The EU Water Framework Directive has led that management follows the boundaries of natural catchments.The Swedish waters suffer from a nutrient overload that originates mainly from diffuse sources such as agriculture and the subcatchment of Hackstabäcken in Vallentuna Kommun, just north of Stockholm, has been chosen for this study because of its high nutrient load and because it has undergone obvious changes in land use through the years.In this study, the land use in 1902 is compared with the land use in 2011 in order to investigate if it has influenced the ability of the landscape to produce ecosystem services related to nutrient removal. These services will continue to be produced as long as the system is stable and resilient, but when landuse changes and manure from horses increases it will lead to disturbances that can convert a system from one regime in to a completely different one. That will result in loss, or degradation, of ecosystem services such as denitrification, phosphor sedimentation and adsorption, vegetation uptake and infiltration.The results of this study are based upon area calculations of landuse from old maps from 1902 and 2011. Through these maps it becomes clear that the forests in Hackstabäcken, has increased with 170 ha together with an urbanization of 311 ha, at the same time as wetlands and arable land has diminished and lakes has suffered from reductions. Wetlands have been reduced with 76 ha and the ones remaining are of insufficient quality from a nutrient removal perspective.Data from 1902 and 2011 regarding number of horses and bovines indicated a decrease in bovines and an increase in horses.

An increasing demand for wood products in China has resulted in large areas invested in fast-growing tree plantations of eucalyptus. Eucalyptus plantations are often associated with an intensive management including fertilization. By understanding the effects of fertilization and where in the ecosystem nutrients are accumulated a more sustainable forest management could be achieved. In this study, a nutrient budget including all biomass and soil components was created for Eucalyptus urophylla. The examined nutrients were nitrogen, phosphorus and potassium.

Vårterminen 2006.

In today?s IT world where software is constructed in a rapid pace, testing has become a crucial area to master when testing has to be done at a greater speed. To still be able to handle the demands of high quality software, companies have to spend more resources on testing and introduce test automation. By automating test cases the testers can gain time which they can spend on doing more complex testing and thereby increase the quality of the software.In this thesis we have helped Extenda AB, who delivers systems to retail companies, to introduce test automation in one of their customer specific projects. This has been done using their own in-house ?capture/replay? tool ECP (Extenda Cashier Player).We have also derived a process that explains how Extenda can introduce test automation on other customer projects.

In February 2002 the European commission put forward a proposal for a new directive on The patentability of computer-implemented inventions, but which during my work on this essay has not been decided on yet. The directive has divided the decision-makers in the union, the commission and parliament, into two different positions regarding by which range computer-implemented inventions should be patentable. The parliament has amended the commissions proposal in a substantial way and the legal process has caused a heated debate both within the unions administration and among various interest groups both in favour of and against a patent on computer-implemented inventions. The loudest protests have come from a group that feels threatened by a possible software patent: Open Source. In this study I examine both the arguments by the decision-makers and by the lobbying for and against the proposal.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

The purpose of this essey is through empirical methods investigate usability factors on Video On Demand applications for the Internet. More specificly we will focus on a application called Voddler. The purpose is to identify usability problems that exist in Voddler, and present the reader with suggestions on possible solutions. This could be used as guidelines to how to design for usability in this kind of system. We will use an online survey to investigate Voddler usability and use this data as a basis for our analysis.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

Since the demands from authorities regarding lower energy consumption havebecome increasingly strict, this puts new pressure on designers and builders, who notonly have to ensure an esthetically pleasing building, but also make sure it issufficiently efficient to pass under new laws and regulations.This thesis takes into consideration a wide range of various parameters and theireffect on a building?s energy consumption. For this evaluation a computer softwarecomparison between the two programs Autodesk Ecotect Analysis and AutodeskProject Vasari was performed.Autodesk Ecotect Analysis is better suited for studies made on individual factors whileAutodesk Project Vasari is better used in experiments regarding the geometricalshape of the stucture itself.The results from the two different software tools used, give us both differences andsimilarities. For instance, both software programs produced the same resultsregarding the importance of the windows of the buildings to ensure a highly energyefficient building, both when it comes to the windows size and their U-value..

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

This paper describes the evolutionary development of an information system for a small company. The company performs overhaul of forklifts and cleaning machines. The company has already an information system that handles the reports from these overhauls but it needs a supplementary tool that assist the chief planner to plan forthcoming overhauls.It should be able to display coming overhauls in a timetable and eventually print them, either to a PDF file or to a document. The timetables this function produces will help the chief planner and the assemblers to get a good overview of their day-to-day work.The tool needs to be intelligent in that way that it takes into consideration were in the country different assignments will be performed. So that time consuming travels over great distances can be avoided.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.