BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

???This study has been made with the purpose of gaining an understanding of how a Swedish company may think and act concerning their internal control. An American body, COSO, have for some time published documents containing guidelines for how companies should go about this process, however, when conducting this study we were not aware of the extent to which companies in Europe and mainly Sweden used them. In order to learn about this, and also to gain an understanding of when these guidelines are appropriate, we conducted a case study with a large-sized, multinational Swedish company. We also conducted an interview with an expert in internal control monitoring, Anna-Clara af Ekenstam of Pricewaterhouse Coopers, in order to get the perspective of the evaluators in this process and to gain some insight as to whether our case is typical in Sweden or not. We found that our company disregards certain aspects of internal control condoned by COSO, while performing better on other dimensions.

This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.

Franchise theorists have to a large extent failed to keep up with the actual development in global franchise chains. The recent emergence of fast growing multi-unit-franchisees has fundamentally been ignored, and it has been claimed that the new phenomenon can be regarded as a mere replication of the franchisors? structure and control system into sub hierarchies. This study however, suggests that the reality is more complex. Through conducting case studies of two Nordic multi-unit-franchisees, new theories are built explaining how and why control systems are designed the way they are.

BackgroundThere are different organizational structures and control and it has been proved difficult to find a combination between these that leads to goal congruence and improved efficiency. An organization can be structured according to hierarchical levels and the decision making can be either centralized or decentralized. Organizational control can be classified according to the amount of rules and balanced scorecard can be used to weld together the structure with the control.PurposeThe purpose is to create an understanding of how two types of structures and control in an organization appears and also to investigate how these differ from one another concerning the balanced scorecard as a control system. We will also investigate how the variables goal congruence and efficiency are affected by the implementation of the balanced scorecard.MethodTo answer the purpose of this thesis we have mainly used the qualitative method since we have studied two organizations thoroughly through interviews on different levels of the organization. The study also has some quantitative elements since we wanted to get a more truthful picture of the organizations.

We are heading towards a huge switch of how energy is produced with fossil fuels being replaced by renewable energy sources. It is not difficult to replace the energy you use in the house and there is no need for futuristic technology. There are already many established products on the market such as high efficiency vacuum solar collectors, heat pumps & small wind power stations that can supply the energy being used in a house. The company Sol & Energiteknik SE AB in Huskvarna has many different products which can reduce the need for an outside energy distributor. An average house in Sweden uses 15 000 kWh for heating, 5000 kWh for tap water and 5000 kWh for electricity.

The agriculture in Sweden today uses chemical substances to control vermin, weed and diseases. This usage shows through polluted subsoil water and trace elements in the food we eat. There?s a risk that additional symptoms will arise in the future. Our product Sha Jun, developed in 2006-2007, is an attempt to try and minimize the need of chemicals in the agriculture. The idea started with the attempt to minimize the usage of pesticides on the cropland.

An inflammatory reaction is induced after release of proinflammatory mediators such asinterleukin 1 and 6 and tumour necrosis factor ?. These mediators stimulate the liver tosuppress the syntheses of albumin and endure the syntheses of acute phase protein forinstance C-reactive protein. The aim of this paper was to perform a method validation on animmune turbidimetric assay to quantify C-reactive protein in canine serum at the laboratory atSkara Animals Hospital, Skara, Sweden. The validation involved evaluation of the assaylinearity, precision, stability and recovery.The method was proved to be linear for both TruLab control and Medinor control.

This report describes the design and construction of a prototype that automatically aims a microwave link towards a target. The link, that is located on a mobile aerial mast, is used by Saab Training Systems as a part of an infrastructure network. The report also discusses the development of a GUI that communicates with the control unit by Bluetooth.The control unit, called Pan/Tilt-controller, controls the position of the link by stepping motors. One motor controls the azimuth angle and the other one controls the elevation angle.By a GUI the operator enters the coordinates on its own position and the targets position. Hereafter a bearing is calculated and it will be sent up to the control unit.The control unit will sense its own direction by a magnetic sensor that works as an electronic compass.

This master thesis is about designing and dimensioning a boat for transport of caravan, car, trailer or ATV. Buoyancy and stability are important properties as the pontoonboat should also be able to serve as a workboat. Many of the vessels on the market today that is being used for similar purpose are stable enough, but their hull is often similar with barges and thus too slow. This work has been to construct a boat that has good stability but also has a hull that enables it to move faster, is more maneuverable and having a more attracting design than today?s barges.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

Studiens syfte var att undersöka om det fanns skillnader i personlighet och val av konfliktstil beroende av vilken placering respondenterna hade i syskonskaran samt om Locus of control skiljde sig mellan olika åldersgrupper. Samband mellan chefers konfliktstil och personlighet undersöktes också. De 103 respondenterna som var mellan 25-75 år, 63% män och 37% kvinnor, besvarade en enkät som bestod av demografiska frågoroch arbetsrelaterade frågor om chefskap. Tre test användes; ett personlighetstest, RottersLocus of Control och Thomas-Kihlman?s konfliktstiltest.

AbstractThe purpose with this study was to get knowledge if there are any possible differences in, and correlation between, experienced stress, experienced demands, experienced control and experienced social support in correlation to shiftwork.The study was made at two central hospitals in south of Sweden and had 90 participants (78 women and 12 men) that answered a questionnaire in the current variables. The result in experienced stress showed that there were no differences between shift workers. The results showed a difference between the day- and the nightshift in the correlation between control and stress. The writers speculates that the reason why the nightshift experience high stressvalues with high control can depend on the lack of presence by higher managers, compared with the dayshift. .

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

Background: Performance measurement as a management control tool has received considerable academic attention. As the number of inter-organisational relationships, such as customer-supplier relationships, increases, there is a new scope for performance measurement as a management control tool. In order for a company to assess the effectiveness of its supplier relationships it has to define, measure and evaluate variables that are critical for the success of the relationship. The role of management control, and thereby of performance measurement, has increasingly been discussed in theory. However, empirical research in this area is still somewhat limited.