Music production software has a strong tradition of two-dimensional graphical user interface (GUI), in which the time line is represented as a flat composition either horizontally (from left to right) or vertically (from top to bottom). In my degree work titled Sequi, I approach music composition from a different angle. Instead of a two-dimensional time line with only two possibly ways of progression (forward or backward) I constructed a three-dimensional GUI with the maximum of four different ways of progression from any given point in a composition. The height axis is used to describe time-intervals (the time between downbeats) and the wide and depth axes are used to describe progression from one sound to another..

In 2014, the Swedish leisure-time centres after school became widely criticized on several occasions by school authorities. The cause for its criticism was a reflection of leisure time-centres with lots of untrained staff and a lack of pedagogical aspirations. The conclusion of the criticism was that these leisure-time centres do not fulfil their potential. However, these assessments has only to a limited extent become a part of the public educational discourse in Sweden. This discourse has mainly focused on the decreasing results in the Swedish school, which has caught the attention in the media and ended up on the political agenda.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

Sudoku solvers are a widely researched topic among mathematicians and computer scientists. This report investigates the differences in execution time and time complexity between backtracking and human strategies for classes with 17-21 clues. Backtracking is compared to our implementation of human strategies with test data that contains 99 Sudoku puzzles for each class. The study shows that the execution time and time complexity is improved for human strategies compared to backtracking for each class. The conclusion shows that it is always favorable to implement the human strategies investigated in the report. .

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).

Master thesis for Mechanical engineering, at the University of Lund. Incorporated in project Pondora.The purpose of this master thesis is to compare the existing one way packaging system with a proposed return crate system not yet available in Sweden. The comparison is focused on packaging handling in the grocery store.The purpose is also to investigate how operating return crate systems in Norway and Finland function, identify, the problems they have encountered and survey economic and technical aspects. The knowledge we hereby have acquired was subjectively evaluated in the thesis.The Swedish survey has a focus on meat and bread. The surveys in Finland and Norway contain all the products utilizing the studied return crate systems.We have surveyed how the handling of transport packages for meat & provision and bread is done in the store.

Titel in original language: Ett Temporärt Magasin : Fallstudie av Västra Götalandsregionenscentralmagsin i VänersborgLanguage of text: SwedishNumber of pages: 37Keywords: conservation, preventive conservation, public art, temporary storageISSN 1101-.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

The purpose of this Masters thesis is to investigate the reasons for public libraries to have story-time today and also the reasons for story-time at the public library historically in Sweden. Why is the phenomenon of story-time still existing at public libraries today? The study is based on a questionnaire that was sent to childrens librarians in the Västra Götaland region. The material collected in this questionnaire was put together and resulted in six different categories showing the libraries purposes and thoughts of their story-time activities. The categories were: cultural heritage/tradition, joy of reading, language and imagination, library visits, storytelling and mutual experience.

To curb greenhouse gases and mitigate climate change is one of the biggest challenges human society face today. Carbon dioxide (CO2) has accumulated rapidly in the atmosphere as a consequence of burning of fossil fuels and deforestation. The aim of this study is to explore two methods to store carbon dioxide in geological formations and biological sinks. The aim is also to discuss the two mitigation options from a sustainable perspective and whether it can lead to a better environment and benefits for local and global societies. The research questions are: Which method to store carbon dioxide, geological or biological, is the most effective? Which method to store carbon dioxide, geological or biological, has the greatest potential to promote sustainable development for local communities?The method used is a comparative case study and presents four case studies that explore the potential for CO2 storage offshore in Norway and Brazil; and in tropical forests in Mexico and Brazil.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

AbstractWe have been honored to work with a company called Frimeko AB. Frimeko is located in Halmstad where they make and sell furniture for school and office environment. Our task is to construct a new, more modern sewing machine table for schools. The task is to use the same function as before, ease the storage and production of sewing machine.Efforts to develop the new sewing machine table resulted in that we came up with an innovative design that the company is pleased with.During this project the group has used the method from ?Fredy Olsson Konstruktion? .

Time studies in dairy production are an essential tool when deciding about level of mechanisation and automatisation both in investment situation and improving efficiency in existing operations. In previous investigations such studies have been carried out during normal barn conditions during winter. Since there is a compulsory to have dairy cows grazing 3 to 5 months during summer time in Sweden time studies during this season is important to have a full picture of needed working time. During grazing season time studies was carried out at 14 dairy farms representing herd sizes from 66 to 450 dairy cows of which 6 farms with AMS. 8 farms were the same as studied during winter season.