships from a power perspective and done a series of observations in a high school.My theoretical frame comprises a concept of power and a series of power categories. These categories include strength, authority, inducement, coercion, violence, resistance as well as to possess power, to have power, to exert power, the scope of power and the base of power.

A crisis situation that has been more commonly occurred in the industry of conveniencegoods lately is the product related crises which thereby has become a challenge for everymarketer to handle. As the negative publicity tend to enlarge the crisis and spread to thecategory as a whole, it's not only important to have a crisis management to handle crisesconcerning the company itself. But also to be ready to make the best out of the situationwhere the company is threatened to get infected by the negative effects caused by acompetitor.When companies get the chance to make a response on the negative publicity on theircompetitor, as well as the category, through media, the question is - shall they act And howshall they act Which response is the most effective to send out to get out of involvement, notget infected by negative spill over's or even - to make the valenced comparison a way togenerate positive effects and gain market share The purpose of this paper is thereby to find the optimal strategy for an organization in theindustry to handle their competitor's crises through a pronouncement in media. Anotherpurpose to address is whether the brand strength is moderating the effects from the differenttypes of responses tested in this study. This purpose aims to find guidelines depending onthese moderating effects.The paper commodiously, strongly supports that there are beneficial effects to be generatedfrom making a response in either positive or negative direction in oppose of actively choosingnot to make a pronouncement at all.

The aim of the study was to install a biogas system consisting of three tubular polyethylene biogas digesters at a rural household in Malawi and to evaluate the constructed biogas system with regards to relevant system parameters. The purpose was to evaluate if the technology is a possible solution to reduce deforestation and support Malawi in climate change mitigation and adaptation. The study was carried out in the southern part of Malawi in cooperation with the University of Malawi. Locally available materials were used to construct and install the system. Three different feed materials, cow, goat and a mix of cow and goat manure, were used in order to determine which one was best suited to utilise as a digester substrate. After the installation, measurements of temperature, pH, biogas production, biogas composition and system functionality were made. The results of the study show that a biogas system with tubular polyethylene biogas digesters can be successfully installed at a rural household and that the most suitable feed material is a mix of cow and goat manure.

 Background: Earlier studies show that 30-92 % of ACL reconstructed return to their pre-injury physical activity. It is not clear why some people do not return.Purpose: The purpose of this study was to investigate the return rate to pre-injury sport among ACL reconstructed men. Another purpose was to characterize those patients who return and those who do not.Metod: A Web-based questionnaire with questions about returning to physical activity was sent out during the spring of 2012 to 93 men who had undergone an ACL reconstruction 6-40 months earlier and who, after 6-40 months after surgery, were evaluated with validated strength tests and self-assessment outcome measures.Results: At 12 months after surgery 56 % of the subjects had returned to their pre-injury sport. If the criteria were set higher ?back to the same- or a higher level? 14 % had returned.

Alfa Laval?s strategy is to focus on modularized product platforms. Several benefits areforeseen, reduced lead-time, less costs, shorter Time To Market and better quality.Development and verifying will be carried out on block level. Today the separators arebeing tested as a complete unit. A number of factors affect the test results and problemsthat are encountered can be hard to identify.

This report is about a thesis that is performed in and for SYSteam Engineering AB in Motala. The thesis work is divided into three parts, study of the market, programming and electronics. The study part consists of examining and comparing different data acquisition systems for testing of different circuit boards, taking into account the modularity, real-time applications, mobility, environmental, interface hardware and software, to be able to define a general module-based data acquisition system in both hardware and software that enables for future developments.The programming part consists of getting started with Visual Studio, which integrates the Measurement Studio for C#. NET. Measurement Studio includes classes and user controls for testing and measuring and offers tools for acquisition, analysis and presentation of real world data.

BackgroundHeart failure is an increasing chronic disease in the western world due to an aging population and a changed lifestyle. The basic treatment is pharmacological with substantial lifestyle changes. Much is known about physical exercise in middle aged and younger patients but in the patients over the age of 65, little is known. AimThe aim of this study was to investigate the effects of physical exercise on patients aged over 65 with congestive heart failure. MethodA systematic review was undertaken in the databases Cinahl and PubMed.

During the last decade a new technique in animal breeding has developed called genomic selection. It is based on estimations of the effect from genetic markers on traits that are calculated in a reference population. By genotyping individuals, genomic breeding values can then be estimated without phenotypic observations. The aim of this essay is to investigate the response of genomic selection on breeding schemes for dairy cattle. The accuracy of the genomic breeding values is affected by the proportion of observations included in the validation set and how often the equation for estimating breeding values is reevaluated.

The goal of this thesis is to design an attachment between a duct and a pod. A pod is what could be compared to an outboard engine for larger vessels. The pod is placed on the outside of the ship?s hull and can rotate 360 ?. A duct is a large steel ring that can be placed around the propeller on the pod to increasethe propulsion force of the ship in lower velocities.

On 1 January 2005, IFRS (International Financial Reporting Standards)was mandatory for all listed companies within the European Union. The introduction is to create a transparent and consistent reporting. Mainly to provide companies, investors and financiers the same access to world capital markets. Since the introduction of IFRS, the goodwill value is determined by annual impairment tests. If an impairment of goodwill is a fact the goodwill decreases in value.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.