ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.

Dagdrömmar är en tapetkollektion bestående av tre fondtapeter som kombinerar det moderna, massproducerade digitaltrycket med traditionell, unik broderiteknik. Genom att tillföra handbroderi och dess struktur och textila känsla till ett digitaltryckt tapetmaterial skapas en kollektion som befinner sig i gränslandet mellan design och konst, lyx och budget samt dröm och verklighet.Daydreams is a wallpaper collection consisting of three images that combines the modern, mass-produced digital printing techniques with traditional, unique needlework. By applying embroidery ? with its structure and fabric texture ? to a digitally printed wallpaper material, a collection is created that lingers on the borders between art and design, luxury and modesty as well as dream and reality..

The aim of this thesis was to investigate the accessibility and activities for dyslectic adults in public libraries in the Swedish county of Södermanland. The questions that were to be answered were four; to what extent do the libraries provide book material and special computer software? To what extent do activities occur? Does the library staff have awareness and knowledge of dyslexia and of activities for dyslectics? What are the obstacles for good service for dyslectic library users? Two methods were used. As a first step, a questionnaire was sent to thirty public libraries. The questionnaire elicited a low level of response, but gave in spite of this an overview of the situation for dyslectics in the libraries of the county.

The aim of this study was to investigate the individual meaning of experiences of migration and day-to day life experiences before and after migration, of women that had migrated from the Middle-east area to Sweden. This was to be done with a psychological health perspective looking for stressors and salutogenic factors. A phenomenological approach was used. Eleven women where interviewed with three open questions on a trajectory theme. The analysis was supported by software Sphinx Lexica and software MCA-Minerva.

Många människor lider av kognitiva funktionsnedsättningar. Det kan försämraförmågan att använda teknik och leda till att människor går miste om många verktyg och funktionersom andra tar för givet. Att ta hänsyn till kognitiva funktionsnedsättningar i utvecklingen avmobilapplikationer är utmanande då vissa gränssnitt och funktioner kan upplevas som för kompliceradeeller ostrukturerade. I denna uppsats presenteras designmönster som kan bidra till en inkluderandedesign enligt konceptet Design för alla. Design för alla innebär design som möjliggör användande föralla människor.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 22,5 hp, 2014.

This degree project is a realization of a strategy for collaboration between an industrial designer and employed workmen of a producing company. The collaboration aims to engage everyone involved in the co-authorship of a products design and manufacturing history. The realization has taken place in an open dialogue where the designer no longer owns the design process by himself. The project has been carried out in cooperation with the company Iris Hantverk. The company is owned by the Swedish body for visually impaired and has their main production facility in Stockholm.

The aim of this thesis is to establish a ?förvaltningsplans? template to Fastighetskontoret in Vasteras city. Further general information about the mission was given at our first meeting with Rolf Haraldsson, who happened to be our mentor and works at Fastighetskontoret in Vasteras city.We agreed that using the software Excel was the most appropriate way to establish the template, because Fastighetskontoret also make use of Excel in their internal system, and also because Excel has a more friendly user interface and it is more easier to use compared to other software that have complex templates.One of the first things we did was to get in contact with different fastighetskontors around Sweden so that we could either take part of their ?förvaltningsplaner? or get referred to other material that could have been used. But this turned out to be an unsuccessful strategy.

Http : // en.wikipedia.org / wiki / Life is a book with a life of its own. It is made to raise questions about the importance of the book, and the paper book in particular. It is a design project in which a new design method is being tested and evaluated. The intention of the project is to determine whether a concept can be found and evolved from a chosen subject or not. The aim of the book project is also to investigate if the form and content of the book could be entwined, making it impossible to separate them from each other..

This is a study of how emotional engagement can be measured and be taken into account in the development of websites. We believe that emotions become relevant only when viewed in correlation to how users experiencing a webpage. In this study, we developed a tool for use together with user tests where the information about the user's emotional engagement can add new value to the evaluation. The tool allows the user to mark, on the website, his/her emotions and level of engagement represented by colored circles, generating quantiative data on how users feel about the website. The tool is part of a method for evaluating the emotional engagement that we have developed which consists of user testing supported by the tool and accompanied by interviews..

This report describes how we, with support from SYSteam Datakonsult AB Värnamobuilds a dynamic website for a fictional company. The purpose of this work is to tietogether our studies with the businesses in the region, and expand our knowledge.Together with Peter Bäckrud from SYSteam we worked out the goals to achieve thispurpose. The goals are to create a polished intranet to a company with the webpagepublishing tool EPIserverThis report begins with describing the goals and visions that were set up. Then follows athorough theoretical background that describes the areas we have touched, to give thereader an idea about the work. The report then moves into the creation phase that talksabout the problem that occurred during development.The creation phase is split up into two parts where the first part gives a good descriptionabout how we designed a usability friendly website that would fulfill the goals we had setup.

Denna uppsats avser att belysa frågan varför prototyper är ett viktigt verktyg i en utvecklingsprocess av ett mobilt system. Fördelar och nackdelar som verktyget kan innebära behandlas och olika tillvägagångssätt beskrivs. Arbetet med detta baseras i ett praktiskt utvecklingsprojekt på IT-kunsultföretaget Citerus. Projektuppgiften var där att genom en informationflödesanalys definiera olika flaskhalsar i informationsflödet på olika hotell för att sedan föreslå ett effektiviserande system. Projektet koncentrerades vidare på städpersonalen och deras arbete. Utifrån fortsatta studier föreslogs ett mobilt system som ger städpersonalen information för att lättare och effektivare göra sitt jobb. I flera olika forskningsdiscipliner som berör design och systemutveckling förespråkas ett utvecklingssätt med hjälp av prototyper.

The purpose of this master thesis has been to find different solutions to the design of a headlamp with a cluster of three or possibly four high power LEDs (Light Emitting Diodes). During the work, two different problems have been considered; how to design a lens in order to shape the light beam in a desirable way, and how to design a cooling system which will lower the temperature of the LEDs as efficiently as possible, still taking into account the geometry set by the optical solution as well as other given geometries. The results presented in this thesis are partly the outcome of a literature study, but derive mainly from a number of tests and measurements made on two test rigs and one concept prototype..

Visual Type Instrument - VTI, is a tool containing a typeface and a set of geometric calculations that generates numerical data in spreadsheets. The data is determined from the typefaces visual dimensions and is used to calculate leading, type size, margins and format. The aim is to offer, for all of those working with typography and design, a practical way to manage text, image and format in relationship to visual size. Instead of using point measurements, VTI uses a new device called Edo. An Edo is the same as one twelfth of a millimetre.