Competence Portals are software tools that are intended to make it easier for persons that have had no previous contact to find and contact each other. The portals can address areas ranging from finding an expert within an organisation to the marketing of the competence of a region or a research centre to other organisations. The purpose of the thesis is to examine the necessity of Competence Portals in research-intensive organisations. Important characteristics of the information in such portals have been identified and used as a basis for recommendations regarding how Competence Portals could be designed. Furthermore, the thesis focuses on the task of finding a source of knowledge within an organisation.

The intent with this paper is to investigate the medieval habitation in central Old Uppsala. This time-period has over the years been neglected. Therefore I wish to summarize and ana-lyze the medieval habitation to see what can be said about its continuity, and also to investi-gate why it is located in certain areas.Due to the amount of source material I have limited my investigation area to the central Old Uppsala. It is possible that this limitation will affect the result of the research but without the limitations the investigation area would have been too large to handle.The source material has been collected from excavation reports and the summarized. My theory is material culture and material agency.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

ERP system is the information technology that has had the biggest impact in companies? development and way of working in today?s world. ERP system is divided in several applications with a modular software design that allow people in every department in a company to store and retrieve information accurately and in real-time. This master thesis investigates attitudes toward ERP systems among business organisations and ERP suppliers with the overall purpose of analysing to which extent a new ERP system will bring change in the business process. The purpose of this thesis is to make a survey of attitudes toward ERP systems among business organisations and ERP suppliers.

AbstractTitle: Where does the news that you read in your localpaper come from? (Vilket ursprung har nyheten som du läser i din lokaltidning?)Number of pages: 45 (57 including enclosures)Author: Elin RantakokkoTutor: Göran SvenssonCourse: Media and Communication Studies 30 hpPeriod: Fall of 2007 University: Division of Media and Communication, Department of Information Science, Uppsala University Purpose/Aim: This paper has the aim to make a systematic survey of the information source and channels that local newspapers use. How much space they get in the paper and how the newspaper works with these sources and channels. The front pages of the newspaper are going to be compared with the insides of the newspaper. The reports roles in the making of news are also examined.Material/method: To be able to answer my questions I?m going to use three different methods.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier.

Scania Top Team is a competition where the best mechanics in the world are competing against each other. In 2011, the world final was recorded and this material is now used to see which problem solving strategies these top of the line teams are using to solve the realistic problems assembled in front of them. To help them, the mechanics are allowed to use two of Scanias IT-systems: Scania Multi and Scania Diagnose and Programmer 3. This report consists of two parts. The first part is the development of a method to analyze the recorded material.

Denna rapport sammanfattar resultat av ett examensarbete på en högskoleingenjörsutbildning som utfördes av två studenter på Malmö högskola. Arbetets syfte var att genomföra en mängd olika experiment med accelerometer, barometer och GPS i en modern smarttelefon. Ett antal scenarier för en tänkbar sensoranvändning i applikationer formulerades för att vägleda olika experiment. Experimentdata dokumenterades noggrant och analyserades med avsikten att skapa en databank med information för framtida studier. Analys av data inkluderar höjdbestämning i naturen och i byggnader med hjälp av barometersensor, geografisk position med hjälp av GPS, hastighet och acceleration under en hissfärd med hjälp av accelerometer. Rapporten innehåller en omfattande litteraturstudie om användning av sensorer vid inomhuspositionering. Från analys av mätdata, kom vi fram till slutsatsen att är möjligt att beräkna höjden från barometerdata med bra noggrannhet under optimala omständigheter. GPS höjden från mätningarna har stor felmarginal jämfört med den verkliga höjden samt när den jämförs med den beräknade höjden från barometern. Genom att utföra en numerisk integration på accelerometer-data kom vi fram till att det är möjligt att beräkna ungefär hur långt man har färdats med en hiss, dock att vissa detaljer måste tas i beaktning..

SummaryAt the summer festivals and it?s campsites there are each year thousands of tents left behind. Last year, at the Peace and Love festival in Borlänge, 220 tons of garbage was left behind at the festival area, much of which is tents. 69% of festival goers have at some point left behind a tent on a festival campsite. Many of these tents is purchased very cheaply, for a single festival.

Aggression between laboratory mice is a common problem and can result in welfare issues such as mice hurting or killing each other and also stress. Swedish laws and regulations clearly states that mice must be housed with a companion due to their natural social structure. Many studies have investigated the effect off enrichment, group size, cage size and other potential changes in in their environment on the occurrence of aggression. Even with these changes aggression can exist and therefore a new solution was tested in this paper. The proposed solution was to house an intact mouse with a castrated one and thus fulfill laws and regulations while still maintaining the physiology of one of the mice for the purpose of medical experiments.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..