Storm water is defined as runoff from precipitation such as rain or snow. It is collected in sewage disposal systems and since it mainly originates from urban areas it can contain high levels of heavy metals, nutrients and oil etc. Polluted storm water is currently treated by different methods such as wet ponds, constructed wetlands and filter strips. This study investigates these methods, which in earlier studies have shown to give varying results regarding their treatment efficiency.This thesis has been written on commission of SWECO VIAK and was aimed at studying those parameters that may affect the treatment efficiency of nutrients and heavy metals in storm water treatment facilities (STF:s). Through literature studies the dominating treatment processes in ponds and wetlands were examined.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Although Sweden is considered to be in the lead concerning an open-minded perception of the lesbian, gay, bisexual, and transgender (LGBT) population, very little attention has been given to the elderly within this target group. The elder LGBT population?s got special needs that haven?t been made sufficiently visible, neither as a research field, from social institutions nor from the LGBT movement itself. This study has described the target group's specific needs, based on the results of a focus group consisting of older LGBT people. Their experiences and stories have given an idea of what adjustments must be made to satisfy their specific needs.

Inspired by how to sketch a light cone from a flashlight in a comic I wanted to create an armature carried only by its own light cone. To manage this challenge I sketched in an architectural and sculptural way, where I chose to ignore the function of the lamp as long as possible.As a result I developed an armature with a stunning shape, with an illusion that it was carried by its own light cone. It could be hanged on a wall, placed on a table, pushed against a ceiling or standing on the floor.Depending of its size the light cone from the light source lightens up the surface and draws attention to the otherwise forgotten wallpaper or the undisposed statue in the darkness of the city..

Forensic psyhiatric care protects the society by giving patients care to diminish risks of serious crimes. In their work the nurses use different care methods to help and support the patient in managing his or her life situation. To clarify how a group of nurses describe the nursing process in forensic psychiatric care. A qualitative study based on interviews. Six nurses were interviewed about their work in four different forensic psychiatric care units.

The purpose of this essay is to analyse the descriptions of young girls' experiences of internet contacts, which have led up to sexual abuse. The aim is to give additional understanding and knowledge concerning grooming.       Grooming means that somebody gets in contact with someone else with the intention of committing sexual violations at a later stage. In most cases this concerns adults who contact children. We have chosen to confine ourselves to focusing on the grooming on internet that has happened to girls. By means of thematic analyses of texts from the books Jag kände mig speciell, grooming på internet, 2012 and Alexandramannen, vår tids största nätsexhärva, 2009, we have found certain themes and linked them up with previous research-work and also theory of social psychology.

The focus of this essay is to investigate if there lies a difference between graffiti art that is placed in the public spaces and graffiti art that is sited in an institutional art setting; in this essay exemplified in a gallery space. My thesis is that graffiti art derives a great deal of its meaning and substance from its situation consequently making a change of cultural context also a change of connotation and understanding of the graffiti art itself.  Meaning that graffiti art situated in a communal space is different from graffiti art situated in the gallery space. They share aesthetic expression but their connotations differ; i.e. one being illegal and the other permissible making their meanings dissimilar. I have used a comparison between site-specific art and graffiti art to further strengthen my thesis concerning the importance of understanding how a change of context critically changes the substance of graffiti art..

The eutrophication of lakes and seas with the algal bloom and deficiency inoxygen that follow, has been given priority by the Swedish government as oneof 16 environmental objectives. The purpose of this project was to develop a toolbased on a simple model, limited amount of data and geographic informationsystem (GIS) to identify areas with risk for phosphorus losses due to surfacerunoff. This tool can act as a decision support to decide where appropriatemeasures should be applied with the aim of reducing phosphorus losses and bythat the eutrophication.The method that has been used is a combination of two models, one calculatingthe potential erosion while the other one identifies areas of erosion (net erosion)or deposition. This ability is of great importance because potential erosionshould be calculated on areas with net erosion. Areas with high potential erosionhave an increased risk for phosphorus losses due to surface runoff.The potential erosion was calculated based on factors which describe how topography(LS), land use (C), soil type (K) and precipitation (R) effect the erosion.All of them have been modified to a greater or lesser extent.

The purpose with this thesis is to get a compilation of all the critical bolted joints of all enginesproduced at LV Motors. ABB LV Motors produces induction engines with seven shaft heights. Eachengine size exists several variants of components ex. standard shield and flange shield. Depending onwhich components the engine is equipped with arises various types of strains in the engine's parts,certain assembly ways are more favourable than other.The most critical parts in the engine from a mechanical point of view are the screw units betweenshield/stator, feet/stator and bearing cover/shield.

The legal situation of companies costs for investing in computer software in an income tax law perspective is described by a tax law guidance that generelly acount these costs according the principles of research and development. If there is any reason to classify the costs differently, it could mean that immediate deduction not will be allowed. For this reason it is important to establish what the legal situation would be in a more nuanced tax law classification. The tax law categories that will be analysed in the thesis are research and development, inventories, intangible assets, stocks and ongoing projects. The purpose of this thesis is mainly to give examples of what such an income tax law classification can look like.While dealing with the problems of classifying the costs some situations of competition will occure.

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

In this project I have worked with creating a new kind of room in a hospital enviroment for children. The main purpose of the project has been to form a secure and positive experience for the patient while visiting a specific room at the department of childrens physiologi, at Drottning Silvias Children- and youth hospital in Gothenburg.The project was based on questions like how it is possible to move the focus from the unsecure and scary, to something secure and positive, when the patient is going through an testing situation.The target gruop included a wide age span (0-16 years old), therefore I have worked with a theme, H2O, that works for diffrent ages. In the room, I have applicated the theme in different levels that is changeable depending on the age of the patient.During the project I have presented my ideas for the staff at the hospital. We have discussed their problems, what they wish in their working enviroment and how they experience the situation for the patients. I have also asked the patients how they experience the specific room today.The result of the project is a visual idea of how you can create a room, that you don?t exepect to find in a hospital..

Mosquitoes are found in extremely large numbers in the lower parts of the River Dalälven. In the year 2000 the mosquito nuisance was especially high, resulting in foundation of the Biological mosquito control project. Since 2001 mosquito larvae are controlled by using a biological pesticide BTI (Bacillus thuringiensis ssp israelensis). The mosquito fauna in the area is dominated by flood water mosquitoes, a group of mosquitoes that are very aggressive and form new generations of mosquitoes during every single flooding event during the summer. To be able to efficiently control the mosquitoes it is essential to know the extension and locality of the flooding.

As we have been actively involved in various teaching programmes for many years, we wanted to enquire how the students and teachers understood their school and compare it to how we experienced it.  Do the students fully understand the knowledge they are receiving and can they learn from it? Do the teachers believe what they are teaching is understood by the students? What is the underlining knowledge of social practices in the school, which can inspire students in different ways? The aim of the study, as the title suggests, is to convey and describe the various methods practiced in a specific social practice.Our project is a quality study.  We have used observation, specific intense individual and group interviews. In the result, arrives a different message through what there is possible for the students to learn about the matter. These messages are visible in the different attitudes the teacher, the school and the organisation have vis-à-vis the matter. In the discussion, we have focussed on what has arrived in the result around the teacher's and the organisation's attitudes.

At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled wire. Upon heating chromium steel wire, a rich oxidelayer forms on the wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.