This thesis is about adware, which is very popular today. The adwares are used to, among other things, down- and upload files from other users on the Internet. One thing that most users of such programs are not aware of is that many of the adwares contain spyware. These spywares install themselves simultaneously with the adwares. Two of the spyware features is to generate pop-ups in the web browser and to direct advertisment from the users web habits.

Ericsson develops a new stripline directional coupler. Its design is described in appendix B and differs from the directional couplers Ericsson uses in current products. The new directional coupler will be used for transmission power measurement in future UMTS 3G base stations.The most important parts of directional coupler theory are presented. It is necessary to study this theory to understand how the coupler works and how it should be designed to get good performance.Optimal directional coupler termination component values to get high directivity and broad directivity bandwidth have been investigated.The trim screws trim ranges have been studied.A simple analysis of serial production performance when termination component tolerances are taken into consideration has been done.The resistance components reactive (inductive/capacitive) characteristics at 2.14 GHz have been analyzed.The directivity performance limitations of the directional coupler, when Ericsson?s band pass filter is connected, are investigated.Design changes leading to better performance are proposed.

Syftet med denna uppsats är att analysera debatten som tog plats på hemsida Newsmill åren 2010och 2012 om intelligent design. Fokusen i själva textanalysen är en argumentationsanalys somtillsammans med kritisk diskursanalys skall utröna och förstå den maktförskjutning som går attfinna inom diskursen. Den kritiska diskursanalysen är byggd på Norman Fairclough. Analysen ärordnad kronologiskt och innefattar tjugotre artiklar allt som allt.Fokus i själva analysen ligger i att utröna och förstå hur debattörerna ställer sig till religion ochvetenskap i deras argumentation kring intelligent design. Här går att finna hur religion ofta förs insom begrepp i relation till personers emotionella agerande och överlag blir religion en belastning fördebattörerna.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

Denna rapport behandlar examensarbete utfört för industridesignföretaget Cate & Nelson Design. Företaget ligger i Eskilstuna och jobbar i huvudsakligen med möbeldesign och inredningsprodukter. Projektgruppensuppgift har varit att ta fram en ny möbel för företaget och arbetet har omfattat utveckling av hela produkten från idé till prototyp..

The purpose of this project was to find out how reading is affected, and not affected, by different elements on a start page. The site I was studied belongs to the magazine Fitness Magazine, and the current site has a problem. The editorial texts and articles don?t reach out to the visitors. The goal was to make a proposal for a new first page of the web site that highlights the texts and the reading.With the help of interviews, user testing and textual analysis, I studied if the texts were in itself that caused the problem or if it was the design.

This paper aims to investigate whether a small organization with small development teams can find a value in leaving a functioning development process to follow a formal systems development methodology, if these organizations can find support in an agile systems development method and in such case the method needs to be adjusted according to the organizations unique conditions.A traditional plan-driven system development methodology includes a number of phases that are carried out sequentially and a completed phase can basically not be resumed. All requirements are specified at the beginning of a project and at the end of the project only one delivery of software take place. This can cause difficulties in for example dealing with changing requirements. Agile system development methods intend to deal with changing requirements and to enable continuous delivery of valuable, working software.In this paper, both the traditional plan-driven methods and agile methods will be explained. Research methodology and existing system development theories will be discussed and a company where the study has been conducted will be presented.

Hållbarhet är ett begrepp som varje landskapsarkitekt ofrånkomligen tvingas att förhålla sig till. Frågan för denna kandidatuppsats är på vilket sätt det görs. Målet är att undersöka landskapsarkitektens förhållande till och tillämpning av hållbarhet och hållbar design, för att på så sätt bidra till att lyfta en diskussion kring vilken roll landskapsarkitekten spelar inom arbetet för att skapa ett mer hållbart samhälle. Genom granskning och analys av litteratur samt genom en intervju ämnar uppsatsen svara på tre huvudsakliga frågeställningar: den första handlar om begreppet hållbarhet, om hur det uppstått och hur det används inom landskapsarkitekturen; den andra frågeställningen gäller tillämpningen av hållbar design; och den tredje rör värdering och analys av hållbar landskapsarkitektur. I uppsatsen undersöks och beskrivs både metoder för att uppnå hållbarhet, hållbarheten som färdig produkt, samt inställningen inom landskapsarkitekturen till hållbarhet och hållbar design i stort. Resultatet visar på ett komplicerat förhållande, ofta speglat i hållbarhetsbegreppets komplexitet, vilket också i stor utsträckning påverkar tillämpningen av hållbar design inom landskapsarkitekturen och metoder för värdering och analys av hållbarhet. Själva komplexiteten framträder genom uppsatsen som en drivande kraft och öppnar för en fortsatt diskussion kring både utmaningar och möjligheter med tillämpning av hållbar landskapsarkitektur i framtiden..

In the media richness of everyday life, the encounter with information graphics ishappening on a daily basis, whether we are aware or not. With the development andeasy access of technologies, new ways to create and display information graphics hasemerged. Among them, the animated information graphics, which in the few pastyears appears to have increased in popularity on video sharing websites such asVimeo and Youtube. In the genre of animated information graphics, there seems to bean inherent diversity regarding the design characteristics. In this study we exploredliterature and research on information graphics and related subjects.

When several production units provide a district heating network, water is pumped from different directions. When the flows from the plants finally meet in the network, the water can be completely still. These places are called zero flow zones. In district heating networks with several plants, which also have different supply temperatures, large and frequent temperature fluctuations can occur when the zero flow zones move. This may cause wear on the pipes, a phenomenon called low cycle fatigue.For this reason it is important to examine where and when zero flow zones that cause temperature changes occur.

Background: The majority of the occupational accidents and work-related diseases at Swedish workplaces occur due to poor ergonomics during lifts and transportation of objects. The most common consequence of poor ergonomic conditions is low back pain (LBP) and the risk of developing LBP increases as the mechanical loading on the intervertebral disks grows. This study has investigated the biomechanical loading in the low back during two different types of patient lifts. The first lift (lift A) is developed by Modern Arbetsteknik (MA) and the second lift (lift B) is a common lifting technique among care workers. Objectives: The aim of the study was to identify any advantages or disadvantages with MA?s lift, regarding shear and compression forces in the L5/S1 disc.

The purpose of the project was to design a furniture collection that can be packed in flatpackages and be assambled by the buyer. The idea is that the assembling will give the furniturean added value. I have tried to create a collection that is easy to produce so that the productwill be cheap for the consumer.The collections aestethic is inspired by Gothenburgs harbour The wide and bearing elementsof the furniture has set much of its expression.Joints has been highlighted details instead of being hidden..

The health care sector is one of the most information-intensive institutions in Sweden. Big investments in information technology have been made to ensure efficiency and quality within organisations in health care. This has led to high requirements in documentation and resulted in an increase in administration which gradually more often is done by nurses and doctors. A major problem is that it is difficult to gain access to the information recorded in all the different systems, which is their objective. This causes double documentation instead of being a support in follow-up performance.

This report describes how the process has evolved during the creation of a new web page forthe company Scandinavian Travel Agent DMC. The design methods that have been used aredescribed and also how parts of the webpage have been created by using the design methodresults. Our reflections around design and functionality are explained and how usability hasbeen our main focus during the master thesis. We also describe how it has been to work withan external costumer and how the tasks constantly have changed and been added as theprocess has continued.The background to this work is that AB Scandinavian Travel Agent DMC need to improve theircurrent web page. This to give the clients better needed information about destinations, butalso to stand out in the competitive travel business.

The purpose with this final thesis has been to study the aesthetics and design of roundabouts and to ascertain important factors that influence the experience of them. The investigation was carried out through literature-, field studies and interviews with persons that in different ways have participated in the formation of roundabouts. Furthermore, six roundabouts have been explored in more depth so that the survey would get a more practical link. These six roundabouts all occur in the rim of a city and do thereby have an important role as a gateway. The environments in such contexts are often complex which adds additional difficulty in achieving a visually appealing design, especially when taking into account the usually high traffic intensity.