Stereotypic pacing is frequently observed in captive carnivores, however the underlying causes of this behaviour remain somewhat unclear. One of these possible causes are unpredictable feeding signals, which may give rise to frustration and subsequent pacing. Animal keepers at Nordens Ark had noticed that their Amur leopards had shown stereotypic pacing in connection to the passing of ATVs (All Terrain Vehicles) used by animal keepers primarly when feeding the animals in the park. The aim of this study was to investigate whether the stereotypic pacing of the two Amur leopards at Nordens Ark were affected by the introduction of a signal associated with feeding. The leopards were trained by classical conditioning to associate the sound of a siren with the delivery of food by an animal keeper.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

In today?s horse keeping, there is an increasing awareness of the importance of movement and activity for the horses comfort and tenability, while tradition has it that horses should be kept in boxes and small paddocks. In order to develop housing systems that fulfils and optimizes the horses needs regarding movement and activity, we need to know more about factors that influence the activity patterns of horses. A first step is to be able to record and analyze the gaits in horses with an automated system. This could be done by use of accelerometer data.In this pilot study, existing accelerometer technique was used to characterize the different gaits in horses (walk, trot and canter) by studying how their respective signal patterns differ and how this is influenced by the size of the horse.The accelerometers being used in this study measures the movement in three different spaces; horizontal, lateral and vertical.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

Store managers and brand owners have realized the benefits of sales promoting activities in-store, which thus have become a common sight for consumers when grocery shopping. Using in-store displays, a brand?s sales can increase by more than 1000 percent. We believe, however, that displays can give rise to additional effects to those previous studies have shown. The purpose of our study was therefore to map possible side effects that a display can generate depending on the strength of the exposed brand.

Core strength is important in order to be able to do all types of daily activities. One way to exercise ones core muscles is according to the pre- choreographed program Fokus. Previous studies have shown that core training gives better balance and stability in the core and also improved techniques, body awareness and control. Aim: To evaluate the core endurance strength, the balance and the studied individuals self estimated body awareness and control after six weeks of training according the pre- choreographed program Fokus. Methods: A total of 14 people volunteered to participate in the study, six of which completed the study.

Core strength is important in order to be able to do all types of daily activities. One way to exercise ones core muscles is according to the pre- choreographed program Fokus. Previous studies have shown that core training gives better balance and stability in the core and also improved techniques, body awareness and control. Aim: To evaluate the core endurance strength, the balance and the studied individuals self estimated body awareness and control after six weeks of training according the pre- choreographed program Fokus. Methods: A total of 14 people volunteered to participate in the study, six of which completed the study.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

Concrete is one of the world?s most common construction materials and is composed of 70-80 % stone material. Today crushed stone is used as aggregate in concrete in order to replace natural aggregates due to strong environmental reasons. Stone crushing yields flaky material and in this thesis studies are made on the flaky particle shape and how it influence properties of concrete such as workability, rheology and strength. The concrete recipes used in this thesis have fixed values, the only variable is the flakiness of the crushed stone.

In today?s industry it is starting to get more and more interesting with wireless systems and solutions for applications. To be able to reduce the amount of cables drawn to various machines which takes both space and an extra fee for every cable drawn. Some systems might require the user to use a handheld device that is directly connected by a cable which in some machines might be inelegant for the user.The goal with this bachelor thesis is to develop wireless monitoring of the machine operators position that is working with heavy industrial machinery. The thesis started out with researching different techniques for positioning a transmitter indoors, this was done in order to get a better understanding on how to go about.

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

Målet med examensarbetet var att ett trådlöst mätdatainsamlingssystem ska tas fram för att ersätta det trådburna insamlingssystem som idag används vid FOI i Bromma, vid mätning på vindtunnelmodeller. Projektet innefattar konstruktion, inköp, dokumentation, test och utvärdering. En del i projektet är att utvärdera ett nytt CAD system för kretskortskonstruktion.Enligt framtagen kravspecifikation konstrueras ett signalkonditionerande kort som förstärker, balanserar och filtrerar insamlad signal samt ett processorkort som digitaliserar och skickar konditionerad signal trådlöst till mottagande del.Prototypen som projektet resulterar i, uppfyller de krav och specifikationer som FOI hade på det nya systemet, dvs. analog signalkonditionering, digitalisering och tvåvägskommunikation. Systemet har med sin enkla funktion påvisat att lösningen är realiserbar och att den fungerar.

Målet med detta examensarbete var att utveckla en fungerande prototyp för styrning av ett portabelt filter med varvtalsreglering och tidräkning. Om möjlighet fanns, skulle även tillval som tryckstyrning, gasindikering och flödesmätning göras. Dessa tillval kunde regleras med hjälp av fyra knappar. För att allt skulle vara lättare att hålla under uppsikt, kunde alla inställningar och värden ses på en LCD-display. Konstruktionen består av en mikrokontrollerstyrd elektronikkoppling med extern realtidsklocka för drifttidsräkning.

I detta examensarbete har ett system utvecklats som samplar och digitaliserar en högfrekvent analog signal och lagrar de samplade värdena i ett minne. Systemet genererar en analog utsignal genom att antingen direkt omvandla de samplade värdena eller genom att använda sampels lagrade i minnet som källa för omvandlingen. Det går då att använda systemet både som en passiv länk eller som en signalkälla.En triggfunktion har implementerats för att på ett effektivt sätt ge möjlighet att fylla minnet med för användaren intressanta delar av en signal. Arbetet går även ut på att undersöka om ett FPGA-kort av typen Stratix II DSP Development Kit är ett lämpligt utvecklingskort för att ta fram en prototyp av systemet. Kortet har undersökts med avseende på olika begränsningar för det utvecklade systemet, till exempel vilka frekvenser en insignal kan samplas i.Ett annat användningsområdet för systemet är möjligheten att få alla sampels lagrade på kortet presenterat i en textfil på en ansluten PC.