Background: The majority of the occupational accidents and work-related diseases at Swedish workplaces occur due to poor ergonomics during lifts and transportation of objects. The most common consequence of poor ergonomic conditions is low back pain (LBP) and the risk of developing LBP increases as the mechanical loading on the intervertebral disks grows. This study has investigated the biomechanical loading in the low back during two different types of patient lifts. The first lift (lift A) is developed by Modern Arbetsteknik (MA) and the second lift (lift B) is a common lifting technique among care workers. Objectives: The aim of the study was to identify any advantages or disadvantages with MA?s lift, regarding shear and compression forces in the L5/S1 disc.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

To be able to handle tomorrows need for limited energy consumption we need to reduce our use of energy. The building sector stands for around 40 % of all energy consumption in the society. The government has put up a goal to reduce the energy consumption in our buildings with 20 % by year 2020 and 50 % by year 2050 compared with year 1995. To be able to do reach that goal we need a more energy efficient building stock.The main part of the energy used in our buildings is used for space heating. By installing ventilation systems with heat recovery on the exhaust air it is possible to use the heat-energy in the exhaust air to warm up the incoming air.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

This study investigates a farm in Dalarna which includes 16 ha of farmland and 1, 7 ha of pasture. The purpose is to find out if it is possible to start an animal production in Dalarna. The study is set only to compare spring lamb production with nurse cow production. There are two buildings on the farm that can be used for this purpose. One is an old cowshed, and the other is an unused silo for silage with a roof on top. Both of the buildings are compared to every alternative in the calculations.

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

After a workshop in Kuopio held in June 2006, Interbull decided to go forward with the development of a system for beef international genetic evaluation and a three year project called Interbeef was launched in June 2007. The participating countries are so far limited to Europe and the only trait evaluated at present is adjusted weaning weight (weight at 200 days). The results from a first international genetic evaluation have been shared with the countries but are not yet official. The evaluation is based on data from purebred Charolais and Limousin. To achieve good estimates of proofs in an international context it is important that methods for data validation and model selection are implemented.

The world?s growing need for energy together with a desire to ward off the worst consequences of global climate change has resulted in a never seen desire to invest resources in renewable energy sources. Biogas production through anaerobic digestion is one of those growing energy sources. In Sweden there are over two hundred plants that uses this biological process to break down organic substances while producing carbon dioxide and the energy-rich gas methane.This master?s thesis has focused on development of the mixture of different organic substances that is treated at a specific plant, namely Mosserud biogas plant.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This report is written on commission by WSP Acoustics. The report studies the outdoor sound levels on school yards in Stockholm. The questions given by the company to be answered was what are the actual sound levels at diffrent school yards with low traffic noise and how can you construct a facade element that reduces the sound level from the outside and meet the indoor requirements. Mesurements for four hours was done at eight schools set north and south of the city centre. The measurement period included one school break and one lunch break.

Eutrophication was recognized in the early 1900's and results in severe algal blooms, increased biomass production and eventually leads to an altered ecosystem. In Mälardalen we find the most eutrophic lakes. Most of the applied phosphorus and nitrogen into seas and oceans comes from agriculture, and the nutrients losses are affected by local weather conditions and soil type. Guidelines for storage and distribution of manure were introduced in the 80s, and the rules were strengthened January 1, 2010. Localities and previous county administrations can whether there are special reasons, grant an exemption for manure application during winter-periods despite the current ban.In this essay I have examined how many exemptions of manure application that has been granted at the Sagån river, and what implications it has for the eutrophication of Lake Mälaren.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.