This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

This thesis work has been performed at the Division of Assembly Technology at Linköping University for a period of ten weeks. The work is part of the project ProFlexA, which is a research project in collaboration between Linköping University, Lund University, and industrial partners such as Combi Wear Parts and Smålands Stålgjuteri AB.The casting process creates random incurred burrs and defects, which must be removed during a cleaning process to make sure that the cast can be sold. Automation has long been sought for the cleaning of castings due to, among other things, poor working conditions for staff, but this has proved difficult to implement with today's technology. Automation has for some time been available for more capital strong companies with large annual volumes, but for smaller companies with small-and medium-sized volumes, automation has not been an option.The goal of ProFlexA is to develop an automated cleaning cell aimed at small-and medium-sized volumes.The goal of the thesis is to do a pre study at ProFlexA?s partners on cleaning of castings, and develop concepts for automated cleaning of castings.By recording the process and cycle times, the cleaning of castings has been documented as it works today, and on this basis, information and statistics has been compiled.

The purpose of this BA-thesis was to study how three daily Swedish newspapers use a specific type of exemplars, which are recognized by a number of attributes. A photograph of the person that is interviewed always illustrates this type of exemplars and at least two persons are asked the same question.    The three newspapers that have been compared in this study each represent one of the major types of Swedish newspapers: morning press, tabloids and local press. By using a quantitative content analysis, one month was examined in all three newspapers in the year of 1997 and 2007.  Two of the theories that have been central in the thesis are Colin Sparks model of tabloidization, which demonstrates the process of tabloidization and McQuail?s description of commercialization.

In this study I compare the donor portraits on wallpaintings in Scanian churches from the 12th and the 15th century and relate them to medieval society.I find that women were equally capable of owning and donating land during the entire period. The image of the ideal woman changed during the 14th century from a married woman to the unreachable mistress of the chivalrous culture and the holy virgin. Women had a natural place beside their husbands in 12th century donor portraits, while single male donors are more frequent in the 15th century. While 12th century donors were supposed to show their position in society by offering plentiful donations directly to God, donors in the 14th century instead strived to present themselves as humble and pious. The individualisation of late medieval society meant that people had to depend on themselves to achieve salvation..

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

Modeindustrin st?r f?r n?rvarande inf?r betydande h?llbarhetsutmaningar p? grund av dess skadliga milj?p?verkan. Den h?r studien unders?ker hur blockkedjetekniken kan anv?ndas f?r att ?ka transparensen i modef?retagens v?rdekedja. Genom att utforska blockkedjans potential f?r att fr?mja h?llbarhet och ansvarsskyldighet inom branschen syftar forskningen till att belysa innovativa l?sningar f?r att hantera milj?h?nsyn och etiska metoder. Viktiga aspekter som tas upp i studien ?r bland annat motiven bakom inf?randet av blockkedjeteknik i v?rdekedjor inom mode, hur dynamiken i leveranskedjan och principerna f?r cirkul?r ekonomi p?verkar behovet av ?kad transparens samt vilka konsekvenser inf?randet av blockkedjor f?r f?r h?llbarheten i modesektorn.

Since year 2005 the accounting has changed for public companies because of the new international standards, IFRS. IFRS 3 provides a single international accounting treatment for acquisitions and has broadened the definition of intangible assets. By IFRS 3 goodwill is defined as the excess of the cost of acquisition and is separated from intangible assets. Now goodwill must be annually tested by an impairment test. There are many valuation issues to considerate when it comes to deciding the value of goodwill.

Syftet var att undersöka om kinesiotejpning kunde påverka aktivitetsförmåga och smärta hos gravida kvinnor med pelvic girdle pain. Studien var en single subjekt experimentell AB-design. Fyra kvinnor inkluderades i pilotstudien för behandling av pelvic girdle pain. Smärtan skattades och mättes med visuell analog skala. Aktivitetsförmågan mättes med Roland &  Morris disability questionnaire.Resultatet visade att gällande aktivitetsförmåga kunde det med 95 % säkerhet ses en förbättring hos tre av kvinnorna.

SWITCH- Swedish Intelligibility test for children, is a test thatmeasures intelligibility of children's speech through repetition of singlewords. The test is computer generated and consists of 1000 word listsrandomly selected for each assessment. The purpose of this study was toexamine the equivalence, reliability and validity in the word lists. Word listswere tested on ten children with typical language development (N group)and ten children with speech deviation (T group). The children were audiorecorded when they repeated two lists.

Learning Management Systems (LMSs) hold great potential to support learning activities, for example by providing teachers and students with new and extended spaces for interaction and collaboration. However, this potential appears to be difficult to realize, and despite their perceived learning benefits, the reality is that LMSs are being used primarily for administrative purposes. Meanwhile, external pedagogical tools are successfully put into practice to improve learning outcomes, and the aim of this study is therefore to identify and discuss benefits and disadvantages associated with the LMS as a concept. By interviewing secondary school teachers, we disentangle the idea of integrating administrative and pedagogical aids into a single platform, providing detailed insight into the use of digital tools in secondary education. The study contributes to a deepened understanding of integrated learning environments, and we conclude that there is a conflict between structure and flexibility that needs to be addressed before determining the design of a digital learning space..

The subject of religion in Swedish schools is the single most talked about topic in the curriculum. One explanation could be that it is the oldest subject in Swedish schools and the topic has undergone the biggest change through time. This process of change has been anything but undebated. The subject of religion within schools has met debates through almost its entire history, partly from the state and from the church, but also from the teachers and the students. Debates concerning the existence of Christianity in Swedish schools as well as the Swedish traditions constantly reoccur in today?s government debates and various media but in different versions.

Denna studie belyser hur unga kvinnors attityder och identifikation ser ut till mode- och livsstilsbloggare i Sverige. Bloggar har under det senaste decenniet vuxit och blivit ett stort internetfenomen. Syftet med studien a?r sa?ledes att ta fasta pa? hur bloggla?sarnas blogganva?ndning ser ut samt hur deras fo?rtroende och relation till bloggarna bero?r dem. Detta fo?r att a?ven kunna belysa hur reklamen i bloggarna upplevs av bloggla?sarna.

The transport sector is one of the biggest pollutants in the European Union. In relation to transport policies and environmental policies, intermodal transportation solutions are of high relevance to establish a sustainable transport sector for the future. Intermodality which is defined as smooth transition between transport modes is a key figure for how modal shares are divided between the modes of transportation. The aim of this bachelor?s thesis is to examine the research gap whether policies intended for a specific transport mode affects each other in relation to EU policies intended for intermodality.

This essay talks about how teachers in schools are working with a particular focus on students with autistic syndrome. The aim is to investigate the methods used for these students, who develop their learning and achieve the goals of the school. The methods that were used in this study were two interviews in two different schools in central Sweden where teachers and professionals were interviewed. One part of the study was to compare both schools to see which methods they used and when they used them. My interest for autistic students started during my practice in a school.

The purpose of this study is to examine young people?s opinions about libraries using social media for communicative and marketing purposes. There are three research questions: What do young people think about libraries using social media for communicative and marketing purposes? Do they want to interact with libraries in social media and, if so, in what way? Are their opinions and their will to interact influenced by what kind of relationship they have with libraries, their reading habits, and whether or not they use libraries? digital services? Prior research is divided into three themes: library development, marketing, and young people. The theoretical framework is made up of a combination of relationship marketing, using Evert Gummesson?s three catchwords relationships, networks, and interaction, and the engagement pyramid, as depicted by Brit Stakston.