With knowledge of how the southern Swedish forests have been affected by storms the past years, this study intended to find out which factors affect the storm firmness of a stand the most. The study was based on data from stands in the, by the storm Gudrun, affected area. The results of the analyses that tested the stand factors that influence the amount of storm damage to the greatest extent showed that the storm sensitivity of Norway spruce stands were largely due to previous management actions. The factors that could be controlled by thinning and had relevance of storm damage standpoint, according to the results were; the dominant height, volume, basal area weighted mean diameter and stand age at last thinning. In this study, these results are not as clear for Scots pine.

This report contains a programming improvement work in a LabVIEW? fire testing furnace control system for SP Fire Technology in Borås. Here materials and products behaviour are tested and evaluated, being exposed to fire. For this task, UGNET is being used for control and surveillance of the testing furnace system. System hardware has been updated gradually through the years, while the software has been neglected.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

Denna studie undersöker om det är möjligt att införa nåbarhetstestning i en baneditor. Testets syfte är att ersätta manuell testing, det vill säga att bankonstruktören inte ska behöva spela igenom banan för att säkerställa att denne kommer kunna nå alla nåbara positioner.För att kunna utföra studien skapas en enkel baneditor som testplattform. Vidare utförs en jämförande studie av flera alternativa algoritmer för att fastställa vilken som är mest passande för nåbarhetstestning i en baneditor.Resultatet från den jämförande studien visade att A* (A star) var den mest passande algoritmen för funktionen. Huruvida automatisk testning kan ersätta manuell testning är diskutabelt, men resultatet pekar på en ökad effektivitet i tid när det kommer till banbygge..

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

This report is a documentation of the workflow and the result of a project carried out by twostudents from the Royal Institute of Technology in collaboration with a company. The report isstructured in a chronological order and describes the methods and systems developed in theworkflow. The report shows how the project evolved from a study phase to the various proposals onthe concept solutions.The project aims to develop a systematic way of bonding two different kind of cardboard under fiveminutes. By conducting a general study about glue and its different forms it was possible to obtain abroad knowledge, which helped to choose the right substances to later use in testing on the differentcardboard materials in question. Glues's survey resulted in a list of different substances that wererelevant to the project.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

AbstractAbetong in Falkenberg manufactures, among other things, small prefabricated concrete buildings for housing various installations, such as electric transformers.The aim of this dissertation is to reduce the time needed to design such buildings, by way of finding a number of standardized buildings. Standardized in such a manner as to incorporate both the needs of the manufacturer (Abetong) and its customers.To analyze the needs of the parties the work has included a market survey and calculations on the strength of these buildings.One survey was a letter questionnaire to all of Abetong?s customers who have, in the past, ordered these types of building. The aim of the questionnaire was to establish how the customers want these buildings designed.Another survey conducted was an inventory of all of Abetong?s previous projects where these types of building were manufactured.

This thesis contains a usability evaluation of ?Barnplay?, a Swedish video-on-demand service targeted at children. The objective of the study was to identify usability issues in the video service and to develop measures on improving the user interface, with special focus on adaptation to the broad target group of 3-11 year olds.The study was conducted by first mapping established practices in designs of VOD-services targeted at children, followed by interviews and usability tests with children between 2-11 concerning their use of ?Barnplay?. Based on the initial data collection, a prototype was developed and then evaluated by usability testing and A/B-testing.The main conclusion of the study is the need of better individual adjustment of the video content selection to better appeal to different age segments within the target group.

Formulation and testing of a new type of chainsaw lubricantThe company Agro Oil has come up with the idea of developing an environmentally adapted chainsaw lubricant with a new unusual base fluid. A field test with a tree-harvester shows unsatisfactory low temperature properties and high wear. In this work the viscosity, price and pour point of different combinations of the given base fluid and three other base fluids have been investigated. Desired viscosity and price are determined for different formulations. The new lubricants tested show lower pour points than almost all products on the Swedish market.A test equipment has been developed to investigate the wear.

AimThe aim of the present study was to evaluate physical performance according to ?fysprofilen? in skiers of the Swedish mogul ski team and to compare their physical performance at three test occasions during one year.MethodsAll eight elite mogul skiers at the Swedish national mogul ski team during the seasons 2011/2012 and 2012/2013 participated voluntarily in this study. The test battery ?fysprofilen? was performed at three test occasions, October 2011, May 2012 and October 2012. Muscle strength was evaluated with squats, bench press and grip strength; power was evaluated with power clean, squat jump, countermovement jump with and without arm swing, Harre´s test and the 30 meters sprint.

Bakgrund: Det är viktigt att kliniskt kunna avgöra om idrottaren är tillräckligt rehabiliterad för att återgå till full träning och matchspel eftersom otillräcklig rehabilitering är den största riskfaktorn för återskada i hamstrings. Därför skulle ett test med enkel utrustning behöva komplettera den kliniska undersökningen.Syfte: Studiens syfte är att undersöka vilket samband som finns mellan genomförandet av Nordic hamstring strength test och Asklings hamstring test utifrån skattning av smärta och obehag i samband med testen. Huruvida deltagarnas tilltro till att prestera sitt yttersta i en 90 min fotbollsmatch påverkas efter testerna samt att beskriva obehag och smärta efter testerna för spelare som varit skadad eller inte under senaste sex månaderna.Metod: 22 fotbollsspelare fick skatta sin tilltro till sin egen förmåga att prestera sitt yttersta i en 90 min fotbollsmatch samt skatta obehag och smärta med VAS i samband med testerna. Hamstring Outcome Score användes för att få en helhetssyn av deltagarnas funktion och skadehistoria kring hamstring. Spearman?s rho och Wilcoxon?s teckenrang test användes för att analysera resultatet.Resultat: Korrelationen mellan Asklings hamstring test och Nordic hamstring strength test var moderat (0,4-0,6) dock signifikant på <0,05.

Bakgrund: Det är viktigt att kliniskt kunna avgöra om idrottaren är tillräckligt rehabiliterad för att återgå till full träning och matchspel eftersom otillräcklig rehabilitering är den största riskfaktorn för återskada i hamstrings. Därför skulle ett test med enkel utrustning behöva komplettera den kliniska undersökningen.Syfte: Studiens syfte är att undersöka vilket samband som finns mellan genomförandet av Nordic hamstring strength test och Asklings hamstring test utifrån skattning av smärta och obehag i samband med testen. Huruvida deltagarnas tilltro till att prestera sitt yttersta i en 90 min fotbollsmatch påverkas efter testerna samt att beskriva obehag och smärta efter testerna för spelare som varit skadad eller inte under senaste sex månaderna.Metod: 22 fotbollsspelare fick skatta sin tilltro till sin egen förmåga att prestera sitt yttersta i en 90 min fotbollsmatch samt skatta obehag och smärta med VAS i samband med testerna. Hamstring Outcome Score användes för att få en helhetssyn av deltagarnas funktion och skadehistoria kring hamstring. Spearman?s rho och Wilcoxon?s teckenrang test användes för att analysera resultatet.Resultat: Korrelationen mellan Asklings hamstring test och Nordic hamstring strength test var moderat (0,4-0,6) dock signifikant på <0,05.