The purpose with this thesis was to study the special pedagogical perspectives that stood out in documents written by the special teachers in preschool. In order to maintain the thesis research questions a text analysis was carried out on the document ?Handledningssamtal? that was used by the special teachers in their contact with the teachers in preschool. The documents were analyzed based in the special educational perspectives and the results and measures from the analysis were divided into three levels; individual, group and organizational level. Finally a study of the connection between the analysis and the measures was carried out and the result was reported in a typology schedule inspired by earlier research.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This paper deals with the question of when hill forts ? or enclosed mountains ? were built and to what purpose, by examining two enclosed mountains (RAÄ 78 and 79) in Grödinge parish in the province of Södermanland. A phosphate analysis was conducted to trace anthropogenic activities. The analysis showed only a slight elevation of phosphate content in the soil. A histogram indicated that the elevations were not normally distributed, which could suggest that they were caused by anthropogenic activities.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

AbstractIn this bachelor thesis I discuss and analyse the current situation of the Venezuelan democracy. By using a theoretical framework based on the theory of horizontal accountability, I focus on the interaction between different institutions and branches within the state of Venezuela. The analysis focuses on the strenghts and flaws of the newly accepted constitution, and to what extent the institutions of checks and balances remain true to the laws and the constitution of 1999. My conclusions are that in terms of vertical accountability, the Chávez-regime acknowledges a wide popular support for their governmental actions. In contrast, the incumbent administration shows almost no respect for horizontal accountability.

In order for a judgement to be enforceable in another Member State, there is a certain requirement for an "intermediate? court procedure, a so-called exequatur procedure. An exequatur procedure is both expensive and time-consuming. The average cost of the procedure within the EU is 2 200 euro in a case without particular difficulties. In more complex cases, the cost of the procedure can be validated up to 12 700 euro.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

Objective: The study will investigate whether cash liquidity have a negative affect on profitability and share value of companies, listed on Nasdaq OMX Stockholm 2008-2011. Part of the purpose is also to show if the industry risk is of importance for treasury management of these companies.Method: The methodology for the study is key analysis through hypothesis testing and regression analysisConclusion: The liquidity ratio affects profitability in a negative direction on the entire sample. No other conclusion can be drawn..

The purpose of this paper is to examine how LKAB are portrayed in the newspaper Dagens Nyheter (DN). The methods that were used were: Critical Discourse Analysis (CDA) combined with Critical Linguistic Analysis. These were used since they help to reveal the structures and unconscious meaning and power of word. It gives the tools to see how authority, power and meaning of words are constructed during social practice of the way they are used. To complement the method the theories that?s used are discourse analysis since CDA is both a method and a theory.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The Swedish potential of electricity production from roof mounted solar panels has been determined in three steps: accessing the existing roof top areas, simulating the amount of electricity solar panels can produce on these areas and finally analyzing how large the necessary economical change is to make the solar cells profitable.The total existing amount of roof top areas are 319 square kilometers and the area distribution follows the distribution of people. This leads to an installed power of 47,9 GW which are expected to produce 49,0 TWh electricity per year. If the quality of the electricity is prioritized the highest the power is reduced to 3,7 GW, generating 3,8 TWh yearly, but if the hosting capacity is calculated from Sweden?s total electricity need, the capacity is 42 TWh per year.Today, solar panels are not profitable in Sweden for houses, even though there is a subsidy of 35 % of the investment costs, discounted in 25 years. The profitability is calculated with a cost of capital of 5 %, a price on electricity of 1 SEK/kWh and an investment cost of 20 SEK/Wp.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

Uppsatsen utreder ifall det finns en möjlighet till kostnadsbesparingar genom att erbjuda en stor andel av den äldre befolkningen hjälpmedel. Dessa hjälpmedel är tänkta att ha i förebyggande syfte för att minska antalet höftfrakturer. Perspektivet för analysen är samhällsekonomiskt, det vill säga alla möjligheter till kostnadsbesparingar antas tillkomma samma aktör. En uppdelning mellan landsting och kommun görs med andra ord inte. I en cost-benefit kalkyl görs en uträkning på vilken nettoeffekt som uppnås på den samhälleliga välfärden genom att antalet höftfrakturer minskar.En makroundersökning ligger till grund för de hjälpmedel som studeras.