Sökresultat:
945 Uppsatser om Stability calculations - Sida 47 av 63
Studier av koppar i mjölk : en prooxidant med negativa effekter på mjölkkvaliteten
The taste of the dairy product is probably the main factor determining consumer?s dairy products choice. Consequently it is of great importance that the product tastes good and as expected every time. Off-flavors in milk can be caused by for example oxidation of the milk fat. Since copper is a prooxidant, a high copper content in the milk can cause oxidation.
Förändringar i markanvändning över tid och dess påverkan på vattenkvalitet
The EU Water Framework Directive has led that management follows the boundaries of natural catchments.The Swedish waters suffer from a nutrient overload that originates mainly from diffuse sources such as agriculture and the subcatchment of Hackstabäcken in Vallentuna Kommun, just north of Stockholm, has been chosen for this study because of its high nutrient load and because it has undergone obvious changes in land use through the years.In this study, the land use in 1902 is compared with the land use in 2011 in order to investigate if it has influenced the ability of the landscape to produce ecosystem services related to nutrient removal. These services will continue to be produced as long as the system is stable and resilient, but when landuse changes and manure from horses increases it will lead to disturbances that can convert a system from one regime in to a completely different one. That will result in loss, or degradation, of ecosystem services such as denitrification, phosphor sedimentation and adsorption, vegetation uptake and infiltration.The results of this study are based upon area calculations of landuse from old maps from 1902 and 2011. Through these maps it becomes clear that the forests in Hackstabäcken, has increased with 170 ha together with an urbanization of 311 ha, at the same time as wetlands and arable land has diminished and lakes has suffered from reductions. Wetlands have been reduced with 76 ha and the ones remaining are of insufficient quality from a nutrient removal perspective.Data from 1902 and 2011 regarding number of horses and bovines indicated a decrease in bovines and an increase in horses.
Underhållskostnader för tröskor :
Costs of maintenance on combines are a subject of interest thus it constitute a large
investment and cost for the individual farmer. Therefore it is important to have up to
date knowledge and the right facts to be able to do reliable calculations on one of the
largest investments for a farmer.
The aim of this study was to compare costs of maintenance on combine/threshingmachine
with the computer program for advising environmental issues in agriculture,
STANK. Interviews took place and data were collected by handing out questionnaires to
20 farmers. A similar study conducted by Neuman (2003) investigated costs of
maintenance and compared these with STANK. The results of this study have also been
compared and examined related to data from SLA - Skogs och
Lantarbetsgivarförbundet.
The result shows that 18 out of 20 combines were given a higher cost of maintenance
when using STANK compared to the numbers in this study.
En ekonomisk hållbar växtodling i sörmländsk mellanbygd :
We have been looking at three different types of agriculture in Södermanland, in the middle
east of Sweden. We call the different types for Intensive, Extensive and Mix. The purpose is
to get an economic defensible plan for how to run different farm sizes. We also have been
looking at the working hours and how many hours the different types will give.
We have a farm called Taxinge Gods as our pilot farm. Taxinge Gods grow 407 ha land and is
located 60 km southwest from Stockholm.
Modern statssuveränitet En analys av hur synen på statssuveränitet har förändrats med Bosnien-Hercegovina som exempel
The purpose of this study is to analyze how the parties (USA, Great Britain, UN and the European Union) legitimize their intervention in Bosnia-Herzegovina as seen from without the conceptions of sovereignty and intervention. USA and the UN have legitimized their intervention on security reasons. The American president, George W. Bush, claimed that democracies never engage in war with each other and that democracies were prosperous just because they were democracies. According to the president, that is why it is important to democratise the whole Balkan region to protect the international community from terrorism which grows in unstable and undemocratic states.
Analys av lageregenskaper utifrån mätningar i testrigg
Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.
Social Return on Investment, SROI, the value added for families before and after using Solvatten in the Bungoma district in Western Kenya
The lack of fresh and clean water today causes severe problems, mostly in developing countries. Waterborne diseases like typhoid, cholera, amoebic dysentery and diarrhea create health problems and deaths among people. There is a need for low cost interventions like household-based water treatment and safe storage (HWTS). Solvatten AB is a Swedish company based in Stockholm. Their product, Solvatten, is a household water treatment unit that can treat water containing viruses, parasites and bacteria.
Är etiska fondinvesteringar försvarbara : vad kostar etik?
Recently, the selections of ethical funds are increased; at the same time investors with social and moral preferences have increased in the capital market. There are currently debates on whether ethical funds perform better or worse than funds without ethical criteria. This also involves a vivid discussion on whether investors know about the consequences of investing in ethical funds. Therefore, this study involves theories about the rationality and decision theory, in addition to what mainly control the investment decisions. The study also discusses portfolio theory since this is one of the underlying theories behind fund management and its development.The purpose of this study is to explain if ethical limitations in the selection of securities affect risk and return in the fund portfolio.
Externa kostnader för viltolyckor
The objective of this paper is to estimate monetary and non-monetary costs for the huntercaused by deer-vehicle collisions in Sweden. These costs include losses in hunting value as wellas time and money efforts related to the handling of wildlife casualties. The calculations arebased on available statistics from 2004 on deer-vehicle collisions involving moose, deer, roedeerand wild boar and on telephone interviews with hunters involved in the tracking of injuredanimals. Altogether, the annual loss in hunting value for moose was assessed to approximately30 million SEK based on the 2004 accident statistics. For roe-deer and fallow deer, thecorresponding figure was approximately 56 million SEK and 1.2 million SEK, while wild boaraccounted for 1.3 million SEK, respectively.
Energikartläggning hos RostiGP i Gislaved
In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.
Visuellt typinstrument : en metrologisk studie
Visual Type Instrument - VTI, is a tool containing a typeface and a set of geometric calculations that generates numerical data in spreadsheets. The data is determined from the typefaces visual dimensions and is used to calculate leading, type size, margins and format. The aim is to offer, for all of those working with typography and design, a practical way to manage text, image and format in relationship to visual size. Instead of using point measurements, VTI uses a new device called Edo. An Edo is the same as one twelfth of a millimetre.
En utvärdering av IT-investeringar på banker med fokus på IT-styrningsmetoder
This report discusses the IT archetypes "governance strategy" and how it could be linked to the IT benefits at the company. The study is based on IT investments that have taken place in ten banks operating in Sweden today, where the reality was modeled on the basis of a questionnaire survey and an additional interview. The aim was to examine whether it is possible to find any correlation between the governance in the banks and obtained benefits for an IT investments.While the competition is intensifying in most companies there is a greater demand for efficiency in IT. The need for IT solutions is greater than ever and the number of IT investments is increasing significantly in most workplaces today, especially on banks. But even if the investments are increasing in numbers it does not necessarily mean that all types of investments are effective and beneficial to the company.
Skapandet av ett byggnadsfysikaliskt detaljbibliotek åt byggnadskonstruktörer : fokus på fukt- och värmetillstånd i köldbryggor
Det konstrueras i stor utsträckning bristfälliga detaljlösningar på byggnader i dagsläget. Den bärande stommen i konstruktionen prioriteras ofta medan det inte ägnas lika mycket fokus åt att tillgodose de byggnadsfysiska aspekterna. Anledningen till de bristfälliga detaljerna är även att den som utför arbetet saknar rätt kunskap och tid. För att skapa en förbättring behövs ett hjälpmedel!Kunskap och erfarenhet om hur bra detaljer skapas finns redan i företag, svårigheten är dock att sprida kunskapen till de som är i behov av den.Målet med denna rapport är att skapa en metodik som blir startskottet för ett omfattande arbete kring framtagandet av ett detaljbibliotek, vars syfte är att sprida byggnadsfysiska kunskaper inom företaget och inspirera konstruktörer till att konstruera bra detaljlösningar. Biblioteket ska innehålla byggnadsfysiskt utredda detaljlösningar som analyserats enligt den utarbetade metodiken.
Pilotmodeller till flygmekanisk simulator för JAS 39 Gripen
AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.
Montageplattform : För inredning av två vertikala ventilationsschakt i Garpenbergs gruva
The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.