The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3Solid over bark.On average 1518 stems/ha was harvested.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

SFEHA project about a clothing brand and a new kind of showroom that looses it´s structure during the process.But managed to find the core and produced a personal mirror of prints for a greater cause.Sfeh is the brand with quality and humor in focus and the will to push the boundries. With prints based on free drawing and smart thinking as it´s essential base.The project resulted with a various collection with mostly T-shirts but also textile gloves and bed sheets..

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to Solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

The aim of this master thesis was to create a dynamic model for the processes in a Solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

Today's society is facing major challenges. In order to reduce the climate impact fossil fuels should be replaced with fuels that do not contribute to the greenhouse effect. The growing population generates organic waste originating from industry and households so called organic fraction of municipal Solid waste (OFMSW). Through anaerobic digestion, waste can be utilized to produce energy-rich methane gas. In this way, waste can be a resource instead of a burden on society.

This master thesis investigates quality procedures and measuring of Solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for Solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

Wooden joist slabs is a common type of floor in residential buildings. Higher demand and production of residential buildings increases the possibilities of profiting by optimizing the system of joists in a variety of areas. Spring and deflection is something most people can relate to since it?s not that uncommon to hear furniture rattle when you walk over a wooden floor. To remove the presence of those kinds of vibrations the system of joists have to be made stiffer than the standard joist construction that is used in today?s constructions.

Pomace is the Solid remains (i.e. stems, pulp, seeds, and skins) after pressing for juice. The annual production of apple pomace is 593 000 ton worldwide. Its field of application depends on local conditions. In order to investigate the field of application of apple pomace in the Southern Sweden, six persons on companies with production of apple juice were interviewed.

With the increase in IT related crimes the IT forensics has more work ahead of them and it is constantly rising. The analysis software called EnCase is widely used by IT forensics all around the globe and with it comes an internal programming language called EnScript.This paper is designed to examine whether a manual for the programming language EnScript can make a difference in how efficiently the work is.A study between two groups has been made and an evaluation of the results between the two groups.The manual provided aims to introduce the reader to EnScript as a programming language and also to provide a Solid foundation to build on in further work with EnScript.

Android is one of the leading software platforms for the new generation of smartphones. The market for applications is growing rapidly. So to be able to compete with such large competition the applications need a Solid and stable development methodology. Therefore have we created an application based on a test-driven development, to investigate if the methodology was applicable on the Android platform. The conclusion is that Android?s suitability for test-driven development is dependent on the application that is being developed and if difficulties concerning the testing framework can be avoided.

This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.

We have chosen to focus our study on conflicts and handling of conflicts in a classroom environment. We are addressing problems such as the teachers? roll in a conflict, the importance of Solid leadership in the classroom, students? agency, defense mechanisms in coping with conflicts and so on. In this paper there is a review of different perspectives on conflict and of understanding why conflicts occur the different reasons for the conflicts. Our observation study took place in a grade three classroom, in a mid-sized town, during a regular school day.

There are two objectives of this study.The first one was to study the new instrument Deltack fromPrufbau, and with the new knowledge, study the interaction between blanket and paper.Deltack is a new instrument to measure the ink splitting force. Blankets from an earlier study doneby GATF have been montered on 12 different Deltack print forms and those have together with Deltackbeen the base for this project.This study together with information from GATF?s study shows that some of the blankets have ahigher capability to adsorb ink. Those blankets generate a sharper shape on the force curve, they havea lower dot gain, but they print not as good Solid..

This report looks at the possibility of designing a universal adapter for Flat Blade windshield wipers in cooperation with European Automotive Supplier AB.To understand and see if this is possible, a research and an extensive patent search where done. Then to add structure to the project a Ganttschematic were developed. To generate good and Solid ideas, different methods for product development were looked upon.When a method was chosen and applied, a series of concepts emerged. Now the focus was to design and construct all the pieces. The desired manufacture procedures were looked upon as well as materials.