The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The BSC is a widely used management tool that is turning the vision and strategy into operational goals. However, after analyzing the criticism received by the BSC, it seems as if its internal focus, rigidity, static-ism and mechanical mindset limits the company?s ability to create a strategy that takes important external factors into account. As we see it, the BSC?s limitations can create a risk for strategic inertia.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

This examination paper is the account for the author?s work while arranging and registrating the business archives and business records of the Herman Bergman?s Foundry in Stockholm, Sweden. It is part of the one year Masters program in Archival Science at the University of Uppsala. The records are from the beginning of the 1900s to the 1970s. Most of the business archives are from he 1940s to the 1950s.

In this project I have worked with porcelain och and porcelain decors. The project was based on questions like why porcelain is such a richly decorated product and how you can maka a shape and a decor feel like a entirety. In December 2009 I went to China in search for answers and to study porcelain decors. This trip has been my inspiration throughout the whole project and also the main theme for the idea, the shape and the decor. That is why I decided to make a teacup with a plate that also has a function as a lid.As I first started working with the shape I was thinking to make a rounded teacup, inspired by the chinese rice bowls, but since I had to produce the porcelain by myself I decided to make a much more simple shape.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

The occurrence and degree of osteochondrosis was studied in 64 pigs raised in conventional systems (45) or organically according to KRAVs principles (19). In this blind study the growth plates of distal radius and ulna were examined macroscopically and radiologically searching for pathological lesions. One significant difference was shown in this study. Conventionally raised pigs diagnosed with osteochondrosis had more severe lesions in the distal growth plate of radius and ulna than the corresponding group of pigs raised organically. No significant difference was shown between the groups when all pigs were included. .

Sweden?s energy consumption is divided into three major sectors. One of them is the industry sector. One third of Sweden?s energy consumption is converted in the industries.

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.

Do ceramics have to be static? This was the question that spurred me into this work, and what kept me working on to achieve the possibility of motion in my ceramic objects. By combining the knowledge gained through my former education as an avionics technician with my interest in the ancient ceramic craft, I strive to create kinetic ceramic handicraft suitable for interaction with an audience.By a series of different phases I slowly go from understanding what kind of motion I want my objects to have, to actually realizing this motion in three-dimensional objects. Through the use of simple models made from corrugated fiberboard followed by more advanced plaster models, combined with different complementary materials such as bicycle inner-tubing and recycled aluminium cans among many others, I, through a vast series of testing, slowly build up a knowledge base later applied to the ceramic objects.The result is for me a success; I have found a way for me to combine ceramics with mechanics. Through this I have created kinetic ceramic handicraft intended for interaction with an audience..

This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.

Detta examensarbete omfattar ett förslag på utformning av en utställning med Interactive Institute som uppdragsgivare.Syftet med examensarbetet har varit att utforma en utställning till ett antal prototyper som utvecklats i projektet ?Static!?. Prototyperna visualiserar energi på olika sätt där tanken är att uppmärksamma användandet av energi. Vi har arbetat med att skapa ett utställningsförslag med god informationsdesign som ger medvetenhet om energianvändning hos målgruppen.Vi har undersökt hur man skapar uppmärksamhet hos besökare, hur man kan göra utställningen informativ utan att någon står och berättar om den samt hur man undviker att besökare vidrör prototyperna i utställningen. För att skaffa oss de kunskaper som behövts för att genomföra examensarbetet har vi gjort litteraturstudier, genomfört flera intervjuer, gjort en enkätundersökning samt gjort fältstudier.Examensarbetet har resulterat i ett idéförslag som visualiseras med hjälp av datorskisser.