AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

In the recent years auditing scandals all around the world, deficient internal control has attracted a lot of attention. This has contributed to further requirements on insight and internal control. Those scandals have seriously damaged the auditor?s profession and contributed to a reduced trust among the public. Therefore an extensive work to recover and stringed the trust was started all around the world.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

Today, our cows experience a harder pressure to achieve higher milk yield. To manage this challenge the animal needs first class feeding and treatment. An important aspect of the feeding is to fulfil the need from the cows of especially fiber; and fiber with a sufficient proportion of long particles. Both too much and too little fiber is bad for the wellbeing of the cow, and she might get diseases like acidosis. Many models for feed management have been developed to secure that the animal gets enough of e.g. fiber with a sufficient proportion of long particles.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

Städerna växer och samtidigt ökar efterfrågan på närodlade och ekologiska grödor. För att klara av att producera närodlat och mer hållbart skulle ett alternativ vara att odla i så kallade vertikala växthus. I Kiruna finns Sveriges största malmgruva som drivs av företaget LKAB vars olika processer leder till spillvärme. I Kiruna är klimatet kallt jämfört med större delen av Sverige och därför erfordras uppvärmning om odling ska kunna ske året runt i ett växthus. Examensarbetets uppgift är därför att undersöka hur man kan utnyttja spillvärme till ett vertikalt växthus i samband med en ny kontorsbyggnad på LKABs gruvområde.

Today, there are no regulations saying that cows must have access to some kind of shelter at pasture during the summer. In more tropical countries, it is well-known that dairy cows might suffer from heat stress when exposed to sun and high temperatures. The well-being of the cows is thereby reduced and the production may also decrease. In Sweden, no research has been done in the area and therefore it is now a clear need of improved knowledge.The purpose of this study was to investigate the importance of shade for dairy cows in Sweden. The behaviour of 30 cows was examined to see any differences between cows with access to shade and cows without access to shade.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

Två olika värmesystem i två flerbostadshus har analyserats. Målet med analysen är att få en uppfattning om vilket värmesystem som är mest fördelaktigt i flerbostadshus. I analysen jämförs två olika värmesystem. I värmesystemen används två olika sorters frånluftsvärmepumpar för att återvinna värme ur frånluften. När värmepumparna inte klarar av att producera tillräckligt med värme för att täcka fastighetens värmebehov används fjärrvärme som spetsning.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

Product development is a risky business; many products never yield profit, but it is also ne-cessary for a company?s survival in a competitive business where the costumers change their requests constantly. Consumer-led product development is developed from the wish to fill the consumer?s needs and expectations and thereby be more likely to succeed. Lindell?s Gårdsslakteri AB is a local slaughter and meat processor in Västergötland.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.