Horse keeping is gaining an increasing interest in Sweden. During 2004 to 2010 the number of horses increased with 10 - 20 %, and was estimated to be 362 700 in 2010. Julmyra Horse Center (JHC), situated in Heby municipality, is a gated community for people sharing a large interest for horses and a vision of a sustainable horse management has been formulated. This study evaluates how the horse keeping of today at JHC, and how an expansion of the horse keeping may affect the risk of enhanced phosphorus load to the nearby lake system Vansjön ? Nordsjön.

This paper deals with variations in the osteological material of dog (Canis familiaris L.) from the Mesolithic Scania, southern Sweden. The general aim is to discuss the use and specialisation of dog during the period, and differences or relations between cultures and traditions within the Mesolithic period. The study is based on a analysis of the bone material from the sites; Ageröd I:A-D, Ageröd I:H-C, Bredasten, Bökeberg III, Hög, Löddesborg, Ringsjöholm, Segebro, Sjöholmen, Skateholm I-II and Tågerup, phase 1-3, with datings from Late Maglemose Culture to Early Ertebølle Culture. The seminar paper also includes descriptive statistics of the osteometrical data of Denmark, from several studies of Degerbøhl (1927) and Noe-Nygaard (1995, 2003). The study is focused on the relation between size, robusticity, muscle grooves and ligaments of mandibula, tibia, radius, humerus, femur and metacarpalia/metatarsalia.

SammanfattningSyftet med studien var att undersöka om det fanns någon skillnad i muskelaktivitet ivadmuskulaturen när olika eller inget vadskydd användes vid vadpress. Jämförelsegjordes mellan vadskydd (A), stickat av ett modifierat polyolefingarn och ett tillstickningen identiskt och utseende näst intill identiskt vadskydd (B) av polyamid,samt utan vadskydd.Testgruppen bestod av 13 män från militärhögskolan i Halmstad. Testpersonernagenomförde vadpress i smithmaskin* på en belastning av 50% av 1RM*.Muskelaktiviteten mättes med hjälp av sEMG* och tre mätningar per persongenomfördes. Det första utan vadskydd, andra med vadskydd A och det tredje medvadskydd B. Resultaten visade ingen signifikant skillnad i muskelaktivitet mellan användandet avvadskydd A och vadskydd B eller mellan vadskydd A och utan vadskydd.Mätmetoden sEMG är känslig och kan ha gett missvisande resultat. Fler studierbehöver göras dels angående skillnad i muskelaktivitet och dels för att testavadskyddens eventuella andra egenskaper, positiva eller negativa.

Den första serietillverkade hjulskotaren i Sverige presenterades 1962. Skotaren blev revolutionerande för mekaniseringen av terrängtransporterna. Hästarna ersattes och var i början av 1970-talet nästan borta från skogsbruket. Mekaniseringen innebar stor produktivitetsökning med ökade avverkningsvolymer. Hjulburna skotare har sedan introduktionen tills idag varit dominerande i det svenska skogsbruket. Under 2012 fanns ett fjortontal tillverkare av hjulskotare, vilka succesivt fått bredare hjul, mer avancerade motorer och transmissioner. Syftet med denna studie var att sammanställa tekniska data och försäljningssiffror i Sverige för hjulskotare tillverkade i de Nordiska länderna från deras introduktion 1962 fram till och med 2012 samt att besvara den frågeställning som ställts upp i studien genom att statistiskt styrka trender genom att testa hypoteserna H0: ?1 = 0 och H1: ?1 ? 0. Litteraturstudien har utförts med datainsamling av tekniska specifikationer samt årtal då serietillverkning av skotarna påbörjats.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

Chapter 6 of the Ch?ndogya Upani?ad has often been treated in works on early Indian philosophy, as well as in some comparative studies on color symbolism. Attempts to place it in a larger framework against the background of late Vedic religion are, however, few, the rationalistic and ?tradition-challenging? appearance of the text having repeatedly been emphasized. But the doctrine contained in the text ? a cosmologic teaching on the three elements constituting the universe, each being characterized by a color (red, white, black) ? and their microcosmic counterparts in the human body, does have some clear affinities to the worldview of the Br?hma?as and ?ra?yakas, which posits a series of similar correlations (bandhu-) between macro- and microcosmos.

Chapter 6 of the Ch?ndogya Upani?ad has often been treated in works on early Indian philosophy, as well as in some comparative studies on color symbolism. Attempts to place it in a larger framework against the background of late Vedic religion are, however, few, the rationalistic and ?tradition-challenging? appearance of the text having repeatedly been emphasized. But the doctrine contained in the text ? a cosmologic teaching on the three elements constituting the universe, each being characterized by a color (red, white, black) ? and their microcosmic counterparts in the human body, does have some clear affinities to the worldview of the Br?hma?as and ?ra?yakas, which posits a series of similar correlations (bandhu-) between macro- and microcosmos.

SammandragDetta examensarbete utförs i samarbete med företaget Componenta Wirsbo AB. Componenta smider detaljer till den tunga fordonsindustrin. Företaget använder sig av sänksmide där materialet formas genom slag från två rörliga verktyg. Smitt material har mycket goda hållfasthets egenskaper samt en mycket homogen struktur.Företaget har som miljömål att minska sin uppvärmningsenergi med 5 %. Componenta arbetar även med ett Leanprojekt som ska leda till en mer kontinuerlig produktion.

Environmental destruction is a growing problem in our world. Almost every day there are new reports concerning that we have to do something about the greenhouse gasses. Simultaneously is the human constantly more eager to have a life with higher standards and therefore uses more energy. The environment is a question that is highly up-to-date and more people try to find solutions on how to save our planet. One way to decrease the energy demand is to build passive houses, where the houses don?t have any active heating.

Projektet omfattade en jämförelsestudie avseende stomsystem. Studien undersökte ramverk och fackverk/balk/pelar-system och genomfördes självständigt med stöttning av Ramböll AB´s kontor i Falun. Syftet var främst att undersöka vilka skillnader det finns mellan tvåledsramar och fackverk/balk/pelar-system för lätta hallbyggnader och försöka få klarhet i varför fackverk/balk/pelar-system är det dominerande systemet i Sverige eftersom övriga Europa har tagit en annan utveckling och domineras av tvåledsramar. Studien undersöker skillnaderna mellan systemen i en hallbyggnad med förutbestämda mått i stål.Inledningsvis gjordes en litteraturstudie för att få en bredare bakgrund av systemen och en bättre förståelse om förutsättningarna för varje system. Efter litteraturstudien kunde sedan ett typhus och beräkningsunderlag för jämförelsestudien tas fram.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

Comfort analyses regarding human induced vibrationsIt is not too common among civil engineers in Sweden to perform comfort analyses considering the vibrations caused by human activities. In addition, the Swedish standards lack requirements to be used for comfort analyses in design of floor-systems. The demand for large spans in combination with slender slabs, is today a reason to investigate the floor-system constructions, in order to prevent disturbing vibrations and oscillations.The purpose of this thesis is to create a guide for how a comfort analysis, considering vibrations, should be implemented. Göran Svedenbjörk who is an expert in structural dynamics has been interviewed where he presents his latest project Värtaterminalen and answers some questions about vibrations due to human activities.Floor-systems, consisting of concrete slabs supported by steel or concrete beams, have been investigated with simulations in the finite element program Abaqus. In the simulations, the influence of various factors on the natural frequency of floor-systems and the acceleration level caused by dynamic loads, is studied.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

The interest in horses and equestrian sport is constantly increasing, and so is the will in both riders and trainers to learn more about the effect the rider and its equipment have on the horse. The last twenty years, more and more studies have been performed were the horse and its kinematics have been in focus. The access to more advanced technology has made it possible to study areas, which earlier have been hard to reach. The knowledge about kinematics in the horse, and how riders and their equipment interact with the horse?s movement, is also of great interest to veterinarians in equine practice.