The aim of the study was to map the extent of Fe, Cu, Pb, As, Zn and S contamination in the area surrounding the Nasa silver mine. The mine operated between 1635 and 1810 with some prospecting performed in 1889, and has become infamous for the gruesome ways that the indigenous people were treated during the early years of operation. This study tested three hypotheses through a geochemical survey: 1) sulfide oxidation is still active in the abandoned mine, 2) the soil downslope of the mine is contaminated by mine drainage, and 3) the stream downslope of the mine is affected in the same way. All three hypotheses were valid, as the results showed that still, >200 years after mining operations ceased, signs of the historical mining are clearly visible in the surrounding environment. Acidic conditions were discovered in surface waters close to the waste rock piles, which indicates active sulfide oxidation.

Delineation of recharge areas for aquifers is performed in the groundwater mapping process at the Swedish geological survey, SGU. This work is time consuming and performed manually. It is therefore desirable to develop a more general and repeatable method for defining recharge areas for aquifers.The purpose of this study was to investigate two other possible methods to delineate recharge areas for aquifers. The first method was to examine the possibility of using the topography of the bedrock to define the recharge areas for aquifers. To enable this, a method for generating the topography of the bedrock was developed.

How accessible is the city? Is there more factors than merely the strictly physical that affect how accessible the city is perceived? These questions are the starting point of this study. The greatest emphasis, in this study, is placed on the perceived parameters that affect us humans when we move in our cities. Experiences and internal images can change our behaviour and prevent free movement in the city. The result from this study shows that a city can not be seen as fully accessible unless both the physical and the perceived accessibility are fulfilled.

The prevailing food and energy crisis of the world, due to the declining reserves of fossil energy and a never ending rise of consumption, forces us to look into new fields to supply our energy demand. The boom of bio energy is criticized, as food crops are used to provide biodiesel and ethanol and the volumes are ridiculously small to supply world demand. Algae are one of the world?s oldest life forms and exist in many different phyla, providing a great variety to choose from, for different purposes. Cultivating microalgae offer a way to produce energy at great volumes without competing with food production and at the same time the algae offer a way to use our expensive nutrients in a more efficient way, besides this the algae are carbon dioxide neutral since their carbon source can be supplied by the atmosphere and the additional energy required can be supplied by algal oil or other renewable sources.

During installation and operation of a geothermal heat pump system leakage of an antifreezing agent can appear in a borehole and leak out in surrounding groundwater. To guarantee high quality drinking water for generations to come Sweden has dedicated some areas as water protection areas. The local authority gives permits for the installation of heat pump systems within water protection areas. Before giving a permit the local authority makes an evaluation of the risks involved in installation and operation of the system within the area. By keeping a certain distance between the protected object in the area and the heat pump system the risk of polluting the protected object with an anti-freezing agent can be reduced.This thesis makes a comparison between three different methods of calculating an appropriate distance between the protected object and the heat pump system.

Overdue cleanings have for a long time been an important topic of discussion within the forestry sector. When stands that have not been pre-commercially thinned are reaching the level of commercial thinning, many problems occur in terms of decision-making and economical outcomes. These types of stands are commonly known as conflict-stands. The work was carried out partly as an interview survey towards representatives from the forest sector and the energy sector, partly as a case study of conflict-stands situated in Böksholm, north of Växjö and in Tönnersjö east of Halmstad. The criteria for the studied stands were that they had to be dominated by Norway spruce and be in a severe status of ?conflict?. The aim of the interview was to get an overview of the situation today, and also analyse trends in terms of conflict stands.

The modern veterinarian in horse practice is often consulted by horse owners concerning riding problems. These problems are more complex and show other characteristics than traditional lameness. For the diagnostic process and to give adequate advice the veterinarians need an understanding of riding terminology and problems related to riding. It is also of high importance that riders, trainers and veterinarians increase the knowledge of equine biomechanics and how these are influenced by the rider. Collection is an important concept in the riding terminology.

The prevailing food and energy crisis of the world, due to the declining reserves of fossil energy and a never ending rise of consumption, forces us to look into new fields to supply our energy demand. The boom of bio energy is criticized, as food crops are used to provide biodiesel and ethanol and the volumes are ridiculously small to supply world demand. Algae are one of the world?s oldest life forms and exist in many different phyla, providing a great variety to choose from, for different purposes. Cultivating microalgae offer a way to produce energy at great volumes without competing with food production and at the same time the algae offer a way to use our expensive nutrients in a more efficient way, besides this the algae are carbon dioxide neutral since their carbon source can be supplied by the atmosphere and the additional energy required can be supplied by algal oil or other renewable sources.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses.As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

Preservation of cells and tissues by freezing at temperatures below 70°C has led to new possibilities for the storage of germ cells for fertility preservation. During the freezing process problems might occur, the greatest being ice crystallization which can cause membrane destruction and thus cell death. To minimize this risk, solutions that reduce the freezing point can be added to reduce crystallization and increase survival rates. These solutions are called cryoprotectants. The best method for freezing is still not known.The aim of this study was to analyze the effect of various parameters on the survival rate of human semen frozen with liquid nitrogen.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

The research group Soil and Water Management at the department of Soil and Environment at theSwedish University of Agricultural Sciences in Uppsala are studying greenhouse gas emissions fromcultivated peat soils. To measure carbon dioxide emissions from peat soils in the field the researchgroup are now using two portable carbon dioxide meters (Vaisala GMP343). For practical reasons,they plan to acquire a new type of automated field meter. The aim of this study is to evaluate thepresent meters to see how environmental conditions and instrument settings affect the results,which is meant to facilitate the introduction of the new field meter when the meters needs to becompared. As a part of the study the relationship between groundwater level and carbon dioxideemissions from peat soils will be investigated.The evaluation of the two carbon dioxide meters was made by connecting them to one single airtightsystem, with the aim of creating identical measurement environments.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

Chlorinated solvents are common contaminants in soil and water. Under anaerobic conditions microbes are capable of transforming chlorinated solvents into ethylene which would result in a remediation of the contaminated area. In order to use natural attenuation as a remediation method evidence of continuous degradation is required. Furthermore, the degradation must occur at a sufficient rate and continuous monitoring of the site is needed until the demanded levels are achieved. A field study was performed on the basis of data from a dry-cleaning facility contaminated mainly by perchloroethylene.