Due to soft grounds in combination with seasonal variation in soil humidity, there is a lack of stands that are possible to cut during spring and autumn in some geographical regions. For Holmen Skog this sometimes means that a large proportion of the contracted private forest is cut during the winter when the ground is frozen. One consequence of this is that the proportion of winter stands in the stand bank of own forest increases while spring and autumn stands becomes a scarcity. This in combination with milder winters, especially when there is a long period of reduced bearing capacity in spring or autumn, means that the situation rapidly can become critical. The overall goal with this study was to generate basic data for decision support in the work to achieve a sustainable distribution between own forest and contracted private forest in the stand bank. The study took place at Holmen Skog, district of Umeå, during autumn 2007 and was based on interviews and an analysis of harvest planning and delivery data. The study showed that there is a problem with how the cutting is distributed between own and contracted private forest during the year and that it foremost is the proportion of winter thinning of own forest that has increased in the stand bank.

Syftet med denna uppsats är att undersöka hur olika potentiellt skadliga faktorer påverkar nyetablerade stadsträd. För att göra detta utvecklas en metod för inventering av träd och ståndort, som sedan appliceras på ett urval på 94 stadsträd fördelade på 11 anläggningar i Uppsala och Stockholm. Faktorerna som framkom som resultatet av studien jämförs med skadliga och gynnsamma faktorer enligt uppgifter från trädexperter och litteratur. Uppsatsen inleds med en beskrivning av stadsträds situation idag och historiskt, samt nuvarande kunskapsläge. Därefter följer ett metodkapitel som beskriver metodutvecklingen. Metoden bygger på inventering och analys av ett antal punkter. Exempelvis behandlas vilken information stamomfång kan ge och hur det inventerats under rubriken Stamomfång.

Essay in political science, C-level by Mikael GranathAutumn semester 2012, Tutor: Freddy Kjellström- Ideological convergence in Swedish party politics?- An analysis of ideologies of the Swedish Social Democratic party and the Swedish Moderateparty and their healthcare and health service policies between the years of 2002 and 2010.The main purpose of this study is to examine the truthfulness in the common perception thatthe Swedish moderate party and the Swedish social democratic party are increasingly sharingthe same political views - particularly between the years of 2002 and 2010. The main researchquestion is:?Did the Swedish Moderate party and the Swedish Social Democratic partyideologically position themselves closer in the year of 2002 than they did in 2010within the health care policy area?The research design chosen for this study can be labelled as a comparative case study wherethe two political parties party programs and election manifestos that were current in the yearof 2002 and 2010 are studied. This is done to give a better view of ideological change.

Uppsalahem is the leading housing corporation in Uppsala with its over 160 real estate properties. Uppsalahem is owned by the municipality of Uppsala, which has a climate and energy goal that aims for 100 MW of solar energy to be installed in Uppsala by 2030. The 100 MW goal, combined with Uppsalahem?s environmental policy, is a strong incentive to investigate the possibility of installing PV modules on the many available roof areas that Uppsalahem possesses. The objective of this thesis is to create a foundation for future decisions regarding PV systems for Uppsalahem.

Applicering av överlast på kalkcementförstärkta jordar är ofta förekommande idag, forskning indikerar dock på att överlasten här, inte ger samma effekt som på oförstärkta jordar. Med grund i uppmätta värden i fält, visas i denna rapport, sättningsdifferenser mellan att använda överlast jämfört med att endast applicera brukslast. Resultat av analyserna visar på sättningsbeteende observerat i fält. Om erforderlig liggtid för brukslast finns, uppstår endast små sättningsdifferenser mellan att använda överlast eller inte.Genom att utföra sensitivitetsanalys i FEM- programvaran PLAXIS studeras kryputvecklingen i den förstärkta jorden. Effekten av att applicera en överlast visas för krypsättningar över lång tid.Inget resultat från de numeriska FEM- analyserna visade att märkbart gynnsam effekt uppstår på grund av överlastens applicering, med avseende på krypsättningar.De numeriska analyserna utförs i 2 och 3 dimensioner för att belysa effekt av förenkling av ett lastfall som inte uppfyller krav för oförstärkta jordar i plant töjningstillstånd.Utöver detta ges efter en litteraturstudie, förslag på hur vissa indataparametrar kan utvärderas från empiriska relationer.

The milk production per cow has increased considerably during the last 50 years and due to the breeding for higher milk production also brings decreased reproduction efficiency. In a Swedish study 1996 it was shown that on average only half of all estruses were detected. Every time a farmer fails to detect oestrus it costs the farmer about 1200 Swedish crones and the need of means of detecting oestrus is therofore large. With this study we wanted to investigate if heart rate respectively crystallisation of vaginal mucus (arborisation) could be useful means of detecting oestrus. We monitored two oestrus cycles in four heifers.

The purpose of this report is to examine the possibilities to decrease the number of insects and other pathogens in a crop of pak choi (Brassica rapa), grown with different types of cover and living mulches. Included in the report is a study of literature where amongst others, a summary on the vegetable pak choi and theories of living mulches and different kind of covers are to be found. To examine the amount of predators in the field, traps were used. During the autumn 2002 the tests were conducted in Alnarp. The pak choi and the living mulches were planted/sawn at the same time, the different covers were also applied at this time. The total experiment was divided into six different treatments (plus control) of which three were with covers and three were with living mulches. Once a week the number of leaves, the height and damages were read on ten of the plants from each parcel.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

The possibility for plants to utilize phosphorus in soil is a prerequisite for conducting agricultural production, both small scale and professional. Spreading of phosphorus fertilizers and manure is therefore seen as a necessity in today's agriculture in order to achieve high yield. Manure management, livestock farming and manure storage could contribute to the eutrophication of lakes and rivers. For instance, when the ground becomes saturated, phosphorus leakage could be seen in surface runoff or in point sources resulting from inadequate manure storage management.In the municipality of Växjö there is still many bodies of water that do not reach the Swedish environmental water quality standard of "good ecological status". This thesis has therefore analyzed the manure management and storage on agricultural farms which may have contributed to eutrophication in the municipality.The method for this thesis was a literature study, a questionnaire survey with 820 receivers and a summary of issued inspection reports from 2013.The results highlight the ways in which agriculture may have contributed to the eutrophication of lakes and streams in the municipality of Växjö.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

The knowledge of value-enhancing factors in condominiums is very important for real estate agents when valuing condominiums, but it is also of interest to the owner for an upcoming renovation and sale. Previous research has sorted out the most fundamental factors affecting value of condominiums such as location size, age and condition.The purpose of this paper is by consumer?s actual preferences regarding various attributes identify the most value-adding factors in condominiums. Thereby we want to add and nuance previous research.This has been done through a quantitative method in which possible buyers have ranked how various attributes affect their willingness to pay. The results were analyzed and the median of the various attributes have been recognized.The result shows in accordance with previous research that the location is the primary value-adding factor.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed multi-storey residential buildings.

This diploma work has been carried out in collaboration with the building contractor Sh Bygg Fastighetsutveckling AB in Uppsala with the intention to investigate how the height of a building affects various energy aspects such as transmission losses, infiltration, and the specific energy usage. Three different reference objects have been studied. The reference objects have been simulated for four different heights in the calculation program VIP-Energy.The results show that an increase in floor number can lead to both advantages and disadvantages. As the number of floors increases, transmission losses per square meter floor area decreases. However, as the height of the building increases, the reduction rate decreases.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.