Detta kandidatarbete undersöker hur en karaktärs fantasi kan gestaltas med genren magisk realism inom animerad film. Under arbetets gång har vi undersökt olika filmer med magisk realism som genre, så som Pan?s Labyrinth, Ally McBeal och Six Feet Under och The Science of Sleep. I detta arbete presenterar vi de metoder vi valt för att skapa en animerad film med genren magisk realism.

Projektbeskrivning: Bakgrund: Vid valsning av tunna band med hög hållfasthet används reversibla mångvalsarsverk. Kundkraven är höga vad gäller bandens planhet. Planheten kan styras genom de planhetsställdon som valsverket är utrustat med. Syfte: Förvärva kunskap om hur de olika ställdonen inverkar på planheten. Varje enskilt ställdons inverkan på planheten kan undersökas genom att genomföra en föreskriven förändring av ställdonets läge och därefter utvärdera planhetsförändringen som uppkom.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

En studie i hur lekar kan inspirera till digitalt gameplay och samtidigt förmedla lekarnas kultur till spelaren. Detta har testats genom att göra ett prototypspel där varje bana är baserad på en leks mekaniker eller mening. Spelaren måste själv i slutändan analysera banan med en beskrivning av leken som sin enda ledtråd. Detta för att om spelaren själv blir engagerad och ska minnas vad den gjort kommer spelaren på så sätt minnas kulturen det medförde..

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser scanning.This thesis contains a comparison between the methods terrestrial laser scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Detta är slutreflektionen över ett kandidatarbete gjort av Karl Tannergård och Per Thulin. Arbetet har gått ut på att skapa en prototyp av en barnspel baserat på Inger och Lasse Sandbergs böcker om Lilla Spöket Laban och hans familj. Spelet är tvådimensionellt och vänder sig till barn i åldern fyra till sju år. Det är skrivet i programmeringsspråket Python och använder multimediabiblioteket pygame. Utvecklingen har skett i samarbete med animationsstudion PennFilm AB..

Detta examensarbete är utfört på Sandvik Materials Technology (SMT) i Sandviken. SMT har under ett antal år arbetat mot att infria deras två största kunders, Atlas Copco Secoroc och Sandvik Mining and Construction, önskemål om en leveransprecision på 95% och en ledtid på tre dagar för storvolymprodukter av bergborrstål. Idag är leveransprecisionen tillfredsställande medan ledtiden är fem dagar. Examensarbetets syfte är att analysera vad som krävs för att infria Atlas Copco Secoroc's och Sandvik Mining and Constructions önskemål om tre dagars ledtid för storvolymprodukter. Ledtidsreduceringen ska åstadkommas med nuvarande skiftform och utan att leveransprecisionen påverkas i negativ riktning.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.

The present study examines a new production line of glue-laminated wood (glulam). The glulam is produced from non-planed boards of spruce, which also is convex, that is pressed together with high pressure during the gluing. According to a economic calculation, the material has a economical potential mainly on account of the absent planning. The study mainly found out that the shear strength of the material tolerated the demanded values in standard SS-EN 386, but the delaminating values did not. Since there are more areas to be studied around the material, the prospect to achieve the right delamination values is seen as positive..

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

Projektbeskrivning: Bakgrund: Vid valsning av tunna band med hög hållfasthet används reversibla mångvalsarsverk. Kundkraven är höga vad gäller bandens planhet. Planheten kan styras genom de planhetsställdon som valsverket är utrustat med. Syfte: Förvärva kunskap om hur de olika ställdonen inverkar på planheten. Varje enskilt ställdons inverkan på planheten kan undersökas genom att genomföra en föreskriven förändring av ställdonets läge och därefter utvärdera planhetsförändringen som uppkom.

Title: Music video: Twelvestep ? DownInside Made by: Benjamin Bondesson Christian Edgren Tutor: Silvio Ocasic Course admin: Peter Ekdahl Purpose: To create a music video that we can stand, that challenges us in the creative process. And to help a struggling band with another medium to spread their music. Goal:We intend to create a great product that is demanding and educational to us. Especially when it comes to cooperation and editing/post production. Keywords:Music video, digital video, film.