Every year, pesticides are found in surface and ground waters in Sweden. Fungicides are in common usage and applied in high amounts against potato late blight. The present thesis examined the possible removal of four fungicides (metalaxyl, cyprodinil, propamocarb and mandipropamid) from water using the microalgae Chlorella vulgaris. Microorganisms are capable of decomposing a range of organic pollutants and the main focus in previously published studies has been on bacteria and fungi. Microalgae are mostly studied due to their high capacity in biosorbing heavy metals.

The aim of this Master?s thesis is to investigate what kinds of writing activities that are offered to children and young people in Sweden and if, how and why libraries are involved with them. The issues illuminated in this thesis are how children and youth can be motivated and advance in their writing, what the purpose of writing activities can be, and if writing activities can be suitable as a part of the work in libraries. The theory is based on a study with writing youth made by Catharina Nyström. In order to study the issues six interviews have been completed with persons who all have played a part in writing activities for children and youth.

The purpose of this study was to investigate the presence of arterial insufficiency in patients undergoing CABG surgery and whether arterial insufficiency is a risk factor for postoperative wound infections in the harvesting leg. Patients who had CABG surgery were enrolled consecutively. A total of 144 patients participated in the study. During their hospital stay demographic data was recorded, as well as pre-, intra-, and postoperative tests and risk factors. The patients answered a questionnaire regarding postoperative wound infections 30 days after surgery patients answered a questionnaire regarding infections.

This thesis is made by Carl Persson and Alejandro Saavedra for Gryaab. Gryaab is Gothenburg?s water processing plant and produces about 60 GWh biogas annually with a flow around 1150 Nm3/h. Gryaab wants to research their possibilities to become independent with electrical energy and the possibilities to enrich, upgrade biogas. The use of methane rich gases like biogas and natural gas is today low in Sweden compared to major parts of the world.

The starting point for this thesis has been the great process of change that Swedish municipalities now arefacing due to the political directive of offering full-time employment to all part-time employees. The aimof the research is to create a decision support model for Swedish municipalities, which simultaneouslyintroduce the offer of full-time employment and an internal personnel pool. The factors that mayinfluence the personnel?s choice of employment level and the quality of the outcome, thus the financial result,are we also aiming at explaining. The empirical observations were found through secondary data as well asobservations from the municipality of Göteborgs Stad.

The present study deals with the usage of the school library for upper secondary school students. Is it a place for working or studying? The questions are:? What do the students say they use their school library for?? Are there any differences between students in theoretical programs and students in practical programs with regard to their use of the school library?? What are the features of the ideal library from a students? point of view? My study represents a user?s perspective. The investigation is both quantitative and qualitative. Eighty-two inquiries from four different classes, representing two theoretical and two practical programs were carried out.

Considering that the price and demand for energy gradually has risen over the past decade and a wider discussion about the human impact on the environment has become increasingly more important and given a clearer role in modern society. This has contributed to increased incentives to reduce the use of fossil fuels and increase the use of renewable energy.The agriculture currently accounts for 20 % of Sweden's total greenhouse gas emissions. A way for an agricultural company like Wapnö AB to reduce their emissions could be to utilize existing renewable energy sources within their own premises.The report's aim is to create an energy audit of Wapnö?s existing energy system and how it changes with a future biogas plant in operation. The energy audit is used to illustrate how the company?s climate footprint could change.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

This report of 10 credits is a C ? level essay in informatics.The report presents the result of our investigation. The purpose is to answer our problem statements:?How does computer-based graphical pedagogical tools work compared to traditional teaching aids? What is the users view upon the content? Is the information too hard or too easy? Does the structure work better than the traditional website design??Infact is a system that has as its primary goal to present information in a pedagogical way to let users of all ages and sexes learn from the contents. The information shown on the web page www.forskning.se is about Swedish and international research and the sites primary target users are high school students.In our investigation we asked a total of sixteen students divided into three groups a number of questions where after we started a discussion that we hoped would yield some answers about Infact and the homepage in general.Our main conclusion is that Infact is a good tool to use side by side with the textbooks and the traditional teaching aids.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

ABSTRACTIntroduction: Preoperative hand disinfection aims to prevent surgical site infections. After the preparing hand wash, drying is performed using an aseptic technique. It?s important to dry hands thoroughly in order to achieve the full effect of the alcohol based hand disinfection. Due to the lack of a evidence-based guideline on this procedure, the hand drying techniques differ among operating theatre nurses, depending on which technique seen as the most appropriate.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.