Examensarbetet studerar möjligheterna att använda en statisk cross hedge för att prissäkra etanol. Situationen som analyseras är hämtad från Lantmännen Agroetanol. Agroetanol är Sveriges största producent av etanol och driver den första anläggning i Sverige där vete omvandlas till etanol. Anläggningen är Sveriges största och byggs för närvarande ut så att kapaciteten kommer under år 2008 kommer att öka med 300 procent. Priset på spannmål har stigit dramatiskt under år 2007 samtidigt som etanolpriset har sjunkit något.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based Simulation model.

Introduktion: Patientsäkerhet är viktig inom intensivvård och vårdpersonal behöver vara uppmärksamma och medvetna om detta. Klar och tydlig kommunikation samt ett välfungerande teamarbete kan motverka misstag och förbättra kvalitén på vården.Syfte: Syftet var att beskriva hur medicinsk simulering påverkar teamarbete på en intensivvårdsavdelning och därmed patientsäkerheten.Metod: Fokusgruppsintervjuer med semistrukturerade frågor genomfördes, deltagarna hade genomgått simuleringsövningar. Intervjuerna spelades in och transkriberades ordagrant. Deltagarna bestod av 4 sjuksköterskor samt 3 läkare, deltagarna intervjuades i grupper på två och två i varje yrkesgrupp var för sig, en läkare intervjuades enskilt. Analysen bestod av en kvalitativ innehållsanalys.Resultat: Tre temata framkom under analysen, Ökad medvetenhet, Kommunikation i teamet samt Teamet och dess roller tydliggörs.

Stationsetablering innebär bestämning av ett mätinstruments fysiska läge och orienterad riktning. I dagens bygg- och anläggningsbransch används nästan uteslutande fri station för att etablera en stationspunkt för mätningar. På en byggplats är tillgången till referensobjekt ofta begränsad. Instrumentets placering blir därför en kompromiss mellan tillgång till referensobjekt och tillgång till den plats där inmätning respektive utsättning skall ske. Denna kompromiss ger upphov till skiftande geometriska konfigurationer hos referensobjekten, vilka påverkar mätresultatet.Studiens syfte är att undersöka om simuleringar av fria stationsuppställningar i Svensk Byggnadsgeodesis (SBG:s) programvara Geo verifieras av fältmätningar och efterföljande beräkningar av osäkerhetsparametrar orsakade av konfiguration och mätta längder och riktningar.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

I detta arbete har den faktiska och simulerade energianvändningen på Spira förskola i Luleå undersökts. Den faktiska specifika normalårskorrigerade energianvändningen fastställdes till 121,4 kWh/kvm år. Vid projektering av förskolan uppskattades den specifika energianvändningen med hjälp av simuleringsprogrammet VIP-Energy till 78,5 kWh/m2 år. Därmed översteg den verkliga användningen den simulerade med 54,6 %.En parameterstudie av indata till simuleringsprogramet har också genomförts med avsikt att fastställa den totala förändringen i energianvändning då indata ändras. Följande parametrar har studerats;?Drifttid hos ventilationssystemet?Horisontvinkel?Inomhustemperatur?Klimatzonen?Kvot mellan till- och frånluft?Luftomsättning för ventilationssystemet?Solreflektion från omgivande mark?Temperaturverkningsgrad?Vindhastighet?Vridning av byggnadenNyckeltal som kan användas för att snabbt uppskatta påverkan på den totala energianvändningen har också sammanställts för majoriteten av de studerade parametrarna.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This case study is made on assignment of Södra, region Öst, as a part of a campaign promoting more active management of the oak forests in the region. Hardwood trees of good quality, especially oak, has a high value due to that the sawn material is highly estimated by the market. It is important that the Swedish oak forests are managed in a proper way in order to meet the future demand. Södra has therefore decided to increase the focus on oak in the Kalmar region and they would like to find out if continues cover forestry (CCF) under certain conditions can be an appropriate management model. The motive is to make use of the existing oak forests more efficient, not just considering well managed forests but also the more neglected oak forests, on poorer soils. Thus, the objective for this study is to examine if CCF is appropriate method in the three stand types; broadleaved mixtures oak forest, oak islet, and oak/spruce forest. Existing management models were surveyed in the literature.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

Detta är en kapacitets- och känslighetsanalys av bagagehanteringssystem vid Arlanda flygplats. Studien är ett examensarbete för civilingenjörsutbildningen Kommunikations- och Transportsystem vid Linköpings universitet och är utförd på uppdrag av Luftfartsverket, LFV Teknik under 2004 och 2005. Studien har gjorts med datorstödd simulering som analysverktyg. Studien har gjorts genom att en simuleringsmodell av det studerade systemet har byggts i simuleringsprogrammet Arena. Denna modell har matats med trafikunderlag från en normalvecka under 2004.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the Simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

Abstract   This degree project comprises 30 credits, i.e. 20 weeks of work. The work mainly deals with the energy balance for a multi-family house in Västerås and the requirements for energy conservation in the Swedish building code, BBR. Calculations of the energy balance are supplemented by a number of interviews. Energy conservation in general has become more important in recent years and the subject is in line with increased public awareness. This importance and attention is explained by environmental problems in general and global warming in particular, but also by rising energy prices.

Today the human being see energy as a matter of course but the resources that is used for extract energy is today not enough for the world demand. Of all the energy that is used in Sweden today approximately 40 % goes to the building stock. This number will most likely increase if not necessary actions will be made on the already existing building stock since new houses constantly are built which will be added up on the already existing energy supply. This takes cause of action on the already existing building stocks, to fulfill the demands of the future use of energy that has been set by the authority. At the same time the thermal conditions cannot be influenced by the necessary changes that must be made.