The exclusion of visually impaired from the information flow presented to us through signs was what led me into this project. With a growing amount of information being presented to us on signs and digital information surface the need of communicating this information in a way that could be read by visually impaired is evident. Looking into different ways of communication, my goal was to create something that filled the need of the visually impaired without branding them as disabled. Having a close relative with bad eyesight is became evident on how much it limited her in her everyday life, not being able to navigate herself without the support of her husband. Through interviews with her and others with varying diagnoses I reached an insight in their situation. To my surprise they still favored a visual form of communication before an auditory or tactile form, because it?s easy to survey and quick to interpret.

In visual programming the developer specifies her code, using visual tools. Within the range of visual programming languages lay icon-based languages, form-based languages, and diagram languages.Mediator is a multimedia authoring tool that allows the user to create interactive CD-ROM presentations, dynamic HTML pages and Flash projects, without any coding or scripting. The user can create interactivity in her project, using event driven and icon-based visual programming, through a ?drag and drop? user interface. This report intends to determine some of the qualifications of a tool of this kind, as well as its limitations.The report is based on a case study, in which a smaller software application was to be updated using Mediator 9.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

Vårterminen 2006.

In February 2002 the European commission put forward a proposal for a new directive on The patentability of computer-implemented inventions, but which during my work on this essay has not been decided on yet. The directive has divided the decision-makers in the union, the commission and parliament, into two different positions regarding by which range computer-implemented inventions should be patentable. The parliament has amended the commissions proposal in a substantial way and the legal process has caused a heated debate both within the unions administration and among various interest groups both in favour of and against a patent on computer-implemented inventions. The loudest protests have come from a group that feels threatened by a possible software patent: Open Source. In this study I examine both the arguments by the decision-makers and by the lobbying for and against the proposal.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

The purpose of this essey is through empirical methods investigate usability factors on Video On Demand applications for the Internet. More specificly we will focus on a application called Voddler. The purpose is to identify usability problems that exist in Voddler, and present the reader with suggestions on possible solutions. This could be used as guidelines to how to design for usability in this kind of system. We will use an online survey to investigate Voddler usability and use this data as a basis for our analysis.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

Since the demands from authorities regarding lower energy consumption havebecome increasingly strict, this puts new pressure on designers and builders, who notonly have to ensure an esthetically pleasing building, but also make sure it issufficiently efficient to pass under new laws and regulations.This thesis takes into consideration a wide range of various parameters and theireffect on a building?s energy consumption. For this evaluation a computer softwarecomparison between the two programs Autodesk Ecotect Analysis and AutodeskProject Vasari was performed.Autodesk Ecotect Analysis is better suited for studies made on individual factors whileAutodesk Project Vasari is better used in experiments regarding the geometricalshape of the stucture itself.The results from the two different software tools used, give us both differences andsimilarities. For instance, both software programs produced the same resultsregarding the importance of the windows of the buildings to ensure a highly energyefficient building, both when it comes to the windows size and their U-value..

Objective: The study will investigate whether cash liquidity have a negative affect on profitability and share value of companies, listed on Nasdaq OMX Stockholm 2008-2011. Part of the purpose is also to show if the industry risk is of importance for treasury management of these companies.Method: The methodology for the study is key analysis through hypothesis testing and regression analysisConclusion: The liquidity ratio affects profitability in a negative direction on the entire sample. No other conclusion can be drawn..

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.