Erasteel Kloster AB Söderfors have been commissioned by the county administrative board in Uppsala län to make an inventory of possible contaminations in theirs industrial- and landfill areas on the basis of the Swedish Environmental Protection Agency?s; ?Method of Surveying Contaminated Sites-phase 1? (MIFO-fas 1). The inventory starts with maps and archive studies, place visits and interviews, and finally a risk classification is done. A risk classification is a compilation of four categories; pollutant toxicity, contamination level, possible spreading condition of the pollutant, sensitivity and protection value of the environment. In this paper five partial areas (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin, Östra verken and Myrområdet) have been described from a historical point of view. Only parts of four areas have been risk classified (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin and Östra verken), due to that the other areas isn?t own by Erasteel Kloster AB. Holmen- and Jörsöområdet Holmen- and Jörsöområdet have during the entire activity time been carried out as the production core in the company.

Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

Eutrophication of the Baltic Sea is a serious problem. A major contributing factor is diffuse losses of phosphorus (P) from agricultural land in surrounding countries. In order to estimate P losses, environmental monitoring of small agriculture-dominated catchments is being carried out in most of these countries. Evaluation of the risk of P leaching to waters is usually based on chemical tests originally developed to quantify the amount of soil P available for plant production. The tests are performed in different ways in the different countries and a number of different extraction agents are in use.

In order to reduce greenhouse gas emissions from human activities fossil fuels will have to be replaced with renewable energy alternatives, such as bioenergy. Sweden has a great potential to produce bioenergy derived from forest products and there is currently a great interest within Sweden in using stumps for bioenergy production. However, the environmental consequences of the method need to be investigated before stump removal can be performed on a large scale. Swedish forest soils contain large carbon pools and a different land use may change conditions so that soils that presently act as sinks of carbon could potentially turn into sources of carbon release instead. This study investigates the initial effects of stump harvesting on the emissions of three greenhouse gases, carbon dioxide, methane and nitrous oxide. The emissions were measured from the soil surface in a Norway spruce forest located in the southern part of Sweden.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

This thesis deals with numerical simulation of earth pressure against tubular bridges in the software Plaxis. Plaxis is a FEM (Finite Element Method) software based on numerical calculations for which approximate solutions are developed through an iterative process. The program is specifically designed for soil and rock mechanical tests, such as voltage and deformation calculations in soil.The Royal Institute of Technology conducted in 2005, field tests on tubular bridges of corrugated steel, which was part of Ersa Bayoglu Fleners PhD (Bayoglu Flener, 2009). She studied how two different tubular bridges deformed during installation and filling. Tests and measurements were made during filling.

Better, more efficient fertilizers with great productivity and economic returns are needed, but it is important today to find fertilizers that are also sustainable. It is also important to carefully monitor their impact on the environment, including potential side-effects. In this context, the microbial communities that carry out numerous essential functions contributing to a functional ecosystem are of particular interest. The present study is a complement to a pot experiment that investigated the potential of different waste products for use as fertilizers and how they affect the microbial community. In the pot experiment, the clearest treatment change in microorganism community function was found in the fully fertilized treatment used as a positive control. The question was whether this was indirect, i.e.

Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

The aim with this thesis is to make a comparison between forcing tulips in a hydroponic system and the forcing off tulips that have been planted in soil. The results are mostly based on interviews with six Dutch and one Swedish tulip forcer and the managing director at the Horticultural Research Centre, Proeftuin Zwaagdijke, in the Netherlands. There are benefits and disadvantages with both methods. Tulip bulbs planted in soil seem to get a brighter colour after forcing, compared with those forced ?in water?.

The purpose of this study was to build a database for point-bearing piles in dense noncohesive soil, predominantly moraine. Further, the database was analysed and areas with difficult geotechnical conditions was identified.The database includes for point-bearing piles driven to refusal in moraine. Piles with mainly shaft friction have been excluded. Only concrete piles have been included. Geographically the database covers almost all geotechnical conditions of Sweden.

In a column experiment the effect of three different biochars on nitrous gas emissions, nitrogenretention and water filled pore space (WFPS) were studied in a Swedish sandy soil, classified as aCryopsamment. Ammonium retention was positively correlated, while KCl-extractable ammoniumwas negatively correlated, with the specific area of the biochars. The question was raised whether thenegative correlation between extractable ammonium and biochar specific area reflects the amount ofammonium present in the soil or its extractability from the biochar, and whether methods forextracting soil mineral nitrogen, like KCl-extractions, have to be modified for application on biocharamended soils. There was a tendency of increased nitrate retention and KCl-extractable nitrate withbiochar and KCl-extractable nitrate was positively correlated with the specific area of the biochar. pHwas higher for all biochars compared with control, although the differences were not significant, andWFPS was lowered by biochar addition, significantly in one case.

This study investigated potato growing in beds as an alternative to conventional ridges.It was based on results from field trials on bed-grown potatoes carried out by Halland Rural Economy and Agricultural Society in 2007, studies of literature and interviews with farmers with experience of bed growing of potatoes. Due to their shallow root system, potatoes are one of the most drought-sensitive crops. Potatoes are often grown on sandy soils with poor water-holding capacity. Factors such as total yield, tuber size distribution and quality defects are negatively affected when water becomes insufficient. Wide beds have a more flat top which leads to more uniform water infiltration. Further on, beds have lower soil surface area due to its shape, and therefore, retain water more efficient. In the field trials, which were carried out at the Stjärnarp Estate near Halmstad, potatoes were grown in beds alongside a conventional ridge-grown crop.

In 1994 a new Forestry Act was accepted in Sweden. One of the aims of the law is to raise consideration forpreservation of biodiversity. Since the new law got accepted and some time has passed, there now lie someinterest in examining whether the law has been effective towards its purpose. Methods suitable for analysishave been examined during this study. The content of this pilot study is based around five parameters whichcan be used to validate the effects of the new law.