Enligt Carlsson och Rönnqvist (2005) och Frayret et al. (2007) blir det allt viktigare att arbeta med supply chain management inom trävaruindustrin. En utmaning är att finna ett arbetssätt för att hantera variationen i kundens efterfrågan. Idag hanteras variationen oftast genom onödigt stor lagerhållning (Lee et al., 1997b; So och Zheng, 2003).                                                                               Syftet med studien är att utreda påverkande faktorer som bidrar till en varierande efterfrågan inom trävaruindustrin samt föreslå hur uppkomsten av dessa kan undvikas. För att svara på syftet har tre frågeställningar tagits fram och en fallstudie genomfördes på ett hyvleri.

The aim of this thesis is to define digital library, and to investigate a relation between the construction of a digital library and user needs. The main questions to be answered are: 1 What criteria was used when constructing a digital library, particularly concerning issues like purpose, function, design, supply, services, resources and future development of the digital library? 2 How do the digital library system designers and system builders criteria correspond with those of postgraduate researchers? And what factors affect the use? A digital library is an enterprise that gives access to information stored digitally and directly available on the net. The crucial is that the enterprise has a control over collection of information and responsibility to make it available to a defined group of users. In order to investigate the relation between the construction of the digital library and user needs, I have interviewed five key people involved with the work with the digital library and twenty postgraduate researchers from the Gothenburg University.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

Researchers and practitioners have recognized the need for ?transforming? every policy of the company into a competitive advantage tool. Thus, both the pricing approach and the supply chain practices of the firm have emerged as an important determinant of success. In this study, however, we are not only interested in these two aspects, but also in a third one-namely cultural conflicts as an obstacle and challenge. The interaction of the tree factors is extensively presented against the backdrop of Skanska and four of their closest Polish suppliers.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

In article 1.2 c) EC regulation 852/2004 it says that the regulation is not applicable to producers who directly supply small quantities of primary products to the final consumer or to the local retailers who in their turn directly supply the final consumer. An almost identical regulation can be found in article 1.3 c) EC regulation 853/2004. The supply by a primary producer of small quantities of primary products, of animal origin or not, are consequently excepted from these two hygiene regulations. In article 1.3 EC regulation 852/2004 and article 1.4 EC regulation 853/2004 it says that the member states are to establish national rules in their national legislation as to the regulation of exception for small quantities. The aim of this study was to investigate the handling of small quantities of primary products distributed locally in Sweden but also the handling of these products in other countries.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

The increasing oil prices during the last years have made it profitable to use cereal grains as a fuel. When compared with wood, cereals contain higher amounts of Cl, S and ash. The Cl and S content makes the gases from cereal combustion more corrosive than gases from wood combustion. The goal of this master thesis was to find out the variation of Cl, S and ash content for oat grain grown under different conditions. Oats was chosen because in Sweden it's considered as the cereal with the best fuel qualities.

I dagens samhälle är det viktigt för företag att ha en effektiv försörjningskedja. En kedja blir ineffektiv när den innehåller mycket osäkerhet som t.ex. brister i informationsflöden, vid lagerhantering, skapandet av prognoser eller produktion. IT stöd finns, vilka ger möjlighet att minska dessa osäkerhetsfaktorer. Automatik i form av mjukvaruagenter är ett sätt att bidra till minskad osäkerhet.

The Swedish Armed Forces have undergone a significant change where we have gone from recruitment through duty and replaced it with a voluntary based defence. Across Europe, countries that have undergone the same type of change demonstrate change in the quality of those recruited. The focus in this paper is how recruitment quality looks in Sweden after three years of volunteer based defence and if officers at P7 can see a change in quality on those recruited. This work aims to investigate whether soldier quality has changed from conscription recruited to voluntary recruited soldiers. The question that the work tries to answer is whether one can see a change in quality in soldiers and in that case how.The result can be summarized as one begins to see a change in recruiting quality but it is not something that is visible at the regiments.

Logistikens vikt för företag blir allt större. En mängd faktorer i företagens omvärld tvingar företag att följa med i utvecklingen för att behålla sin konkurrenskraft. Den ständiga förändringen som sker inom logistikområdet präglas av en mängd tidstypiska trender. Företag med en betydande logistik tvingas därför ta ställning till dessa trender, som på olika sätt sätter avtryck i organisationer då de väljer att implementera tillhörande arbetssätt och metoder från trenderna.Studien undersöker hur företag påverkas av logistiska trender. Detta sker genom att beskriva hur de ser på utvecklingen inom logistik och de trender som utvecklas inom området, samt att se till hur trenderna har satt spår i företagens verksamheter.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

Food insecurity is a great problem worldwide and Ethiopia is one of the sub-saharan countries that are suffering from poverty and food insecurity and a large part of the population are living in a state of undernourishment. To reduce these problems, a successful horticulture production can be an important factor. Compared to other crops, fruit production in Ethiopia has not been a large part of the agricultural sector. However, the demand on the domestic market is increasing as well as the production for avocado and mango. To increase food security it is important to focus on ways to decrease post-harvest losses of food products and not only have the productivity of agriculture in focus.

Purpose: The Swedish correctional service is on the brink of its biggest expansion in history, due to political investments related to battling a rise in gang related criminality. The purpose of this thesis is to exam and understand the strategic competence supply work from an employer perspective and investigate the elements included in the Swedish correctional service competence supply form a regional perspective. The study specifically focus on what strategies the Swedish correctional service employ to attract, recruit, develop and retain workforce. Theory: The theoretical framework of the study includes among others, a model divided into three different phases (within, in and out) within competence supply, the demand-control-support model, push and pull factors, as well as the two-factor theory. Method: This study has a qualitative approach with semi structured interview as its specific method. A total of seven interviews were conducted with personnel within the swedish correctional service. Results: The main challenges are related to recruitment, staff retention, support of managers, and the fact that many correctional officers do not have time to complete their training before leaving. The latter is particularly significant are of concern.