Increased interest in nature tourism may be what saves small and dying villages, like Borgsjo? in the county of Va?sterbotten in northern Sweden, from disappearing. The nearly untouched nature in these areas is in many cases an unused resource, since true wildlife experiences are sought by many travelers. The purpose with this report is to investigate if Borgsjo? has the potential and abilities to become a destination for nature tourists, and how this should be done to avoid negative effects on nature, wildlife and culture.

The report is part of the university´engineer program within Industrial Organization and Economics with specialization in Logistics and Managment at Jönköping´s university.Skoghall´s mill underlies a large supply chain, which means there should be a lot of areas in need of small improvement measures. This report illustrates a small part of one of these areas and is focused on the loading distribution services in the terminal Vänern.At the moment there´s a very unequal load of the load carriers SECU box and Container at the terminal. Skoghall´s mill has the desire to equalize the high and low load levels of the 2 loading carriers named previously. One of the options to solve the problem is to set a limit of how much the carriers can load per week or per day. The mill also wants it to be investigated if the proposition would influence the customers in any way and if both the company and its customers could handle a lower level of delivery services in case the proposition was to be applied.The goal to be achieved with this thesis is to provide balance to the unequall loading of the 2 load carriers, SECU and Container, and investigate whether or not the Skoghall´s mill´s customers, could manage the lower degree of delivery service that the proposition would imply.For this goal to be achieved, random sample investigations were taken from orders of a customer that is provided with SECU load carriers and the same was made with a Container´s customer.

Urban forests are important for people to get at break and be able to relax in a stressful world. Several studies show that we feel better through being out in the forest and historically this was the normal environment for us. As a result of population growth and urbanization we tend to spend less time in nature nowadays than before. Due to this development urban forests have become a central role in our society as a place where people can fulfill their needs and interests. The management of the urban forest is therefore important, especially for municipalities that own forest which is supposed to be of benefit to local residents.Falköpings municipality owns approximately 260 hectares of forest in the popular and most visited recreational area along Mösseberg?s southern slope.

Syftet med denna studie var att undersöka förekomsten av självskadebeteende hos tonåringar, om detta skiljer sig åt mellan könen och om samband kan uppvisas med självkänsla och mindfulness.128 elever i årskurs nio från tre skolor besvarade frågeformulären Deliberate Self-Harm Inventory, Rosenberg Self-Esteem Scale samt Mindful Attention Awareness Scale.Resultaten visade att 65,9 procent av deltagarna skadat sig själva vid åtminstone ett tillfälle, och 41,4 procent vid flera tillfällen. Det förekommer ingen signifikant skillnad mellan könen. Hos flickorna korrelerar självskadebeteende med låg självkänsla och låg grad av mindfulness. Pojkar som skadat sig själva många gånger uppvisar lägre grad av mindfulness än övriga pojkar. Resultaten indikerar att det troligtvis finns flera olika anledningar till att ungdomar skadar sig själva..

The Sheep is the oldest livestock, and has been in Sweden for 4-5000 years. Thanks to that you can obtain skin, as well wool and meat. Therefore it was an important animal. Sheep production has increased, strongly lately due to the pasture support. The purpose of this paper is to find out what kind of different EU-subsidies you can get and to compare the subsidies in Öland and the main land. Sheeps are very good conservationist with grass, bushes and herbs, because of different grazing lands hardness and growth is it important to control the pasturage strain. A good way to regulate this is to have different enclosed pasture to switch between. I have been studying the different EU-subsidies.

Farmers are constantly facing changes, and the exposure to risk requires monitoring these changes. Financial risks, institutional risks, market risks and production risks are the different risk categories that the farmers face. Production risks stems from factors the farmer cannot affect or is beyond his control. The crop?s output is the basis for the primary income of agricultural operations, which is why it is important for farmer to manage their production risk. A tool to reduce the consequences of production risks is crop insurance.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

This master thesis was written for Arla Foods and the result of the thesisserves to gain Arla Foods in its work with chemical hazardous and to bringnew academic results. The thesis aims to create a common methodology forrisk analysis with the handling of chemicals.The theories displayed in this thesis focuses on different risk managementmethods in order to build up a framework out of which a risk management toolwas created. The main primary data source consists of interviews held withemployees within Arla Foods at different facilities.The risk management tool can be found in appendix K.Available recommendations for how to evaluate risks with chemicals can befound at appropriate government agencies. These recommendations aredrawn up to suite small and medium enterprises and therefore are to narrowto make a good foundation for analysing chemical risks at large companies.With the legislation and government demands in mind, a tool has beencreated to fit a large company?s needs when managing chemical risks.

Pulp- and papermills expend vast amounts of water in order to produce pulp, paper and cardboard. Hence, they alsocreate vast amounts of waste water which has to be cleaned before it can be released into the receiving body of water. Insuch a wastewater treatment plant, tremendous amounts of energy are expended by the aeration in the biologicalcleaning process. This aeration is necessary to supply the microorganisms that shall decompose organic material withoxygen, which they need for their metabolism. The transfer of oxygen from the gas phase to the liquid phase isprimarily inhibited by surface-active substances in the waste water like resin acids or fatty acids.

Tourism has been an expanding market since the first travel agency started in the middle of the 18?Th century, and today it is a global industry, with intensified competition and high demands from the customers. Product development is therefore one of the most important aspects for successful companies, and scientists also agree that the first stages in product development are the most critical. This essay is focusing on those stages, regarding product development on travel agencies, and the research question is as follows: How are new tourism destinations developed and what is the difference in working process between small and big travel agencies? The empirical research consists of qualitative semi-structured interviews with two big and two small travel agencies.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

This paper sets out to examine to what extent French grammar teaching contributes to the students? practical, oral skills. Are the students familiar with the grammatical system without knowing how to apply it orally in practice? The paper contains a theoretical background and an empirical survey. One quantitative and one qualitative method have been applied in the survey.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

Syfte - Syftet med studien är att få en djupare insikt i sambandet mellan ledarskap och de faktorer som bidrar till ökat engagemang hos medarbetarna i arbetet med ständiga förbättringar. Studien riktar sig mot ett mellanstort industriföretag som implementerat lean production.Design/ metod - I vår undersökning valde vi att göra en kvalitativ fallstudie. Data samlades in i ett svenskt industriföretag. Totalt har 7 intervjuer genomförts.Undersökningsresultat - Resultatet vi kom fram till är att medarbetarna är i låg utsträckning delaktiga i förbättringsarbetet. Tidigare forskning visar att medarbetare som är delaktiga i beslut är också mer engagerade i arbetet.Metodkritik ? Resultatet speglar enbart subjektiva bedömningar och de studerade variablerna bygger på respondenternas uppfattningar.