AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the Simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

Världshandeln växer kraftigt och det vanligaste sättet atttransportera gods mellan landsgränser är genom sjöfart. I takt med attvärldshandeln växer, ökar också storleken på fartygen. Detta innebär att enstörre mängd gods anländer samtidigt när ett fartyg förtöjer vid en hamn. Föratt hantera denna ökade mängd gods måste godsnav och hamnar ständigt utvecklaoch effektivisera verksamheten. Detta innebär att långsiktiga prognoser ochplaner måste utvecklas för hur större fartyg skall kunna hanteras.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

The aim of this essay was to study the nitrogen flow in two willowplantations, at different locations in the south of Sweden, that wereirrigated with sewage. The study was also performed to compare thedifferences in nitrogen flows between two years, 1998 and 1999. The studywas made in three parts. First, the denitrification activity was measuredusing the acetylen inhibition method. Second the nitrogen flow, as well asthe water- and heat flows, were modeled through the SOIL-SOILN-modelThird; the nitrogen flow was calculated to compare with the results fromthe model.The results from the measurements were then compared with the resultsfrom the SOILN-Simulations to detect differences in the denitrificationrate.

Real estate financing is one of the key figures for financial success and fundamental to asuccessful business. Funding will come in several different ways, from existing cashflows andassets to new capital requirements which are aimed at different markets.These markets are constantly changing and since the recent financial crisis, there have beenadjustments and austerity measures which led to that the banks have become more restrictive intheir lending.The real estate industry is characterized by both long-term and short-term thinking that ischaracterized by a solid continuity. Our thesis discuss how the demand is in the real estatebusiness and how mature the Swedish market is for junior financingwith focus aroundmezzanine debt and where are we headed in the near future.We've reached out to the key players in the industry on both the buy and sell side of real estatefinancing but also people between lenders and borrowers that handles transaction advice. Tohave been able to implement the analysisa survey and Simulation of an investment calculationwas created. This questionnaire was answered by many real estate companies with senior peoplethat had operational positionsmost associated with corporate commitments.

The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The Simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.

Det ständigt ökande trycket på minskande utsläpp och effektivare energianvändning driver utvecklingen av Scanias produkter. För att varakonkurrenskraftiga på marknaden behöver man leverera lastbilar med högre kvalitet och lägre bränsleförbrukning, det vill säga sänka transportkostnaderna förkunden. Ett steg i detta är att utveckla komponenter i fordonet som är optimerade iförsta hand med avseende på hållfasthet men även mot vikt och pris. En betydande andel av lastbilens komponenter är plåtfästen som ofta underprioriteras i produktutvecklingen. Examensarbetet fokuserade därför på att utveckla metoder för konstruktion av plåtfästen.En metod för att förbättra konstruktionerna är att arbeta med simuleringsdriven konstruktion.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the Simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

This Master?s Thesis is an evaluation of the software Xilinx System Generator (XSG) and blockset for Matlab. XSG is a module to simulink developed by Xilinx in order to generate VHDL code directly from functions implemented in Matlab. The evaluation was made at Saab Avionics AB in Järfälla, north of Stockholm. In order to investigate the performance of this new module XSG to simulink, a model of a frequency estimator often used in digital radar receivers were implemented in Matlab using XSG.

This master thesis was carried out for Saab Avitronics, a business unit of Saab ABactive in electronic systems for military aircrafts. Reliability and weight are of crucialimportance in this environment. To improve reliability and lower the weight graphitemay be used for electronics cooling. Graphite is an anisotropic material and hasthereof high thermal conductivity in two directions (in-plane) and a relatively lowconductivity in the third direction (through thickness).The purpose of this thesis was to investigate if graphite is an adequate thermalconductor to use in PCB carriers. The carriers support and cool the PCB by divertingthe heat dissipation from the PCB components to the edge.

This study aims to investigate how, in Montesquieu?s Persian Letters (1721), religion and religious structures are presented to influence women?s position in French society.In Persian Letters Montesquieu presents a dogmatic religious life, which proceed from a literal interpretation of the bible. Such a reading raises critical questions concerning the nature of women, and subsequently places man over woman. Persian Letters show how this male dominance gets institutionalized in marriage. The religious life depicted is also distinguished by a non-genuine religious conviction and by acts which take on a Simulation form.

The purpose of the thesis was to map the hydraulic load on the Knivsta river from stormwater runoff, and build a platform for further studies of pollution loads on the rivers ecosystems. New residential areas are planned to be built in Knivsta municipality and it will have an impact on stormwater flows to Knivsta river. To examine the impact this will have, Simulations were made in the area as it stands today and after expansion work. The work includes calculation of flows from the populated areas but also from the catchment area around it consisting of woodlands and fields. Because of expected climatic changes which may affect rainfall, the Simulations have been performed with different return periods for rainfall data.

Bakgrund Det finns stora risker att personer med autism och utvecklingsstörning har ett problemskapande beteende. Omgivningen behöver tydliga rutiner och ett genomtänkt bemötande i kritiska och våldsamma situationer. Personalen spelar en avgörande roll för händelseutvecklingen. Ett lågaffektivt bemötande erbjuder metoder att förebygga och hantera problemskapande beteende på ett icke-kränkande och icke-våldsamt sätt genom flexibel kravanpassning.Metod Tre fokusgruppsamtal med sammanlagt 12 pedagoger på tre olika särskolor för elever med autism. Samtliga pedagoger har det senaste året gått en tredagarskurs i lågaffektivt bemötande.

WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the Simulations that WSP has done at the certification of the preschool. The differences between the results from the Simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with Simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.