This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

SAMMANDRAGDenna rapport är en del i ett examensarbete på byggingenjörsutbildningen vid Chalmers Tekniska Högskola. Som komplement till rapporten finns ritningar på idéförslag samt ett program som beskriver byggnadens nutida utformning samt kraven på en ombyggnad.I denna rapport utreder vi möjligheterna att bygga om den befintliga järnvägsstationen i Mellerud till ett modernt resecentrum, på uppdrag av Melleruds kommun. Rapporten behandlar flera olika grundläggande lösningarav utformningen. Med dessa som utgångspunkt utformas sedan de olika delarna i den bästa av de grundläggande lösningarna. Målet med rapporten är att utforma ett resecentrum som tillgodoser resenärernas behov.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

The purpose of the work is to analyze and balance an assembly line at Fläkt Woods in Jönköping. The work is going to answer the questions about today?s throughput time, how much waste that occurs, number of staff at the assembly line, how the supply of material works and possible improvements that can be made at the work stations. The work is also going to give a proposal of improve-ments that can be made.The methods used to get the result include observations and measurements, con-versations with technicians and operators and also data from Fläkt Woods? data-base.Large variations in throughput time are measured during the measure period, from 3 hours up to 5 hours and 35 minutes.

Syfte och frågeställningarSyftet är att ta reda på om en utökad undervisning i idrott och hälsa har ett samband på skolelevers motoriska färdigheter. Detta syfte kommer vi undersöka genom att besvara frågorna ?hur ser de motoriska färdigheterna ut hos eleverna i en Bunkefloskola jämfört med i SIH-projektet?? och ?finns det något/några områden inom de motoriska färdigheterna där skillnaderna är särskilt utmärkande??MetodDatainsamlingen bestod av två stycken observationstillfällen där vi observerade 60 elever, från en Bunkefloskola i Sverige. Eleverna uförde NyTidstestet som syftar till att testa deras allsidiga rörelsekompetens. Skolan som eleverna går på arbetar med Bunkeflomodellen som karaktäriseras av att ha fysisk aktivitet på schemat varje skoldag.

A totally mixed ration (TMR) is a mixture of all the necessary feed components for the cow. She will eat the exact same feed in every bite which will make the rumen pH more stable and always supply her with a constant proportion between roughage and concentrate. This will make it possible for the cow to eat more dry matter (DM) a day because the fibre requirements are fulfilled. If a part of the concentrate is given separated from the mixture it is called partly mixed rations (PMR) and is almost always used when using an automatic milking system (AMS). When using TMR and PMR it is important to have a high hygiene, be accurate when mixing the feed and to look after cows in a good and strict way. The aim of this study was to document different farms with PMR in an AMS to see which routines they have and how they are managing their production.

På Scania väntar stora utmaningar i framtiden. Ständigt ökande konkurrens kräver ständiga förbättringar av produktion och produktionsstruktur. På Chassimonteringen i Södertälje monteras lastbilar samman. Detta examensarbete har utförts på en avdelning på Chassimonteringen där lastbilshytterna förbereds för att monteras på lastbilschassit. På denna avdelning, Hyttförmonteringen eller helt enkelt Förmonteringen, finns stora möjligheter till förbättringar.

The ongoing construction of Kristianstad is a trade mall in the city center, the City Hall and the railway station neighborhood is rebuilding, new residential projects are planned and "The healthy garden", "Accessibility for everyone" and "ERA-farms" are also current. Kristianstad has always a sustainable way of thinking in the background during the development and they are trying to meet all three perspective of sustainability: economical, ecological and social. The municipality seeks knowledge both by sharing their own and takes part in other municipalities in the development process..

Rapporten beskriver ett utredningsuppdrag för Lantmännen Unibake, Korvbrödsbagarn, där lösningar för en automatiserad iläggning av påsar i kartonger skall ersätta den nuvarande manuella hanteringen.Metoden för att hitta en passande lösning genomfördes enligt PDCA-cykeln (Plan-Do-Check-Act), där fyra olika faser går igenom för att få en förståelse för nuläget och önskemål, utforska tillgängliga alternativ genom kontakt med agenter för maskinföretag, utvärdering av lösningsförslag och till sist en slutsats och förslag till fortsatt arbete..

Detection of leukocytes in semen from boars is part of the routine control of semen quality. Leukocytes in semen can cause damage to spermatozoa that leads to impaired fertilization. In the artificial insemination (AI) industry there are standard routines for the quality control of the boars and of the neat semen before use. Since 2001, Quality Genetics has not done the leukocyte examination on semen samples from boars which are used for the production of pigs for slaughter. The purpose of this study was to investigate the occurrence of leukocytes in semen from AI-boars. The questions addressed were whether there are boars that have leukocytes in their semen and how frequently it occurs and, moreover, if there are differences between breeds, or even between individuals whose semen was checked before use in AI-dose production compared to those which were not. The study included a total of 135 AI-boars, of which 67 were Hampshire, 35 Yorkshire and 33 Landrace, all belonging to Quality Genetics AI-station in HÃ¥llsta.

Foder utgör grunden för att säkerställa djurens välmående och hälsa och för att de ska kunna prestera vad vi som djurägare förväntar oss av våra djur oavsett om de är produktionsdjur (till exempel hästar) eller sällskapsdjur. Foderlagstiftningen är ett viktigt område och i detta arbete ligger fokus på EU:s nya märkningsförordning som trädde i kraft i september 2010 (Förordning (EG) 767/2009). Denna förordning jämförs med tidigare regelverk och de förändringar som förordningen innebär lyfts fram. En del i märkningsförordningen berör hälsopåståenden, vilket inte är tillåtet enligt regelverket. Detta arbete innefattar därför en egen studie där en inventering av eventuella hälsopåståenden på ett urval av foderförpackningar tillgängliga på marknaden genomfördes.

Wind power is one of the sources of renewable energy which has to be developed further in order to lessen our dependence on non renewable sources of energy. It's mainly oil and coal which have to be replaced by green energy. Wind power is already established in many countries, for example Germany, The United States of America and Denmark but it has to be continually developed and expanded to meet the needs of the growing energy consumption in the world. During the last few years many types of small wind turbines have appeared on the market. These small wind turbines are an alternative to the big wind turbines or power generators which demand huge sums of investment money.A new target group can now buy the small wind turbines in order to cover their own usage of electricity.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

In this essay a proposal of city renewal is made for the new train station area built on highly productive agricultural land in Landskrona. The proposal is based on how the situation for the agricultural land in terms of exploitation looks like today and also on theories of urban governance to find out why the area turned out the way it did..

This report was written in an attempt to summarize old and new theories and scientific results regarding FORL (Feline Odontoclastic Resorptive Lesions). Several different kinds of treatment are presented in this study. Among them teeth extraction and crown amputation seems to give the best long-term results. It seems clear that the domestic cat of today have no trouble digesting dry foods without their teeth. The most accurate way to diagnose FORL is by using intraoral dental radiology technique.