This essay examines pull-out strength of threaded rods fixed into glulam timber. The technology is intended to be used in hidden joints between glulam components. The work began with a study of literature focusing on current research within the topic, mainly to create a base of knowledge before the testing was initiated. Studies of scientific articles reveals a lack of research within this area, which makes it difficult to develop standards and calculation models for these joints. The drill holes in the tests have a diameter of 7 mm.

Background: Acquisitions are a well-known method for increasing company size and strength on the market. But to reach the targets set, more than just a positive economic calculation is required. An atmosphere that supports the company's integration is needed, for which it is of great importance for management to understand the underlying sets of values that exist in the organisation, and to take into consideration the way they might become an obstacle or a tool for a successful integration. Purpose: The purpose of this thesis is to explain and understand how cultural change occurs and how it affects the employee, as a smaller company is bought and integrated into a larger organisation. Procedure: The analysis is based on theories on organisational culture and organisational change.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

Coastal areas are popular for housing, both for permanent living and holiday houses. At the same time, thin sediments and small storage capacity in the bedrock makes the ground water resources limited. The limited ground water resources combined with too large withdrawals of ground water makes salt water intrusion a problem in many coastal areas. This study examine the risk of salt water intrusion in drinking water supplying wells on the island Södra Finnö in S:t Anna archipelago, Östergötland, Sweden. A calculation of the relation between ground water recharge and withdrawal is obtained to analyze the ground water balance in the area.

The subsidiary company of Swedish Match AB called Intermatch Sweden AB has submitted a claim to RegR for them to change the notification of SRN, regarding the company?s settlement of foreign tax. To make the matter clear Intermatch Sweden AB has pointed out that they consider deductions for depreciations not to have an effect on the foreign income when the amount to settle is calculated. The intention with this study is to analyse the legal situation regarding how the level of the settlement is affected by the consolidated costs. Such as additional depreciations regulated in the law ?Settlements of foreign tax?.

At ABB LV Motors in Västerås the shaft is assembled into the rotor with a shrink fit. After athorough investigation of the assembly method, several factors that make the insertion of theshaft more difficult has been discovered. Some affect the assembly directly while others onlyhave an indirect influence. The investigation has shown that the radial play between the shaftsouter radius and the rotors inner radius might be too small which could lead to anunsuccessful assembly. For the larger rotors, the condition is the opposite, and the rotor mightmove compared to the shaft direct after the assembly when the rotor still is warm.

This thesis describes new methods for automatic crack detection in pavements. Cracks in pavements can be used as an early indication for the need of reparation.Automatic crack detection is preferable compared to manual inventory; the repeatability can be better, the inventory can be done at a higher speed and can be done without interruption of the traffic.The automatic and semi-automatic crack detection systems that exist today use Image Analysis methods. There are today powerful methods available in the area of Computer Vision. These methods work in higher dimensions with greater complexity and generate measures of local signal properties, while Image Analyses methods for crack detection use morphological operations on binary images.Methods for digitalizing video data on VHS-cassettes and stitching images from nearby frames have been developed.Four methods for crack detection have been evaluated, and two of them have been used to form a crack detection and classification program implemented in the calculation program Matlab.One image set was used during the implementation and another image set was used for validation. The crack detection system did perform correct detection on 99.2 percent when analysing the images which were used during implementation.

Problems:How would a decision model that takes into account more aspects and dimensions than just the financial aspect look for smaller service compa-nies? What aspects are important to consider in such a decision model?Purpose:The purpose of this master thesis is to develop a decision model based on previous research, to improve decision making in smaller service com-panies ? by considering perspectives that traditional investment calcula-tions ignore.Method:The study was qualitative and was based on both primary and secondary data. As data collection method for the development of the model we used literature search on previous research. The study?s primary data consisted of responses from five smaller service companies.

Länsförsäkringar in Värmland, Sweden, had during the year 2003 a total level of 6.1 percent of people on the sick-list, which was higher than average in the business (4,5%) and for salaried employees in the private sector (3,3%). The average age of those put on sick-list was 47 years, whish is four years higher than the average for the whole LF-group. The cost for the total amount of people being on sick-list at LF-company (6,1%) was estimated to 1 500 kkr, according to a calculation model coming from Försäkringskassan. For every percent the sick level could be reduced, the company would save 239 kkr. To map out the state of health of each and every collaborator in LF, the company offered all employees to make a health profile at the company's health service, Clarahälsan AB.

Syftet med studien är att bidra till ökad förståelse av och fördjupad kunskap om taluppfattningens och skriftliga räknemetoders betydelse för hinder i elevers matematikutveckling, särskilt avseende addition och subtraktion, samt undersöka hur lärare arbetar med dessa områden för att förebygga och möta hinder för matematikutveckling.Elevers matematikkunskaper sjunker och på senare år har brister i taluppfattning uppmärksammats som en möjlig orsak. Denna studie med kvalitativ ansats har intervjuer och skriftliga dokument som datainsamlingsmetod. Hur uppfattar nio lärare som undervisar i år 1-6 nödvändiga kunskaper i taluppfattning för att hantera skriftliga räknemetoder i addition och subtraktion och vilka förklaringar till brister lyfter de. Vilka verktyg används för att få kännedom om elevers kunskaper i matematik vad gäller taluppfattning och skriftliga räknemetoder?Av resultatet av studien framkommer att det finns variationer i uppfattningar om nödvändiga kunskaper och undervisning om taluppfattning och skriftliga räknemetoder.

This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

The residential and service sector in Sweden accounts for approximately 38% of the total energy usage and Sweden has an aim to reduce the total energy use by 20% by 2020 compared to 2008, which means residential sector will have to improve energy efficiency. As part of that a law was instituted by the Swedish parliament that all properties must have an Energy Performance Certificate (EPC) to thereby give the property owners a greater insight into energy use in their buildings and propose recommendations for energy-efficiency measures. On the EPC, a value on the building's energy performance in terms of energy use in kWh / m2 per year is declared, of which electricity is a share of it. Instructions on what to include in the amount facility electricity for running the facilities is regulated by the authority for building, Boverket while SVEBY has made an interpretation of the regulations in their report "Brukarindata bostäder" where they have a table on what should be included in the amount and what not to include.This report is a study of two similar apartment buildings, where one of the buildings recently underwent renovation, to see if the declared amount of energy for electricity, in the EPC, is consistent with the measured value, and whether there has been any reduction in facility electricity in the renovated building after the renovation.The result shows that the measured value of the building electricity was 2.6 kWh / m2 per year, 28,8 %, lower than the declared value in the building that have not undergone a renovation. Calculation of values from previous years (2011) by the same percentage of facility electricity as in the results of the measurements, 56.7%, it becomes clear that the declared value for facility electricity in the EPC of the renovated building do not correspond with reality and that there has been an increase in use of facility electricity after the renovation..

With a shifting world market and periodically profitability issues, Swedish farmers seekalternative ways to enhance their profitability. One interesting alternative to get a highervalue and enhance products is biodiesel, a way to improve the profitability on a farmscale.The diesel that is produced and sold, already have a mixture of 5% biodiesel, andthere is a possibility to add more biodiesel to it. By developing new engines severalengine-manufacturers now allow a mixture up to 100% biodiesel in their engines. Hencethere is a market for an increased production of biodiesel. The aim of this study were toinvestigate the possibilities and the problems related to farm-scale production ofbiodiesel, and to study the profit margin in the production.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.