Helsingborg has the intention to build a train tunnel south of Knutpunkten. This report investigates the hydro geological aspects of the project. Questions at issue that will be answered: 1. Which parameters affect the groundwater level? 2. How will these parameters change within 100 years considering climate changes and what will be the consequences on the groundwater level. According to SMHI climate analysis the climate can change causing increasing precipitation, temperature, and a rising sea level.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).

This is a literature review of how the climate change affects the forest growth innorthern Sweden. The temperature will rise about 5 °C with the largest increase in thewinter season (December - February) and the CO2level in the atmosphere is expected tobe doubled. Precipitation patterns will change and increase with 25-35 % and theprecipitation will be in form of rain rather than snow. Today the forests in northernSweden are entirely dominated by coniferous stands. This may shift with the climatechange and results in a larger number of deciduous trees, preferably birch will becomestronger and grow better and faster.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

People in today?s society are becoming more and more aware of how important it is to use energy as efficiently as possible. This is clearly noticeable by an increase in home produced heat with e.g. solar panels or heat pumps heating systems. These changing customer demands forces district heating technology to be redesigned, which is why there is an ongoing research regarding the next generation of district heating - low temperature district heating (LTDH).

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

Staphylococcus aureus belongs to the normal flora. Many healthy people are colonized by the bacterium mainly in the nose but also on the skin and on other mucous membranes without showing symptoms. After damage to the skin, the bacterium can enter the wound and cause infections. Methicillin-resistant S. aureus (MRSA) is resistant to b-lactam antibiotics such as penicillin and methicillin.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Background and aims: The population of older people in our society is increasing. Agerelated changes in the skin results in a diminished perception of pain and pressure and a decreased microcirculation in the skin affects its ability to adapt to injury. Occurrence of pressure sore on geriatrikal clinics are 5-10%, witch means that between five and ten thousand patients gets daily treat for pressure sores. When the patient gets a pressure sore the need for help increases. A common apprehension is that if the patient?s affects with pressure sores it?s because of deficiency in care.

Background: One of the healthcare tasks is to inform and support patients. Information and support is very important for the management of the disease in patients with psoriasis. Healthcare often focuses on the medical aspects and can easily forget about the individual behind the disease.Aim: To explore what kind of information and support patients with psoriasis receive and need to manage their skin disease.Method: Quantitative study with descriptive design and qualitative elements by analysis of the questionnaire with open questions. The study included 22 participants.Findings: The majority of participants responded that they had received information about various therapies, medications and generally about psoriasis. The information participants most often responded they needed, was essentially continuous information and updates on treatments and knowledge about psoriasis according to medical science.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

In the process of making carton boards into Skoghall Mill, are great quantities of water being contaminated. This water has to be treated before it is possible to release into the recipient, Kattfjorden. One of the contaminations that is important to extract from the wastewater, is organic carbon (measured as TOC-total organic carbon) because microbiological breakdown can lead to the bottom becomig free of oxygen.The wastewater treatment at Skoghall Mill is done through an external wastewater treatment that is located at the factory. The biological treatment (aerated lagoon) is a 140 000 m3 water pool with surface aerator, which is give oxygen to the water. In the lagoon live microorganisms who performs the biggest part of the TOC-reduction.One problem with the lagoon is that the treatment of TOC is considerably worse during wintertime than during summertime.