The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The task of constructing a transmission has been provided to us by Digital Engineering, which is a company located in Hovmantorp. After meeting with Digital Engineering we started immediately with the brainstorming to find different ideas with pen and paper. After having presented a number of concepts for the company, we had finally chosen a winner. For the gearbox to be able to work in a good way the tension must never exceed the strain limit of the material. A prototype of the gearbox was produced by TKB Modell.

Volvo Human Monitoring (VHM) är ett pågående projekt på Volvo Personvagnar där dem bland annat mäter in- och utandning genom en mätutrustning, kallad respiratorisk induktans pletysmograf (RIP), som mäter förändringar av tvärsnittsarean av bröstkorg och buk. När föraren är i rörelse till exempel när hon svänger ändras tvärsnittsarean och en ?störning? i RIP-signalen kan uppkomma.Dessa störningar medför att vid analys av RIP-signalen måste stora manuella justeringar utföras, vilket är mycket tidskrävande, och utrustningens validitet för mätning av in- och utandning ifrågasätts.Syftet med denna studie var att effektivisera analysen av en RIP-signal som registrerats vid bilkörning. Målsättningen var att skapa ett nytt databearbetningsverktyg i Matlab som på ett automatiskt sätt kan detektera in- och utandning från en RIP-signal med högre validitet än det existerande databearbetningsverktyget.I studien utfördes tester på nio förare under bilkörning på landsväg, grusväg, motorväg och i stadstrafik. In- och utandning mättes med en RIP, en pneumotakograf med en tätt sluten ansiktsmask och ett termoelement som var placerad mellan näsa och mun som referensutrustning.Resultatet blev ett databearbetningsverktyg som automatiskt detekterar in- och utandning med högre validitet än det tidigare internutvecklade databearbetningsverktyg.

Växthus används för att ge ett bättre odlingsklimat åt grödor och växter. För ytterligare förbättring av förhållandena används växthusvävar som exempelvis kan reglera temperatur, fuktighet och ljustillförsel. Väven som behandlas i denna rapport är en så kallad energiväv som främst har till uppgift att minska energiåtgången vid uppvärmning.När väven är fördragen nattetid, ökar luftfuktigheten då grödorna avger fukt dygnet runt. Fukten kan kondenseras mot energiväven, vilket gör att det bildas droppar på väven som kan falla ned på växtligheten. Den höga luftfuktigheten kan medföra svampsjukdomar och i övrigt också bidra till att tillväxten avstannar.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

Emerging infectious diseases poses a great future threat, not only to humans but also to domestic animals and wildlife. Even though the majority of these infections only cause minor health problems, the relatively recent emergence of HIV clearly illustrates that the next major human pandemic may surface at any time. Regardless of what the name indicates, most emerging human pathogens are not believed to be recently evolved, but to have existed previously in the natural environment. Most emerging pathogens are zoonotic, i.e. able to infect animals besides humans.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

This thesis considers the development of the software for an, newly developed, embedded real-time control system, based on a Periferal Interface Controller (PIC). The control system is developed to be used for several different applications. In this thesis work, software for two different applications are developed. The first task is a time controlled system, while the other task is implementation of aPI-/PID-controller. A user interface is also developed and implemented.The time controlled system is an automatic horse feeder, which is used for feeding horses at certain predefined points in time.

This report will show the energy usage of Hotel Princess in Sandviken, Sweden. When the hotel changed owner an examination of the hotels heating, ventilation and sanitary systems were done. The report showed flaws in the ventilation system, and is why the new owner wanted a closer look at the energy use of the hotel. The original building was built in the 1930s and two major extensions have been built, one in the 1950s and the most recent in the 1980s. An assumption made is that the building parts were built to the restrictions during the time. Activities on the hotel include sleep over, conference, night club, massage and swimming in the hotels pool section.

Transmission of reactive power is well known to cause active power losses. Thus, newcomponents who can help minimizing these expensive reactive power flows are ofgreat interest to the power distribution companies. ABB Corporate Research hasdeveloped the first electronic power breaker. One possible application for thisbreaker is transient-free switching of capacitor banks. This could prove a usefuldistribution voltage complement to the switch-sync technique, mainly applied to transmissionvoltage level.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

Syftet med vår uppsats var att utreda om intressenterna anser att den orena revisionsberättelsen utgör en negativ signal och vilka åtgärder de därmed eventuellt vidtar då företag uppvisar oren revisionsberättelse. Vidare skulle vi undersöka om företag med orena revisionsberättelser i större grad går i konkurs eller likvidation än företag med rena revisionsberättelser. Med utgångspunkt från agentteorin och signalteorin skapade vi vår egen modell. Modellen beskriver händelseförloppet efter att revisorn utfärdat en oren revisionsberättelse, då intressenterna vidtar åtgärder mot företaget vilket som i slutändan påverkar företagets fortsatta existens. För att kunna realisera vårt syfte genomförde vi en explorativ intervju för att få en djupare förståelse i ämnet, vilket sedan låg till grund för datainsamlingen.

Denna examensrapport redogör för hur man kan få en kortslutningsskyddadoch säker inkoppling av en DC-länk mellan två skiljda elektriska system.Rapporten bygger på hur en lastbil ska kunna få en större säkerhet för attbibehålla sina elektriska bromsar om tex ett av bromssystemen tappar sinordinarie matning.Lastbilens bromssystem består idag av två skiljda elektriska system med ett 24volts strömförsörjande batteri vardera. Det ingår två stycken elektriskabromsar i varje system. Om det tex blir fel på en av bromsarna och dennapåverkar ett av systemen vill man kunna koppla bort denna enskilda bromsmed sitt system. Man vill även kunna försörja den fungerande bromsen somsitter i samma system via en så kallad Axle Link. Denna strömmatningslänksitter mellan två hjulpar på samma axel.I denna studie undersöktes möjligheten att realisera en kortslutningsskyddadoch säker DC-överföring via en Axle Link, i första hand med diskretakomponenter.