The Swedish potential of electricity production from roof mounted solar panels has been determined in three steps: accessing the existing roof top areas, simulating the amount of electricity solar panels can produce on these areas and finally analyzing how large the necessary economical change is to make the solar cells profitable.The total existing amount of roof top areas are 319 square kilometers and the area distribution follows the distribution of people. This leads to an installed power of 47,9 GW which are expected to produce 49,0 TWh electricity per year. If the quality of the electricity is prioritized the highest the power is reduced to 3,7 GW, generating 3,8 TWh yearly, but if the hosting capacity is calculated from Sweden?s total electricity need, the capacity is 42 TWh per year.Today, solar panels are not profitable in Sweden for houses, even though there is a subsidy of 35 % of the investment costs, discounted in 25 years. The profitability is calculated with a cost of capital of 5 %, a price on electricity of 1 SEK/kWh and an investment cost of 20 SEK/Wp.

This thesis investigates the socio- and environmental economic effects of a deep repository for spent nuclear fuel in Forsmark in the municipality of Östhammar. I seek to show the general picture but focus on the effects on employment, environment and income. Cost-benefit analysis is used to investigate the differences in utility between a scenario with and a scenario without a deep repository in Forsmark. Most of the possible effects can not be valued and many can not even be quantified with the data available today. Therefore this thesis has a bit of a ?preliminary study character? and seeks to show what we know today and what needs to be further investigated when available data allow it. The costs that could be valued are noise from the traffic during the period of building and emissions of carbon dioxide and nitrogen oxides from the transportation of rock masses during the building period.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

The purpose with this essay is to study how a micro enterprise builds a brand. This because the current situation makes it difficult to stand out from the vast amount of marketing messages available in the market without having an extensive marketing campaign. Small companies do not have the opportunity to put a lot of recourses as money into marketing as the large companies do. Neither do they afford to repair a brand failure.Brand building is a process that constantly is in progress in a company, large or small. To make this process concrete we have chosen to study the four factors; brand awareness, perceived quality, brand associations and brand loyalty.

Introduction: Every year about 450 women in Sweden are diagnosed with cervical cancer, almost 200 die and thousands undergo surgery because of cell changes in the cervix. A HPV infection can lead to cervical cancer and therefor costs for the society. The implementation of a vaccination program against HPV is a way to avoid these costs. Aim: The study aimed to calculate the economic impact of the HPV- vaccination program for children in Sweden through a cost-benefit analysis. Method: In this analysis, status quo was compared with non-administration of the HPV-vaccine for the selected cohort of ten-years-old girls in Sweden.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas emissions in the atmosphere. Reducing costs will also help maintain business competitiveness.Scania in Södertälje is a company where the optimization of energy use is an ongoing and continual process. One area with potential to make energy and cost savings is the effectiveness of the ventilation systems in offices and industrial premises at Scania. During the summer months an increased demand for cooling occurs, leading to increased ventilation and a peak in district cooling system usage. Sorptive cooling is a technology where the supplied air is cooled by applying external heat.

Alfa Laval?s strategy is to focus on modularized product platforms. Several benefits areforeseen, reduced lead-time, less costs, shorter Time To Market and better quality.Development and verifying will be carried out on block level. Today the separators arebeing tested as a complete unit. A number of factors affect the test results and problemsthat are encountered can be hard to identify.

Title: The component approach - From the harmonization process as a background to the perception of benefits and costs as effects.Authors: Elin Börjesson & Emma KarlssonTutor: Titti EliassonKey concept: Harmonization, Component approach and Benefit/CostBackground: With IFRS for SME's as a basis, the Accounting Board developed K3 which shall apply from financial year 2014. Upon introduction of the K3 companies will be forced to apply the component approach. When K3 with the associated component approach went out for consultation it resulted in a debate where some actors opposed the imposition of a requirement and not an option. It was questioned whether the costs with the component approach would be greater than the benefit of the implementation.Formulation of the problem: How is the introduction and use of the component approach seen by different operators from a benefit-, cost perspective?Aim: The aim of this essay is find out how the introduction and use of the component approach is seen by different operators from a benefit-, cost perspective.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Mechanization of Swedish agriculture started in the beginning of the twentieth century, to be able to have more animals without raising the number of employers. The horse business has not by far kept up with these cost savings solutions. Cleaning out stables and feeding horses are the most time-consuming tasks in horse stables today. The most common way to clean out the stable is still by shovel and wheelbarrow. The clean out process can easily be mechanized through semi- permanently beds with movable walls between the boxes so that the litter can be removed by a tractor or a loader.

The purpose of this thesis is to describe property definition and special boundary demarcation and to analyze the differences between the two cadastral procedures. Property boundaries, especially unlawfully determined boundaries created through unofficial parcelling, can create conflicts between landowners and make it diffi-cult to know which land that a property contains of. It is possible to clarify the boundary conditions through a property definition or through a special boundary demarcation re-establish boundary marks.The methods used are: (1) A literature review to collect background information, (2) A case study to summarize court cases and (3) A questionnaire study to collect opinions from cadastral surveyors.The result is summarized in two comparisons. Firstly between restoration of landmark and special boundary demarcation (which replaced restoration of landmark in a legislative change in 2010), which demonstrated that the change in the law is considered positive because special boundary demarcation gives a legal effect on the boundaries. Secondly between property definition and special boundary demarcation which demonstrated that the two procedures are similar to each other.