This paper aims to explore the phenomenon urban wind energy, its visual effect on built environment and the factors that affect the opinion towards new elements in the city. A place study of the city Gävle serves as a complement to the theoretical part of the paper. The theoretical discussion opens with an account for the technical and economical conditions of urban wind energy. It presents the technical basics, different types of turbines and a discussion occurring wind related techniques in built environment. Today, the knowledge of how the wind moves and acts in the rural landscape is quite good.

The purpose of this thesis is to study how swedishness is constructed and narrated in two Swedish documentary series that picture the Swedish participation in the international ISAF mission in Afghanistan. The main focus lies on how the Swedish soldier as such is portrayed, on which values, characteristics and qualities that they are said to embody and how these are linked to notions of swedishness, particularly the strong historical narrative, formed during the second half of the twentieth century, that defines Sweden as a peaceful, neutral and humanitarian state, with peaceful, enlightened and democratically minded citizens. Theoretically it draws on the concept of metanarrative to explain how ideas of shared national origin translates in to a broad organizing discourse, that defines, interprets and communicates notions of what it means to be a Swede and what is needed to make claims on swedishness. Another concept, that of national bodyscape, is also used to further define and explain how ideas of nationality are embodied and take the form of specific characteristics and  personal qualities. The meaning-making in these two series makes use of the above mentioned definition of swedishness as defined by humanitarian concerns, democratic ideals and moral superiority to construct an image of the Swedish soldiers as on the one hand soft, humanitarians, who are needed in Afghanistan because of their especially strong sense of justice and moral, and, on the other, as tough soldiers, who are able to participate in every aspect of the war as fighters.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Recent changes in Swedish law suggest new groups of ?desired? labor migrants, which international students is an example of. Despite this, international students in Sweden have received little previous attention in the literature. The current study focused on international master students? experiences of job searching in Sweden and challenges they face in job searching, recruitment, and workplaces.

Under 2010-2011 genomfördes ett projektarbete hos företaget Bioservo för att undersöka huruvida ett tilltänkt hjälpmedel för droppfot var lämpligt. Droppfot är en relativt vanlig åkomma där den drabbade patienten helt eller delvis saknar förmåga att dorsalflektera, d.v.s. vinkla upp, en eller båda fötterna. Bioservo ville ha svar på vilka krav som ställs på ett sådant hjälpmedel, om det var möjligt att konstruera ett hjälpmedel utefter deras designlösningar samt om det fanns utrymme på marknaden för hjälpmedlet.Denna rapport avser att presentera resultaten av den bakgrundsstudie som genomfördes, den prototyp som byggdes och de resultat som erhölls.Det tilltänkta hjälpmedlet skulle ha aktiv styrning och använda Bioservos patenterade Soft Extra Muscle-system (SEM) som kraftöverföring. SEM-systemet består i tunna vajrar som leds utmed en befintlig kroppsdel och fungerar på samma sätt som kroppens egna senor.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Nowadays, packaging design is seen as a competitive tool and its importance for corporations is becoming increasingly apparent. The rivalry within homogeneous markets puts high demands on differentiation and the ability to create something more than the product itself. With this fundamental question, the soft drink industry has been examined and a case study of the brand Coca-Cola has been performed. The aim is to investigate how packaging design is used as a tool for strengthening a brand and to explore which additional values this contributes. In addition, the study observes the most important factors in the development of packaging design.A theoretical work of reference, consisting primarily of theories related to branding, design development and visual identity, has been developed to support the study.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Man började skära med vatten i USA för över 30 år sedan. Något senare kom idén att blanda tillabrasiv tillsats i form av sand vilket gjorde det möjligt att skära i hårdare material. Tekniken ärunder ständig utveckling och efterfrågan på möjligheten att vinkla skärhuvudet har på senare årökat.Vid skärning med munstycket och jetstrålen vinkelrät mot bearbetningsytan skapas ett litetvinkelfel vilket medför att snittytan blir konisk. Munstycket kan då vinklas för att kompenseradetta fel, så kallad vinkelkompensering. Munstycket kan också vinklas för fasning av detaljervilket är vanligt i samband med beredning före svetsning, så kallad fasning.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

A reward cycle for investigating the emotional status in animals has been developed and it requires that animals go through three main phases, i.e. anticipation, consumption and relaxation. The reward cycle has not been tested previously for access to play in pigs. Therefore, the aim of this Master thesis was to investigate if growing pigs showed more behaviours indicative of excitement than pigs that were not allowed to play, performed play in a play arena and showed more behaviours indicative of relaxation after play when they were back to their home pen than pigs that were in their home pen the whole time. Forty undocked piglets (10 litters of Specific Pathogen Free half pure-bred Yorkshire and half hybrids of Yorkshire x Landrace balanced for breed between two treatments were used.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.