At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser scanning.This thesis contains a comparison between the methods terrestrial laser scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Detta är slutreflektionen över ett kandidatarbete gjort av Karl Tannergård och Per Thulin. Arbetet har gått ut på att skapa en prototyp av en barnspel baserat på Inger och Lasse Sandbergs böcker om Lilla Spöket Laban och hans familj. Spelet är tvådimensionellt och vänder sig till barn i åldern fyra till sju år. Det är skrivet i programmeringsspråket Python och använder multimediabiblioteket pygame. Utvecklingen har skett i samarbete med animationsstudion PennFilm AB..

Detta examensarbete är utfört på Sandvik Materials Technology (SMT) i Sandviken. SMT har under ett antal år arbetat mot att infria deras två största kunders, Atlas Copco Secoroc och Sandvik Mining and Construction, önskemål om en leveransprecision på 95% och en ledtid på tre dagar för storvolymprodukter av bergborrstål. Idag är leveransprecisionen tillfredsställande medan ledtiden är fem dagar. Examensarbetets syfte är att analysera vad som krävs för att infria Atlas Copco Secoroc's och Sandvik Mining and Constructions önskemål om tre dagars ledtid för storvolymprodukter. Ledtidsreduceringen ska åstadkommas med nuvarande skiftform och utan att leveransprecisionen påverkas i negativ riktning.

Incident response plans are faced with new challenges as organisations expands to the cloud, this thesis aims to highlight these challenges and their potential solutions. Our work has focused on managing the incident response in contrast to earlier work that has been focusing on preventing them.As with any development, security is seldom prioritized. Instead the focus are often aimed towards usability and functionality, which means incident response plans are written, implemented, forgotten and finally becomes obsolete. This could result in an organization losing their ability to produce acceptable forensic images, avoid severe downtime, or prevent similar incidents in the future, which are all important parts of incident response.Traditional incident response plans does not address incidents in the cloud. Thus, an absence of guidelines for managing incidents in the cloud becomes apparent.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.

Thesis in Musicology and Artistic Practice by Anders Soldh. Part of the work for the master?s degree. Studies from School of Music, Theatre and Art, University of O?rebro, 2007.

The present study examines a new production line of glue-laminated wood (glulam). The glulam is produced from non-planed boards of spruce, which also is convex, that is pressed together with high pressure during the gluing. According to a economic calculation, the material has a economical potential mainly on account of the absent planning. The study mainly found out that the shear strength of the material tolerated the demanded values in standard SS-EN 386, but the delaminating values did not. Since there are more areas to be studied around the material, the prospect to achieve the right delamination values is seen as positive..

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

Projektbeskrivning: Bakgrund: Vid valsning av tunna band med hög hållfasthet används reversibla mångvalsarsverk. Kundkraven är höga vad gäller bandens planhet. Planheten kan styras genom de planhetsställdon som valsverket är utrustat med. Syfte: Förvärva kunskap om hur de olika ställdonen inverkar på planheten. Varje enskilt ställdons inverkan på planheten kan undersökas genom att genomföra en föreskriven förändring av ställdonets läge och därefter utvärdera planhetsförändringen som uppkom.

Title: Music video: Twelvestep ? DownInside Made by: Benjamin Bondesson Christian Edgren Tutor: Silvio Ocasic Course admin: Peter Ekdahl Purpose: To create a music video that we can stand, that challenges us in the creative process. And to help a struggling band with another medium to spread their music. Goal:We intend to create a great product that is demanding and educational to us. Especially when it comes to cooperation and editing/post production. Keywords:Music video, digital video, film.

Title: Brand loyalty and switching behavior ? A case study of the Swedish ketchup market Authors: Marcus Andersson Mattias Hedblad Tutors: Björn Bergenståhl, (Professor) Department of Food Technology, Engineering and nutrition, Division of Food Technology, Lund University Frans Melin (MBA PhD) Department of Business and administration, Lund University Ragnar Sjögren Johansen, (Marketing Manager Sauces) Procordia Food AB Problem: The market for daily groceries is mature and the competition has become tough. For the manufacturers to be able to grow they have to compete for the existing consumers. The problem is for the manufacturer to protect its consumers and still be able to gain consumers from its competitors. Purpose: Our ambition is to study consumers brand loyalty for daily groceries, with the purpose to understand how loyalty starts, how it can be strengthened, and how it can be broken.

During the spring semester 2012 Robin Westlund has accomplished ?Controlled interaction for more creative meetings - Summit Flexiwall? with the individual focus on social communication based on visual interaction in future office. The project was a part of the course Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which includes 22,5 ECTS Credits. The course is a part in the program Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.Assigner of the project was Moelven Eurowand AB with their head office in Örebro. The company manufactures and assembles entire room solutions for offices.

Since the release of Avatar in 2009, the 3D movie industry has experienced an apparent growth. Almost all blockbuster movies are being released in 3D at the cinema, but the 3D format has been met with mixed opinions by the consumers. Some argue that 3D is the future, while others believe that the 2D format is enough for an appreciated movie experience. Through a qualitative survey, twenty participants with 3DTV in their homes answered questions regarding their experience of 3D movies and what improvements they desire. We suggest that 3D film creates immersion, realism and effects that 2D films can´t handle.