Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

This thesis is based on the implementation of a bilateral rural development program in Burkina Faso. The main purpose of this study was to put the actual implementation process of a bilateral development program in view. This was done by investigating how two dominant perspectives in the implementation literature can explain what in fact happens during the realization of an aid program. A further aim of the thesis was to explore the limitations of these two dominant theories, in order to get a full understanding of the complexity of the realization of an aid program. Based on the implementation theory, this study shows that the realization of an aid program can be understood from three different angles.

This Master?s thesis is one of two parts of a combined project called Sustainable development around the Lake Victoria, the purpose of which is to investigate the importance of local anchoring and active participation in the work towards sustainable development. The present study aims to investigate whether men and women are empowered by the participatory rural appraisal (PRA) process promoted in their villages by the VI Agroforestry Project Masaka/Rakai. The study is primarily based on interviews with farmers within the project area and brings up a local perspective on the concepts sustainable development, active participation and empowerment. The study shows that to improve the farmers? livelihood and to create a sustainable development in the community, the farmers have to be actively involved in, and in control of, the process.

The purpose of this thesis was to look at the relationship between the experiences of work related stress among male bank employees and how they dealt with potential stress. The thesis focused on male bank employee?s experiences and management of work related stress with the control requirements and support model as a starting point. Work related stress is a phenomenon that has become a serious problem with economic impact for both the individual and organizations. Increased absence from work due to medical issues is one example of such consequences.

Foot rot is a severe claw disease which occurs among sheep and goats in most parts of the world, with outbreaks in hot and humid weather. It is a contagious bacterial infection caused by Dichelobacter nodosus in association with Fusobacterium necrophorum. Foot rot has a negative impact on both animal welfare and economy.This thesis presents how Australia, Nepal, Norway, Switzerland, Great Britain, Sweden and Uruguay handle foot rot. In the selection of countries the focus was on countries that have control- or eradication programs against foot rot. There are differences in the climate, animal husbandry practices, animal welfare and economic resources in the countries that are presented.

The accounting scandals that have attracted attention in recent years have led to internal control becoming a more central part of business activity. Doubts about what firms actually do have increased, all caused by the attention of accounting scandals. To counter this, frameworks and laws evolved and gained a significant role in the organization and its surroundings. The aim of the present study is to find out how four companies in the Kristianstad region are working to ensure its internal control and how they work to minimize risk and reduce uncertainty. We have used a qualitative method and interviewed a person in a senior position in each company.

The environmental requirements and laws on combustion engine emissions are very tough today andthey will become even more stringent in the future. To achieve these requirements there are highdemands on the control systems for these engines. An improved precision in the measurement of anengine's speed and position gives the electronic control system an even better timing when it comes tofuel injection and ignition. This makes the engine more fuel efficient, reducing the emissions. This thesisis part of a collaborative project between Hoerbiger Control Systems and subsidiaries.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

Bakgrund: Traditionell styrning har kritiserats av en rad olika författare och en modern verksamhetsstyrning har utvecklats. Vi menar att traditionella tillverkande företag är intressanta ur den aspekten att traditionella ekonomistyrningsmodeller är uppbyggda kring dessa typer av företag. Frågan vi ställer oss är alltså huruvida modern verksamhetsstyrning är ändamålsenlig i traditionella tillverkande företag.Syfte och metod: Syftet med den här uppsatsen är, att beskriva och analysera tillämpningen av traditionella och modernare verksamhetsstyrningsmetoder i traditionella, tillverkande företag. Vår empiri är baserad på sex olika kvalitativa intervjuer på företagen Cloetta Fazer, Milko och Skånemejerier.Resultat: Traditionellt tillverkande företag möter inte samma förutsättningar som tidigare och behöver därför på många plan anpassa sin styrning..

This is a case study of the music channel MTV and it?s impact on the Swedish mediascape. We want to look into the process that lies behind this huge intercontinental corporation. Through literature studies we present the mechanism?s that paved the way for MTV growing into the number one music channel of modern time.

When protection zones for wells are delineated, it is important to acquire good knowledge about possible travel time from different points in the catchment area to the well. Often, simple analytical methods are used for estimating travel times and the assumption is made that the hydraulic conductivity is relatively homogenous within the aquifer. Nevertheless, many aquifers are strongly heterogeneous which may lead to differences between estimates and actual travel times. As a part of the process to develop improved methods for delineating protection zones for groundwater supply wells, a tracer experiment was performed in a glaciofluvial esker formation in Järlåsa. On the basis of the experiment, a numerical flow model was created for the test site.The purpose of this master?s thesis was to apply the flow model to an aquifer where the hydraulic conductivity shows great variability and should be described by a stochastic distribution.

The purpose of this paper is to describe methods to computerize a library and to compare theory with a process in a school library. The case study is based on a school library called Sunnerbogymnasiet which is situated in Ljungby. My questions are;- Which methods are parts of the process to computerize a library?- Which methods are used in the process in Sunnerbogymnasiet?- What does the practical process look like compared to the methods described in theory?In the paper I present the methods in the process according to the studied literature and compare these with a process at Sunnerbogymnasiet. The most significant result is that cooperation between the school library and the community library was the most important reason for the choice of library computer system.

This project is part of the course MF10YX, introductory mechatronics. The purpose of theproject is to integrate modules from the group members previous specializations into amechatronic system in the form of a self-balancing robot. The prototype ?Charlie? should be ableto race along a 10 - 30 m line. It should be able to start manually and autonomously detect andstop after the finishing line.

Arbetstillfredsställelse är ett viktigt begrepp då människor tillbringar stor del av sitt liv på arbetsplatsen. Det är ett svårdefinierat och komplext begrepp, men kan ses som en individs syn på och värdering av sitt arbete och sin arbetsplats. Locke (1976) ser det som tillstånd och upplevelser och Kaufmann och Kaufmann (2005) som ett samspel mellan bland annat den anställdes tankar, förväntningar och själva arbetet. Det finns aspekter som kan kopplas till hur tillfreds en medarbetare är med sitt arbete och sin arbetsplats. I följande studie belyses förhållandet mellan Work Locus of Control och arbetstillfredsställelse samt anställningslängd och arbetstillfredsställelse.

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.