Sökresultat:
264 Uppsatser om Shell walls - Sida 7 av 18
Är det möjligt att använda SCR-rening av rökgaserna vid inblandning av avfall i biobränslet?
Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.
LEED i Sverige och i byggprojektet Borgarfjord 3.
This thesis provides a good introduction to the American environmental certification system LEED, Leadership in Energy and Environmental Design, and trough compar-isons between Sweden and the United States an explanation to the systems design is given. The work is closely linked to a LEED Core & Shell project in Stockholm, Swe-den, where the goal is to reach the second highest rating in LEED - Gold.This thesis gives a broad description of the LEED system and a more profound study of the energy sector, Energy and Atmosphere. Here, for example, an analysis has been made of how the energy consumption of an imaginary building designed according to the requirements of the BBR (Swedish building code) performs in comparison to the Baseline building in LEED.The existing model of Borgarfjord 3, which served as a case study in this work, has al-so been modified to investigate the energy savings that could have been achieved by adding extra insulation to the building. A description of the problems, regarding how the Swedish district heating system (DES) is treated in LEED, is given as well as the suggested modifications. This is an issue that will be pursued during the process of shaping a new, international, version of LEED due to be launched 2012..
Nyutveckling av Nålträdarsystem
This thesis work is performed on VSM Group Ltd in Huskvarna that produces sewing machines under the trademarks Pfaff and Husqvarna Viking. On these sewing machines is an application that helps the user to thread the needle. The aim with the work has been to study today's applications on VSM and their competitors' sewing machines in order to since developing a new Needle-threader that divides itself from all the ones used today. The objective with the work has been an entire new concept with an operational prototype.As a base the competitor analysis was used where today's applications was studied in order to identify positive and negative aspects of these. This led to a number off ?concept families? where different variants off the same ideas were collected and evaluated.
Uttryck i sten : En studie av röjningsrösen, stensträngar och husgrundsterrasser under mellersta järnålder i Uppland
This thesis deals with two types of agrarian remains in relation to settlement remains; clearance cairns, low stone walls and house terraces in the area of Northeastern Uppland and the area north of Lake Mälaren, during the middle Iron Age. The aim whit this thesis is trying to get a better understanding of the relation between agrarian and settlement remains in Uppland. Three places have been chosen where these three elements are present and they are interpreted through Richard Whites concept of middle ground but also Landesque capital. The three elements have shown to be expressed in different ways in all three sites. It is possible to see two areas with different traditions, but also to see two areas that closely interact with each other, this opens up for a new discussion around agrarian remains in both areas.
The Lake
The purpose of ?The Lake? was to create an experience with music and visuals working with no budget.A personal purpose was that I wanted to explore new areas in design, like scenography, and combine them with my previous knowledge and skills. My method was to keep my hands busy at all times and use new materials. I also wanted to work with other creators and learn from their methods. Together with a musician I created the music and the concept for the project.
Risker inom Svartöstadens industriområde: beräkning av individ- och samhällsrisk
Rapporten är tänkt att fungera som ett informationsdokument för de företagen samt personer och funktioner som påverkas vid en eventuell olycka i Svartöstaden. Förhoppningen är att rapporten ska öka förståelsen för vilka risker som finns inom området. Vidare är det även önskvärt att densamma skall kunna fungera som ett styrdokument vid eventuell utökad bebyggelse utav Svartöstaden samt närliggande områden. När en av Norrbottniabanans föreslagna sträckor planeras i direkt anslutning till området, finns det därav ett behov av en sammanställning av de olika företagens specifika risker. Svartöstaden byggdes upp under slutet av 1800-talet, den malm som framställdes vid gruvan i Malmberget transporterades ner till Luleå för vidare transport via fartyg.
Kundkorts effekter på lönsamhet
Syfte: Syftet är att undersöka sambandet mellan kundkort, lojalitet och lönsamhet. Vidare ämnar vi kartlägga lojalitetsskapande åtgärder och hur dessa påverkar lönsamheten. Metod: För att uppfylla det beskrivande syftet med uppsatsen, valde vi att kvalitativt undersöka hur två företag i petroleumbranschen arbetar med lojalitetsprogram. Intervjuer genomfördes med ansvariga för kundkort på AB Svenska Shell och Svenska Statoil AB. Empirin analyserades sedan med hjälp av teorier om Customer Relationship Management, relationsmarknadsföring samt lojalitet och lönsamhet.
Materialval i utfackningsväggar
The aim of this report is to give a concise description of curtain walls, what it is and why they are used. It is also a description of six different but commonly used design technologies. By giving a detailed description of the different types and there special properties, the pros and cons will be clarified. The three most interesting alternatives were selected to be included in a test, to show the best alternative from a certain point of view.The parameters are:? Environment? Cost? Ergonomics? Isolation against noise and fire? DurabilityThese are important parameters in the planning and design phase.
Säker hantering av lösgående nötkreatur :
After I heard that two deadly accidents in farming 2003 were created by work with
cattle, I got the idea of writing this degree project. So far there are not too many reports
written about safety for the worker nor the animal. Therefore it will fit in with a report
about safe handling of free stalled cattle.
The Swedish Board of Agriculture would also like to do an information material about
outside stalled cattle with this degree project as a background.
The collecting of material was made by visiting farmers. The goal was to visit 15 ? 20
herds and when this is being written 19 herds have been visited.
Utvärdering av skalväggar som byggnadsmetod
Granskande av ritningar, tidsplaner och kalkyler för referensprojektet Hus N i Växjö har hjälpt oss kartlägga skalväggars för- och nackdelar. Från intervjuer har vi sedan kunnat se liknelser och skillnader om vad olika yrkesfolk i samma bransch tycker, sedan därifrån dragit slutsatser. Det är inte alltid enkelt att avgöra vilken byggnadsmetod som är att föredra för att projektet ska vara kostnadseffektivt, prefabricerat eller platsbyggd. Faktorer som byggnadens konstruktion, årstid, arbetsmiljö, resurser, tid och kostnad ska ta hänsyns till.Genom att planera bättre, öka förtillverkningen, skapa en bättre samverkan mellan byggherrar, konsulter, entreprenörer, underentreprenörer och materialleverantörer, så anser man allmänt att man kan öka industrialiseringen av byggandet. Då man kan få kortare byggtider och lägre totalkostnader. .
Studentbostäder i trä med Prefab-teknik
The Results of this thesis was the creation of two designed house variants with a module toall the apartments. In addition till the first module there are three other modules ofapartments that can be put in the houses if it so needs. The house are volume prefabricatedand are placed on site in a way that it create an enclosure of the area which faces against thenature and car parks also lies hidden behind these houses.For the actual structure, a cross beam was created to carry the floor above and it is supportby all four walls. The structure between the first and the second floor has no "syll" butinstead there are two differently alternative to linking the floors in order so that it will notmove. The reason with this solution was that there will not be any subsidence when theforces from above are pressed down ward.
Företagsstudie om värmeöverföring : Beskrivning av värmeflöden hos en lagerbyggnad
The study took place at a food corporation in Växjö, Sweden. It describes a building that contains four tanks in which glucose syrup is stored. The purpose of the study was to calculate the amount of heat that leaves the building and the amount of heat that is supplied by the installed heating equipment. Before the calculations could be implemented, all the systems that supply the building with heat had to be examined. With a small amount of information from earlier studies, the work to gather all the data necessary for the calculations began.
Stenebergs sockerbruk: en fallstudie av en timmerstomme fr?n 1739
Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in
1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood.
Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there
exists today a surprisingly low amount of documentation of the building itself. In order to
enhance the existing and lacking building documentation, this case study aims to shed light
on the building's log-timber built frame, focusing on how it was constructed, how the long
lengths of its walls were handled and what type of joinery and tools were used.
A thorough investigation of the building is conducted on site, followed by gathering of
information which is then presented through text and illustrations. The findings indicate the
orientation of timbers, location of joints and scarfs as well as tool marks which together
contribute to the forming of a basis of understanding of the building's construction..
Skadegörelse klotter nedskräpning förbjuden : Graffitiborttagning som ikonoklasm
This essay concerns graffiti, and in particular graffiti removal regarded as iconoclasm.Graffiti is described as a visual symbol laden with both negative and positive values, and sometimes as a meaningful expression in the urban public space. One problem with graffiti as a field of study is the diversity of both the meaning of the term as well as the diversity of the phenomenon itself. Therefore I have defined the term graffiti as follows: words and images painted on public walls by a person usually in an unauthorised manner. Specific examples of graffiti and related phenomena are presented. Within the Swedish anti-graffiti discourse the pejorative term klotter (scribbling) is used to describe what I above define as graffiti.
Prins Eugen som monumentalmålare : A study of mural painting as an artform
The aim of this essay is to examine the relationship between picture and room, between wallpainting and architecture. The basis for such exploration is the mural painting in Sweden at the turn of the 20th century, and the artist in focus is Prince Eugen (1865-1947).His works "Sommar"(1904), "Rimfrosr"(1909) & "Staden vid vattnet"(1922) and the rooms in which they are in make for an anlysis concerning how the totality of the space is experienced by the viewer.The main issue in mentioned expeience is how the mural is perceived with regard to the other elements in the room. And here, the walls' "flatness" enhancing its decorative qualities plays in. The problem with a mural built on the principles of perspective becomes evident when a wall is seen to vanish through the painting of an illusion on it..