The aim with the thesis is to get deeper knowledge in one of the subjects botany, livestock technology or economy. I have chosen to get deeper knowledge in how to store potatoes. How are you going to act to keep the quality on the potato during the storage, with a minimum of weight lost? My aim with this thesis is to get a view over how the potato act in storage space. The storage environment is very important in the storage space.

In today?s society there is an increasing demand for renewable energy sources such as sun and wind power. These sources are intermittent, and energy storage is therefore needed to ensure a constant power supply. This report compares pumped hydro energy storage (PHES), compressed air energy storage (CAES), flywheels, batteries, super magnetic energy storage (SMES) and hydrogen energy storage.The opportunities for further development are limited for PHES and CAES in comparison with the other technologies. Lithium-ion batteries and hydrogen energy storage are considered to have the most potential in the future.

This thesis work aims to describe the prerequisites for a distributed treatment platform for real-time sharing of rounds performed by paediatric oncologists. The work started during the autumn 2004 and is directly aimed at improving the situation for the thirty or so specialist treating children with cancer. The work is not limited to the description of such a platform but also to select suitable software and hardware for the implementation of the platform and further more to coordinate the implementation. The production of several documents describing the platform is also part of this work. The work successfully led to the implementation of such a platform as described in the published article Barnradioterapi på distans Kristenssen et.

This report describes the manufacture and control of a flying platform. The report describes the basic and fundamental theories required to get the platform flying. It touches on subjects such as A/D-conversion. PWM-control and PID-control. The sensors used in the platform are a gyro and an accelerometer.

Dagens moderna organisationer driver vanligtvis en kostsam IT-baserad infrastruktur. De besitter högpresterande funktionalitet och säkerhet för att garantera att de dagliga operationerna fortskrider. Mjukvarubaserade lagringsplattformar är ett alternativ som kan användas för att reducera dessa kostnader. Genom att efterlikna avancerad teknik som redan existerar i traditionella lagringsplattformar kan detta implementeras som mjukvara på commodity hardware i syfte att uppnå samma funktionalitet. Ceph är ett alternativ som numera implementeras och ämnar erbjuda detta val.

This report describes the manufacture and control of a flying platform. The report describes the basic and fundamental theories required to get the platform flying. It touches on subjects such as A/D-conversion. PWM-control and PID-control. The sensors used in the platform are a gyro and an accelerometer.

Title: Information storage - A growing problem? Authors: Göran Svanhall Pär Truedsson Erik Ponnert Tutor: Bengt Carlsson Problem: Every day companies, regardless of size, produces new information that needs to be stored. In the information society of today, the characteristics of the information changes both in size and complexity. This results in higher demands on which storage solution that suits the company and their field of business. New and more innovating storage solutions enters the market, but are they necessary to smaller companies of development active in the IT society? Questions to Answer: Is data storage a growing problem for companies of development active in the IT society? How do traditional storage solutions manage the information growth of today? How urgent is the need of a new storage solution? Which features are prioritized in the future storage solution? Method: By performing a quantitative survey we delivered an inquiry to several companies, which answers will help us answering our above mentioned questions.

The purpose with this work that is the basis for this thesis was to help Nattavaara Economical association to develop a program for handling invoices, customer information, and storage. The program and this thesis have been done in cooperation with the economical association in Nattavaara. Some of the demands on the program are that it shall handle customer information, storage status, invoices and diesel consumption. The program must be able to printout invoices, reminders, delivery notes, a customer list and a storage list. All information will be stored in a database.

Texo Application has created robots that they call for satellites; with these you can feed in storage pallets into a satellite storage. Satellite storages consist of channels in height (e.g.3 to 8 pieces) and width (e.g.3 to 100 pieces). Channels can be different long (e.g. 5 to 200 pallets). At deposit of a storage pallet the truck insert the satellite in a channel and then the pallet, the pallet is driven into the channel until it reaches another pallet or the other end.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

Title: Information storage - A growing problem? Authors: Göran Svanhall Pär Truedsson Erik Ponnert Tutor: Bengt Carlsson Problem: Every day companies, regardless of size, produces new information that needs to be stored. In the information society of today, the characteristics of the information changes both in size and complexity. This results in higher demands on which storage solution that suits the company and their field of business. New and more innovating storage solutions enters the market, but are they necessary to smaller companies of development active in the IT society? Questions to Answer: Is data storage a growing problem for companies of development active in the IT society? How do traditional storage solutions manage the information growth of today? How urgent is the need of a new storage solution? Which features are prioritized in the future storage solution? Method: By performing a quantitative survey we delivered an inquiry to several companies, which answers will help us answering our above mentioned questions. Conclusion: The consulted companies experience no growing problems what so ever regarding their existing storage solution..

This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

Allt eftersom webben utvecklas kommer det nya tekniker och verktyg att lära sig för webbutvecklare. WebStorage är en av dessa. Som en del av HTML5 har den många användbara funktioner som öppnar upp nyamöjligheter för utvecklare och för vad webben kan användas till. Som plattform har en hemsida som gåttunder projektnamnet Partify använts och här har Web Storage testas att användas för att undersöka hurman bäst använder tekniken. Rapporten innehåller ingående fakta om hur Web Storage är uppbyggt ochhur man använder det.Efter jämförelse med dagens vanliga teknik, cookies, finns tydliga resultat på hur väl Web Storage hävdarsig när det gäller säkerhet, prestanda, användarvänlighet och funktionalitet.

Manne Bouveng, CEO of Optimel AB had an idea for a new kind of storage cabinet that could be adapted especially for townhouse owners. I came in contact with Manne by a familiar friend for us; we met and decided that it would suit as my thesis.What was needed to be done was a market research that would possibly show that there was a need for a new kind of storage cabinet on the market. Because of this we continued to work on the basic idea. We came up with a solution where we developed a box that resembles Optimels known mailbox Biggi Rondo, the storage cabinet is a new solution of a storage cabinet, adapted after a market that need of a lot of new space. The solution is based on a simple construction which sits an inside hang-off device which can attach tool hooks, tool holders and shelves and so on.The purpose of the assignment was to develop a new type of storage cabinet with some kind of solution to attach tools and other garden related stuff. With this we have succeeded and the concept meets the requirements we set ourselves at the beginning of the project..